lkml.org 
[lkml]   [2012]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2 6/7] mtip32xx: handling of commands in various scenarios
* If a ncq  command time out and a non-ncq command is active, skip restart port
* Queue(pause) ncq commands during operations spanning more than one non-ncq commands - secure erase, download microcode
* When a non-ncq command is active, allow incoming non-ncq commands to wait instead of failing back
* Changed timeout for download microcode and smart commands
* If the device in write protect mode, fail all writes (do not send to device)
* Set maximum retries to 2

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
---
drivers/block/mtip32xx/mtip32xx.c | 144 +++++++++++++++++++++++++++----------
drivers/block/mtip32xx/mtip32xx.h | 39 +++++++----
2 files changed, 132 insertions(+), 51 deletions(-)

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index e57864a..47404ef 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -436,7 +436,8 @@ static void mtip_init_port(struct mtip_port *port)
writel(0xFFFFFFFF, port->completed[i]);

/* Clear any pending interrupts for this port */
- writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT);
+ writel(readl(port->dd->mmio + PORT_IRQ_STAT),
+ port->dd->mmio + PORT_IRQ_STAT);

/* Clear any pending interrupts on the HBA. */
writel(readl(port->dd->mmio + HOST_IRQ_STAT),
@@ -541,6 +542,7 @@ static void mtip_timeout_function(unsigned long int data)
int tag, cmdto_cnt = 0;
unsigned int bit, group;
unsigned int num_command_slots = port->dd->slot_groups * 32;
+ unsigned long to;

if (unlikely(!port))
return;
@@ -605,7 +607,7 @@ static void mtip_timeout_function(unsigned long int data)
}
}

- if (cmdto_cnt) {
+ if (cmdto_cnt && !test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
dev_warn(&port->dd->pdev->dev,
"%d commands timed out: restarting port",
cmdto_cnt);
@@ -614,6 +616,21 @@ static void mtip_timeout_function(unsigned long int data)
wake_up_interruptible(&port->svc_wait);
}

+ if (port->ic_pause_timer) {
+ to = port->ic_pause_timer + msecs_to_jiffies(1000);
+ if (time_after(jiffies, to)) {
+ if (!test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
+ port->ic_pause_timer = 0;
+ clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
+ wake_up_interruptible(&port->svc_wait);
+ }
+
+
+ }
+ }
+
/* Restart the timer */
mod_timer(&port->cmd_timer,
jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
@@ -1105,6 +1122,39 @@ static void mtip_issue_non_ncq_command(struct mtip_port *port, int tag)
port->cmd_issue[MTIP_TAG_INDEX(tag)]);
}

+static bool mtip_pause_ncq(struct mtip_port *port,
+ struct host_to_dev_fis *fis)
+{
+ struct host_to_dev_fis *reply;
+ unsigned long task_file_data;
+
+ reply = port->rxfis + RX_FIS_D2H_REG;
+ task_file_data = readl(port->mmio+PORT_TFDATA);
+
+ if ((task_file_data & 1) || (fis->command == ATA_CMD_SEC_ERASE_UNIT))
+ return false;
+
+ if (fis->command == ATA_CMD_SEC_ERASE_PREP) {
+ set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+ port->ic_pause_timer = jiffies;
+ return true;
+ } else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) &&
+ (fis->features == 0x03)) {
+ set_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
+ port->ic_pause_timer = jiffies;
+ return true;
+ } else if ((fis->command == ATA_CMD_SEC_ERASE_UNIT) ||
+ ((fis->command == 0xFC) &&
+ (fis->features == 0x27 || fis->features == 0x72 ||
+ fis->features == 0x62 || fis->features == 0x26))) {
+ /* Com reset after secure erase or lowlevel format */
+ mtip_restart_port(port);
+ return false;
+ }
+
+ return false;
+}
+
/*
* Wait for port to quiesce
*
@@ -1176,8 +1226,9 @@ static int mtip_exec_internal_command(struct mtip_port *port,
{
struct mtip_cmd_sg *command_sg;
DECLARE_COMPLETION_ONSTACK(wait);
- int rv = 0;
+ int rv = 0, ready2go = 1;
struct mtip_cmd *int_cmd = &port->commands[MTIP_TAG_INTERNAL];
+ unsigned long to;

