lkml.org 
[lkml]   [2012]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] AT91: Remove fixed mapping for AT91RM9200 ethernet
On 02/13/2012 05:20 PM, Jean-Christophe PLAGNIOL-VILLARD :
> From: Andrew Victor <avictor.za@gmail.com>
>
> The AT91RM9200 Ethernet controller still has a fixed IO mapping.
> So:
> * Remove the fixed IO mapping and AT91_VA_BASE_EMAC definition.
> * Pass the physical base-address via platform-resources to the driver.
> * Convert at91_ether.c driver to perform an ioremap().
> * Ethernet PHY detection needs to be performed during the driver
> initialization process, it can no longer be done first.
>
> Signed-off-by: Andrew Victor <linux@maxim.org.za>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> Cc: netdev@vger.kernel.org
> ---
> Hi David,
>
> If you don't mind I'll apply it via AT91 tree as it's part of a patch
> series to clean the at91

David,

It seems that this patch has not been noticed (which is understandable
as you were not in copy...).

As I have a bug fix for this driver, my question is: will it still be
possible for you to take this one in the net tree for 3.4-rc or will it
have to wait for 3.5?

Depending on your answer, I will send you my bug fix on top of this one
or as an independent patch.

Best regards,

> arch/arm/mach-at91/at91rm9200.c | 10 -
> arch/arm/mach-at91/at91rm9200_devices.c | 4 +-
> arch/arm/mach-at91/include/mach/hardware.h | 1 -
> drivers/net/ethernet/cadence/at91_ether.c | 527 +++++++++++++++-------------
> drivers/net/ethernet/cadence/at91_ether.h | 1 +
> 5 files changed, 287 insertions(+), 256 deletions(-)
>
> diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
> index c7efa17..92e0227 100644
> --- a/arch/arm/mach-at91/at91rm9200.c
> +++ b/arch/arm/mach-at91/at91rm9200.c
> @@ -25,15 +25,6 @@
> #include "clock.h"
> #include "sam9_smc.h"
>
> -static struct map_desc at91rm9200_io_desc[] __initdata = {
> - {
> - .virtual = AT91_VA_BASE_EMAC,
> - .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC),
> - .length = SZ_16K,
> - .type = MT_DEVICE,
> - },
> -};
> -
> /* --------------------------------------------------------------------
> * Clocks
> * -------------------------------------------------------------------- */
> @@ -314,7 +305,6 @@ static void __init at91rm9200_map_io(void)
> {
> /* Map peripherals */
> at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE);
> - iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
> }
>
> static void __init at91rm9200_ioremap_registers(void)
> diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
> index aca272b..04d6b16 100644
> --- a/arch/arm/mach-at91/at91rm9200_devices.c
> +++ b/arch/arm/mach-at91/at91rm9200_devices.c
> @@ -140,8 +140,8 @@ static struct macb_platform_data eth_data;
>
> static struct resource eth_resources[] = {
> [0] = {
> - .start = AT91_VA_BASE_EMAC,
> - .end = AT91_VA_BASE_EMAC + SZ_16K - 1,
> + .start = AT91RM9200_BASE_EMAC,
> + .end = AT91RM9200_BASE_EMAC + SZ_16K - 1,
> .flags = IORESOURCE_MEM,
> },
> [1] = {
> diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
> index e9e29a6..01db372 100644
> --- a/arch/arm/mach-at91/include/mach/hardware.h
> +++ b/arch/arm/mach-at91/include/mach/hardware.h
> @@ -94,7 +94,6 @@
> * Virtual to Physical Address mapping for IO devices.
> */
> #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
> -#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC)
>
> /* Internal SRAM is mapped below the IO devices */
> #define AT91_SRAM_MAX SZ_1M
> diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
> index 1a5b6ef..2b7d278 100644
> --- a/drivers/net/ethernet/cadence/at91_ether.c
> +++ b/drivers/net/ethernet/cadence/at91_ether.c
> @@ -30,6 +30,7 @@
> #include <linux/platform_device.h>
> #include <linux/clk.h>
> #include <linux/gfp.h>
> +#include <linux/phy.h>
>
> #include <asm/io.h>
> #include <asm/uaccess.h>
> @@ -51,21 +52,17 @@
> /*
> * Read from a EMAC register.
> */
> -static inline unsigned long at91_emac_read(unsigned int reg)
> +static inline unsigned long at91_emac_read(struct at91_private *lp, unsigned int reg)
> {
> - void __iomem *emac_base = (void __iomem *)AT91_VA_BASE_EMAC;
> -
> - return __raw_readl(emac_base + reg);
> + return __raw_readl(lp->emac_base + reg);
> }
>
> /*
> * Write to a EMAC register.
> */
> -static inline void at91_emac_write(unsigned int reg, unsigned long value)
> +static inline void at91_emac_write(struct at91_private *lp, unsigned int reg, unsigned long value)
> {
> - void __iomem *emac_base = (void __iomem *)AT91_VA_BASE_EMAC;
> -
> - __raw_writel(value, emac_base + reg);
> + __raw_writel(value, lp->emac_base + reg);
