lkml.org 
[lkml]   [2012]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] sil3531: has no PM capability, remove support.
From
Date
On Mo, 2012-04-09 at 10:51 -0400, Jeff Garzik wrote:
> On 04/09/2012 10:14 AM, philby john wrote:
> > From: Philby John<pjohn@mvista.com>
> > Date: Mon, 9 Apr 2012 19:09:51 +0530
> > Subject: [PATCH] sil3531: has no PM capability, remove support.
> >
> > SATA sil3531 does not support Power Management Capability and
> > as per the manual Bit [31:27] is hardwired to 00h.
> > Otherwise, when the device goes into suspend/resume the Power
> > Management Control + Status registers are accessed and the
> > arch specific readl()/__raw_readl() calls block indefinitely.
> >
> > This patch sets the PCI_DEV_FLAGS_NO_D3 flag by which the if
> > condition in pci_set_power_state() evaluates to true and
> > pci_raw_set_power_state() functions are not executed.
> >
> > Signed-off-by: Philby John<pjohn@mvista.com>
> > Signed-off-by: Johnny Chiang<Johnny.Chiang@caviumnetworks.com>
> > ---
> > drivers/pci/pci.c | 1 +
> > 1 files changed, 1 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index 8156744..129120d 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -1863,6 +1863,7 @@ void pci_pm_init(struct pci_dev *dev)
> > pci_pme_active(dev, false);
> > } else {
> > dev->pme_support = 0;
> > + dev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
>
> This patch applies to -every- piece of PCI hardware out there, not just
> the sil3531...
>

But if pme_support is zero, isn't it ok to set dev_flags to
PCI_DEV_FLAGS_NO_D3 ?

Regards,
Philby




\
 
 \ /
  Last update: 2012-04-09 17:09    [W:0.027 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site