/* Make sure the buffer is 8 byte aligned. This is asic specific. */
if (buffer & 0x00000007) {
@@ -1186,13 +1237,26 @@ static int mtip_exec_internal_command(struct mtip_port *port,
return -EFAULT;
}

- /* Only one internal command should be running at a time */
- if (test_and_set_bit(MTIP_TAG_INTERNAL, port->allocated)) {
+ to = jiffies + msecs_to_jiffies(timeout);
+ do {
+ ready2go = !test_and_set_bit(MTIP_TAG_INTERNAL,
+ port->allocated);
+ if (ready2go)
+ break;
+ mdelay(100);
+ } while (time_before(jiffies, to));
+ if (!ready2go) {
dev_warn(&port->dd->pdev->dev,
- "Internal command already active\n");
+ "Internal cmd active. new cmd [%02X]\n", fis->command);
return -EBUSY;
}
set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
+ port->ic_pause_timer = 0;
+
+ if (fis->command == ATA_CMD_SEC_ERASE_UNIT)
+ clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+ else if (fis->command == ATA_CMD_DOWNLOAD_MICRO)
+ clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);

if (atomic == GFP_KERNEL) {
if (fis->command != ATA_CMD_STANDBYNOW1) {
@@ -1314,6 +1378,10 @@ exec_ic_exit:
/* Clear the allocated and active bits for the internal command. */
atomic_set(&int_cmd->active, 0);
release_slot(port, MTIP_TAG_INTERNAL);
+ if (rv >= 0 && mtip_pause_ncq(port, fis)) {
+ /* NCQ paused */
+ return rv;
+ }
clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
wake_up_interruptible(&port->svc_wait);

@@ -1767,8 +1835,7 @@ static int exec_drive_task(struct mtip_port *port, u8 *command)
fis.cyl_hi = command[5];
fis.device = command[6] & ~0x10; /* Clear the dev bit*/

-
- dbg_printk(MTIP_DRV_NAME "%s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n",
+ dbg_printk(MTIP_DRV_NAME " %s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n",
__func__,
command[0],
command[1],
@@ -1795,7 +1862,7 @@ static int exec_drive_task(struct mtip_port *port, u8 *command)
command[4] = reply->cyl_low;
command[5] = reply->cyl_hi;

- dbg_printk(MTIP_DRV_NAME "%s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n",
+ dbg_printk(MTIP_DRV_NAME " %s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n",
__func__,
command[0],
command[1],
@@ -1838,7 +1905,7 @@ static int exec_drive_command(struct mtip_port *port, u8 *command,
}

dbg_printk(MTIP_DRV_NAME
- "%s: User Command: cmd %x, sect %x, "
+ " %s: User Command: cmd %x, sect %x, "
"feat %x, sectcnt %x\n",
__func__,
command[0],
@@ -1867,7 +1934,7 @@ static int exec_drive_command(struct mtip_port *port, u8 *command,
command[2] = command[3];

dbg_printk(MTIP_DRV_NAME
- "%s: Completion Status: stat %x, "
+ " %s: Completion Status: stat %x, "
"err %x, cmd %x\n",
__func__,
command[0],
@@ -2070,9 +2137,10 @@ static int exec_drive_taskfile(struct driver_data *dd,
}

dbg_printk(MTIP_DRV_NAME
- "taskfile: cmd %x, feat %x, nsect %x,"
+ " %s: cmd %x, feat %x, nsect %x,"
" sect/lbal %x, lcyl/lbam %x, hcyl/lbah %x,"
" head/dev %x\n",
+ __func__,
fis.command,
fis.features,
fis.sect_count,
@@ -2083,8 +2151,8 @@ static int exec_drive_taskfile(struct driver_data *dd,

