lkml.org 
[lkml]   [2012]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv4 1/2] drivers: input: keypad: Add device tree support
Hi Russell and Sourav,

On 04/25/2012 12:52 PM, Russell King - ARM Linux wrote:
> I think you and Roland Stigge need to put your heads together and come
> up with a common DT binding for matrix keypad devices, rather than
> inventing N different platform specific bindings.
>
>> +Required Board Specific Properties, in addition to those specified by
>> +the shared matrix-keyboard bindings:
>> +- keypad,num-rows: Number of row lines connected to the keypad
>> + controller.
>> +
>> +- keypad,num-columns: Number of column lines connected to the
>> + keypad controller.

Right - the LPC32xx key scanner always has a square matrix design (#rows
== #cols), but I'm fine with re-using properties "keypad,num-rows" and
"keypad,num-columns" instead of "nxp,matrix-size".

Besides, I still have "nxp,debounce-delay-ms" and "nxp,scan-delay-ms" -
do I need to change this to some default properties I don't know of (yet)?

And: I re-used the DT subnodes strategy for the keycodes ("linux,code")
of the samsung-keypad driver, see
Documentation/devicetree/bindings/input/samsung-keypad.txt - can I
continue using it?

Thanks in advance,

Roland


\
 
 \ /
  Last update: 2012-04-25 13:43    [W:0.884 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site