> }
>
> /* ........................... PHY INTERFACE ........................... */
> @@ -75,32 +72,33 @@ static inline void at91_emac_write(unsigned int reg, unsigned long value)
> * When not called from an interrupt-handler, access to the PHY must be
> * protected by a spinlock.
> */
> -static void enable_mdi(void)
> +static void enable_mdi(struct at91_private *lp)
> {
> unsigned long ctl;
>
> - ctl = at91_emac_read(AT91_EMAC_CTL);
> - at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_MPE); /* enable management port */
> + ctl = at91_emac_read(lp, AT91_EMAC_CTL);
> + at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_MPE); /* enable management port */
> }
>
> /*
> * Disable the MDIO bit in the MAC control register
> */
> -static void disable_mdi(void)
> +static void disable_mdi(struct at91_private *lp)
> {
> unsigned long ctl;
>
> - ctl = at91_emac_read(AT91_EMAC_CTL);
> - at91_emac_write(AT91_EMAC_CTL, ctl & ~AT91_EMAC_MPE); /* disable management port */
> + ctl = at91_emac_read(lp, AT91_EMAC_CTL);
> + at91_emac_write(lp, AT91_EMAC_CTL, ctl & ~AT91_EMAC_MPE); /* disable management port */
> }
>
> /*
> * Wait until the PHY operation is complete.
> */
> -static inline void at91_phy_wait(void) {
> +static inline void at91_phy_wait(struct at91_private *lp)
> +{
> unsigned long timeout = jiffies + 2;
>
> - while (!(at91_emac_read(AT91_EMAC_SR) & AT91_EMAC_SR_IDLE)) {
> + while (!(at91_emac_read(lp, AT91_EMAC_SR) & AT91_EMAC_SR_IDLE)) {
> if (time_after(jiffies, timeout)) {
> printk("at91_ether: MIO timeout\n");
> break;
> @@ -113,28 +111,28 @@ static inline void at91_phy_wait(void) {
> * Write value to the a PHY register
> * Note: MDI interface is assumed to already have been enabled.
> */
> -static void write_phy(unsigned char phy_addr, unsigned char address, unsigned int value)
> +static void write_phy(struct at91_private *lp, unsigned char phy_addr, unsigned char address, unsigned int value)
> {
> - at91_emac_write(AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_W
> + at91_emac_write(lp, AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_W
> | ((phy_addr & 0x1f) << 23) | (address << 18) | (value & AT91_EMAC_DATA));
>
> /* Wait until IDLE bit in Network Status register is cleared */
> - at91_phy_wait();
> + at91_phy_wait(lp);
> }
>
> /*
> * Read value stored in a PHY register.
> * Note: MDI interface is assumed to already have been enabled.
> */
> -static void read_phy(unsigned char phy_addr, unsigned char address, unsigned int *value)
> +static void read_phy(struct at91_private *lp, unsigned char phy_addr, unsigned char address, unsigned int *value)
> {
> - at91_emac_write(AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_R
> + at91_emac_write(lp, AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_R
> | ((phy_addr & 0x1f) << 23) | (address << 18));
>
> /* Wait until IDLE bit in Network Status register is cleared */
> - at91_phy_wait();
> + at91_phy_wait(lp);
>
> - *value = at91_emac_read(AT91_EMAC_MAN) & AT91_EMAC_DATA;
> + *value = at91_emac_read(lp, AT91_EMAC_MAN) & AT91_EMAC_DATA;
> }
>
> /* ........................... PHY MANAGEMENT .......................... */
> @@ -158,13 +156,13 @@ static void update_linkspeed(struct net_device *dev, int silent)
> }
>
> /* Link up, or auto-negotiation still in progress */
> - read_phy(lp->phy_address, MII_BMSR, &bmsr);
> - read_phy(lp->phy_address, MII_BMCR, &bmcr);
> + read_phy(lp, lp->phy_address, MII_BMSR, &bmsr);
> + read_phy(lp, lp->phy_address, MII_BMCR, &bmcr);
> if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
> if (!(bmsr & BMSR_ANEGCOMPLETE))
> return; /* Do nothing - another interrupt generated when negotiation complete */
>
> - read_phy(lp->phy_address, MII_LPA, &lpa);
> + read_phy(lp, lp->phy_address, MII_LPA, &lpa);
> if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;
> else speed = SPEED_10;
> if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) duplex = DUPLEX_FULL;
> @@ -175,7 +173,7 @@ static void update_linkspeed(struct net_device *dev, int silent)
> }
>
> /* Update the MAC */
> - mac_cfg = at91_emac_read(AT91_EMAC_CFG) & ~(AT91_EMAC_SPD | AT91_EMAC_FD);
> + mac_cfg = at91_emac_read(lp, AT91_EMAC_CFG) & ~(AT91_EMAC_SPD | AT91_EMAC_FD);
> if (speed == SPEED_100) {
> if (duplex == DUPLEX_FULL) /* 100 Full Duplex */
> mac_cfg |= AT91_EMAC_SPD | AT91_EMAC_FD;
> @@ -186,7 +184,7 @@ static void update_linkspeed(struct net_device *dev, int silent)
> mac_cfg |= AT91_EMAC_FD;
> else {} /* 10 Half Duplex */
> }
> - at91_emac_write(AT91_EMAC_CFG, mac_cfg);
> + at91_emac_write(lp, AT91_EMAC_CFG, mac_cfg);