switch (fis.command) {
case ATA_CMD_DOWNLOAD_MICRO:
- /* Change timeout for Download Microcode to 60 seconds.*/
- timeout = 60000;
+ /* Change timeout for Download Microcode to 2 minutes */
+ timeout = 120000;
break;
case ATA_CMD_SEC_ERASE_UNIT:
/* Change timeout for Security Erase Unit to 4 minutes.*/
@@ -2100,8 +2168,8 @@ static int exec_drive_taskfile(struct driver_data *dd,
timeout = 10000;
break;
case ATA_CMD_SMART:
- /* Change timeout for vendor unique command to 10 secs */
- timeout = 10000;
+ /* Change timeout for vendor unique command to 15 secs */
+ timeout = 15000;
break;
default:
timeout = MTIP_IOCTL_COMMAND_TIMEOUT_MS;
@@ -2163,18 +2231,8 @@ static int exec_drive_taskfile(struct driver_data *dd,
req_task->hob_ports[1] = reply->features_ex;
req_task->hob_ports[2] = reply->sect_cnt_ex;
}
-
- /* Com rest after secure erase or lowlevel format */
- if (((fis.command == ATA_CMD_SEC_ERASE_UNIT) ||
- ((fis.command == 0xFC) &&
- (fis.features == 0x27 || fis.features == 0x72 ||
- fis.features == 0x62 || fis.features == 0x26))) &&
- !(reply->command & 1)) {
- mtip_restart_port(dd->port);
- }
-
dbg_printk(MTIP_DRV_NAME
- "%s: Completion: stat %x,"
+ " %s: Completion: stat %x,"
"err %x, sect_cnt %x, lbalo %x,"
"lbamid %x, lbahi %x, dev %x\n",
__func__,
@@ -2396,8 +2454,7 @@ static void mtip_hw_submit_io(struct driver_data *dd, sector_t start,
* To prevent this command from being issued
* if an internal command is in progress or error handling is active.
*/
- if (unlikely(test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) ||
- test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags))) {
+ if (port->flags & MTIP_PF_PAUSE_IO) {
set_bit(tag, port->cmds_to_issue);
set_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags);
return;
@@ -2726,8 +2783,7 @@ static int mtip_service_thread(void *data)
* is in progress nor error handling is active
*/
wait_event_interruptible(port->svc_wait, (port->flags) &&
- !test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) &&
- !test_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags));
+ !(port->flags & MTIP_PF_PAUSE_IO));

if (kthread_should_stop())
break;
@@ -2735,6 +2791,7 @@ static int mtip_service_thread(void *data)
if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
&dd->dd_flag)))
break;
+
set_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags);
if (test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) {
slot = 1;
@@ -2773,7 +2830,7 @@ static int mtip_service_thread(void *data)
}
clear_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags);

- if (test_bit(MTIP_PF_SVC_THD_SHOULD_STOP_BIT, &port->flags))
+ if (test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags))
break;
}
return 0;
@@ -3421,9 +3478,22 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio)
int nents = 0;
int tag = 0;

- if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) {
- bio_endio(bio, -ENXIO);
- return;
+ if (unlikely(dd->dd_flag & MTIP_DDF_STOP_IO)) {
+ if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+ &dd->dd_flag))) {
+ bio_endio(bio, -ENXIO);
+ return;
+ }
+ if (unlikely(test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))) {
+ bio_endio(bio, -ENODATA);
+ return;
+ }
+ if (unlikely(test_bit(MTIP_DDF_WRITE_PROTECT_BIT,
+ &dd->dd_flag) &&
+ bio_data_dir(bio))) {
+ bio_endio(bio, -ENODATA);
+ return;
+ }
}

if (unlikely(!bio_has_data(bio))) {
@@ -3599,7 +3669,7 @@ start_service_thread:
dd, thd_name);

if (IS_ERR(dd->mtip_svc_handler)) {
- printk(KERN_ERR "mtip32xx: service thread failed to start\n");
+ dev_err(&dd->pdev->dev, "service thread failed to start\n");
dd->mtip_svc_handler = NULL;
rv = -EFAULT;
goto kthread_run_error;
@@ -3648,7 +3718,7 @@ static int mtip_block_remove(struct driver_data *dd)
struct kobject *kobj;

