lkml.org 
[lkml]   [2012]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [ath9k-devel] 3.3.1 ath9k regression
I see the regression on my WPEA-127N systems as well.

With the patch applied to 3.3.1, I see never ending stream of
auth timeouts (this log is watching 'iw event' output)

power-management is OFF on my system, and using nohwcrypt,
in case that matters.

This is with 10 virtual stations.

2012-04-05 11:16:14.155 1.1: sta5 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300
5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825, ""
2012-04-05 11:16:15.266 1.1: sta0 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta1 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta2 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta3 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta4 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta6 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta7 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta8 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta9 (phy #0): auth: timed out
2012-04-05 11:16:15.266 1.1: sta5 (phy #0): auth: timed out
2012-04-05 11:16:19.400 1.1: sta0 (phy #0): scan started
2012-04-05 11:16:23.302 1.1: sta0 (phy #0): scan finished: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300
5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825, ""
2012-04-05 11:16:24.406 1.1: sta1 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta2 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta3 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta4 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta5 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta6 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta7 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta8 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta9 (phy #0): auth: timed out
2012-04-05 11:16:24.406 1.1: sta0 (phy #0): auth: timed out

I reverted the patch and then it associates immediately.

Occasionally, I would see things associate and run OK with the patch
in place, but it always took a lot of re-tries to associate
even when it did work.

I can easily test patches or try things if anyone has any ideas.

Thanks,
Ben

--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com



\
 
 \ /
  Last update: 2012-04-05 20:29    [W:0.131 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site