lkml.org 
[lkml]   [2012]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: cache-l2x0.c: save aux ctrl for resume in case that l2x0 is enabled before init
On 04/26/2012 06:56 PM, Catalin Marinas wrote:
> On Thu, Apr 26, 2012 at 11:48:18AM +0100, Yilu Mao wrote:
>> On 04/26/2012 06:38 PM, Catalin Marinas wrote:
>>> On Thu, Apr 26, 2012 at 11:35:39AM +0100, Yilu Mao wrote:
>>>> On 04/26/2012 06:28 PM, Catalin Marinas wrote:
>>>>> On Thu, Apr 26, 2012 at 11:09:26AM +0100, Yilu Mao wrote:
>>>>>> On 04/26/2012 05:44 PM, Catalin Marinas wrote:
>>>>>>> On Thu, Apr 26, 2012 at 10:25:31AM +0100, Yilu Mao wrote:
>>>>>>>> On 04/26/2012 04:35 PM, Catalin Marinas wrote:
>>>>>>>>> On Thu, Apr 26, 2012 at 06:00:09AM +0100, Yilu Mao wrote:
>>>>>>>>>> On 04/24/2012 04:28 PM, Catalin Marinas wrote:
>>>>>>>>>>> On Tue, Apr 24, 2012 at 03:41:20AM +0100, Yilu Mao wrote:
>>>>>>>>>>>> + l2x0_saved_regs.aux_ctrl = aux;
>>>>>>>>>>>> +
>>>>>>>>>>>> aux&= aux_mask;
>>>>>>>>>>>> aux |= aux_val;
>>>>>>>>>>>
>>>>>>>>>>> I think that's the wrong place to save it, it should be after the
>>>>>>>>>>> masking was done.
>>>>>>>>>>>
>>>>>>>>>>> Anyway, if we cannot write this register in l2x0_init() because the L2
>>>>>>>>>>> was enabled, do we expect the L2 to be disabled during resume?
>>>>>>>>>>>
>>>>>>>>>> Sorry, I don't think so.
>>>>>>>>>> This is the right place to save it because we must make sure the saved
>>>>>>>>>> aux_ctrl is the same as what it is set.
>>>>>>>>>> If we save it after masking was done, the saved value will be different
>>>>>>>>>> because we can't actually change the real setting.
>>>>>>>>>
>>>>>>>>> And since we can't actually change the real setting on the resume path,
>>>>>>>>> why do we need to save it anyway. Is your L2 cache disabled on the
>>>>>>>>> resume path but not on the cold boot one?
>>>>>>>>
>>>>>>>> We can't change L2 aux ctrl setting when do init because it has been
>>>>>>>> enabled.
>>>>>>>
>>>>>>> This is normally for the case where the kernel running in non-secure
>>>>>>> mode is not allowed to write the L2 aux ctrl register. Does this
>>>>>>> permission change with core idle?
>>>>>>>
>>>>>> Yes, your understanding of previous mail is right. The L2 is enabled on
>>>>>> code boot and it is disabled on the resume in our case.
>>>>>
>>>>> But the kernel either runs in secure mode or the non-secure access to
>>>>> this register is allowed.
>>>>>
>>>>>> So if we don't have such patch, when core idle exit, L2 cache aux ctrl
>>>>>> register will be set to 0x0 because l2x0_saved_regs.aux_ctrl is not
>>>>>> initialized.
>>>>>
>>>>> You could still make sure that the mask passed doesn't affect the
>>>>> original setting and save it after masking.
>>>>>
>>>> Do you mean the code is like this:
>>>> aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
>>>> aux&= aux_mask;
>>>> l2x0_saved_regs.aux_ctrl = aux;
>>>>
>>>> Then the saved value is not the same as real setting. So the restored
>>>> value after core idle will not the same as before... This is not what we
>>>> expected.
>>>
>>> My point was that on your platform you pass an aux_mask that is meant to
>>> change the already set aux_ctlr value. Why do you pass such mask to be
>>> anything other than ~0UL in this case?
>>>
>> Sorry I still can't catch your point...
>> In our platform, we actually use ~0UL as aux mask.
>>
>> Anyway, the two arguments, aux_value and aux_mask, are both for changing
>> the original value set before kernel bootup. If L2 cache is enabled in
>> cold boot, both two arguments are useless because we can't set the
>> register. So we must make sure we can restore the original value after
>> core idle.
>
> So if your platform passes aux_mask = ~0UL and aux_val = 0, there is no
> change to the read aux_ctlr value.
>
> If for whatever reason (same binary running in different configuration)
> you need to pass the aux_mask and aux_val different from the above, then
> your argument makes sense. But I just want to be clear.
>
Actually, our arguments are aux_value = 0x30000000 and aux_mask = ~0UL.
I think it is also ok with my patch.
What do you think?

--
Thanks.

Best Wishes,
Yilu Mao


\
 
 \ /
  Last update: 2012-04-26 13:09    [W:0.171 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site