if (dd->mtip_svc_handler) {
- set_bit(MTIP_PF_SVC_THD_SHOULD_STOP_BIT, &dd->port->flags);
+ set_bit(MTIP_PF_SVC_THD_STOP_BIT, &dd->port->flags);
wake_up_interruptible(&dd->port->svc_wait);
kthread_stop(dd->mtip_svc_handler);
}
diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h
index 5ad2d79..4ef5833 100644
--- a/drivers/block/mtip32xx/mtip32xx.h
+++ b/drivers/block/mtip32xx/mtip32xx.h
@@ -34,8 +34,8 @@
/* offset of Device Control register in PCIe extended capabilites space */
#define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48

-/* # of times to retry timed out IOs */
-#define MTIP_MAX_RETRIES 5
+/* # of times to retry timed out/failed IOs */
+#define MTIP_MAX_RETRIES 2

/* Various timeout values in ms */
#define MTIP_NCQ_COMMAND_TIMEOUT_MS 5000
@@ -114,22 +114,32 @@
#define __force_bit2int (unsigned int __force)

/* below are bit numbers in 'flags' defined in mtip_port */
-#define MTIP_PF_IC_ACTIVE_BIT 0
-#define MTIP_PF_EH_ACTIVE_BIT 1
-#define MTIP_PF_SVC_THD_ACTIVE_BIT 2
-#define MTIP_PF_ISSUE_CMDS_BIT 4
-#define MTIP_PF_REBUILD_BIT 5
-#define MTIP_PF_SVC_THD_SHOULD_STOP_BIT 8
+#define MTIP_PF_IC_ACTIVE_BIT 0 /* pio/ioctl */
+#define MTIP_PF_EH_ACTIVE_BIT 1 /* error handling */
+#define MTIP_PF_SE_ACTIVE_BIT 2 /* secure erase */
+#define MTIP_PF_DM_ACTIVE_BIT 3 /* download microcde */
+#define MTIP_PF_PAUSE_IO ((1 << MTIP_PF_IC_ACTIVE_BIT) | \
+ (1 << MTIP_PF_EH_ACTIVE_BIT) | \
+ (1 << MTIP_PF_SE_ACTIVE_BIT) | \
+ (1 << MTIP_PF_DM_ACTIVE_BIT))
+
+#define MTIP_PF_SVC_THD_ACTIVE_BIT 4
+#define MTIP_PF_ISSUE_CMDS_BIT 5
+#define MTIP_PF_REBUILD_BIT 6
+#define MTIP_PF_SVC_THD_STOP_BIT 8

/* below are bit numbers in 'dd_flag' defined in driver_data */
#define MTIP_DDF_REMOVE_PENDING_BIT 1
-#define MTIP_DDF_RESUME_BIT 2
-#define MTIP_DDF_CLEANUP_BIT 3
-#define MTIP_DDF_INIT_DONE_BIT 4
+#define MTIP_DDF_OVER_TEMP_BIT 2
+#define MTIP_DDF_WRITE_PROTECT_BIT 3
+#define MTIP_DDF_STOP_IO ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | \
+ (1 << MTIP_DDF_OVER_TEMP_BIT) | \
+ (1 << MTIP_DDF_WRITE_PROTECT_BIT))

-#define MTIP_DDF_WRITE_PROTECT_BIT 5
-#define MTIP_DDF_OVER_TEMP_BIT 6
-#define MTIP_DDF_REBUILD_FAILED_BIT 7
+#define MTIP_DDF_CLEANUP_BIT 5
+#define MTIP_DDF_RESUME_BIT 6
+#define MTIP_DDF_INIT_DONE_BIT 7
+#define MTIP_DDF_REBUILD_FAILED_BIT 8

__packed struct smart_attr{
u8 attr_id;
@@ -393,6 +403,7 @@ struct mtip_port {
* Timer used to complete commands that have been active for too long.
*/
struct timer_list cmd_timer;
+ unsigned long ic_pause_timer;
/*
* Semaphore used to block threads if there are no
* command slots available.
--
1.7.1


\
 
 \ /
  Last update: 2012-04-09 04:33    [W:0.031 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site