>
> if (!silent)
> printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
> @@ -207,34 +205,34 @@ static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id)
> * level-triggering. We therefore have to check if the PHY actually has
> * an IRQ pending.
> */
> - enable_mdi();
> + enable_mdi(lp);
> if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
> - read_phy(lp->phy_address, MII_DSINTR_REG, &phy); /* ack interrupt in Davicom PHY */
> + read_phy(lp, lp->phy_address, MII_DSINTR_REG, &phy); /* ack interrupt in Davicom PHY */
> if (!(phy & (1 << 0)))
> goto done;
> }
> else if (lp->phy_type == MII_LXT971A_ID) {
> - read_phy(lp->phy_address, MII_ISINTS_REG, &phy); /* ack interrupt in Intel PHY */
> + read_phy(lp, lp->phy_address, MII_ISINTS_REG, &phy); /* ack interrupt in Intel PHY */
> if (!(phy & (1 << 2)))
> goto done;
> }
> else if (lp->phy_type == MII_BCM5221_ID) {
> - read_phy(lp->phy_address, MII_BCMINTR_REG, &phy); /* ack interrupt in Broadcom PHY */
> + read_phy(lp, lp->phy_address, MII_BCMINTR_REG, &phy); /* ack interrupt in Broadcom PHY */
> if (!(phy & (1 << 0)))
> goto done;
> }
> else if (lp->phy_type == MII_KS8721_ID) {
> - read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
> + read_phy(lp, lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
> if (!(phy & ((1 << 2) | 1)))
> goto done;
> }
> - else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */
> - read_phy(lp->phy_address, MII_T78Q21INT_REG, &phy);
> + else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */
> + read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &phy);
> if (!(phy & ((1 << 2) | 1)))
> goto done;
> }
> else if (lp->phy_type == MII_DP83848_ID) {
> - read_phy(lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */
> + read_phy(lp, lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */
> if (!(phy & (1 << 7)))
> goto done;
> }
> @@ -242,7 +240,7 @@ static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id)
> update_linkspeed(dev, 0);
>
> done:
> - disable_mdi();
> + disable_mdi(lp);
>
> return IRQ_HANDLED;
> }
> @@ -273,41 +271,41 @@ static void enable_phyirq(struct net_device *dev)
> }
>
> spin_lock_irq(&lp->lock);
> - enable_mdi();
> + enable_mdi(lp);
>
> if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
> - read_phy(lp->phy_address, MII_DSINTR_REG, &dsintr);
> + read_phy(lp, lp->phy_address, MII_DSINTR_REG, &dsintr);
> dsintr = dsintr & ~0xf00; /* clear bits 8..11 */
> - write_phy(lp->phy_address, MII_DSINTR_REG, dsintr);
> + write_phy(lp, lp->phy_address, MII_DSINTR_REG, dsintr);
> }
> else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
> - read_phy(lp->phy_address, MII_ISINTE_REG, &dsintr);
> + read_phy(lp, lp->phy_address, MII_ISINTE_REG, &dsintr);
> dsintr = dsintr | 0xf2; /* set bits 1, 4..7 */
> - write_phy(lp->phy_address, MII_ISINTE_REG, dsintr);
> + write_phy(lp, lp->phy_address, MII_ISINTE_REG, dsintr);
> }
> else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
> dsintr = (1 << 15) | ( 1 << 14);
> - write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
> + write_phy(lp, lp->phy_address, MII_BCMINTR_REG, dsintr);
> }
> else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
> dsintr = (1 << 10) | ( 1 << 8);
> - write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
> + write_phy(lp, lp->phy_address, MII_TPISTATUS, dsintr);
> }
> else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
> - read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
> + read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &dsintr);
> dsintr = dsintr | 0x500; /* set bits 8, 10 */
> - write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
> + write_phy(lp, lp->phy_address, MII_T78Q21INT_REG, dsintr);
> }
> else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
> - read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
> + read_phy(lp, lp->phy_address, MII_DPMISR_REG, &dsintr);
> dsintr = dsintr | 0x3c; /* set bits 2..5 */
> - write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
> - read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
> + write_phy(lp, lp->phy_address, MII_DPMISR_REG, dsintr);
> + read_phy(lp, lp->phy_address, MII_DPMICR_REG, &dsintr);
> dsintr = dsintr | 0x3; /* set bits 0,1 */
> - write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
> + write_phy(lp, lp->phy_address, MII_DPMICR_REG, dsintr);
> }
>
> - disable_mdi();
> + disable_mdi(lp);
> spin_unlock_irq(&lp->lock);
> }
>
> @@ -326,43 +324,43 @@ static void disable_phyirq(struct net_device *dev)
> }
>
> spin_lock_irq(&lp->lock);
> - enable_mdi();
> + enable_mdi(lp);
>
> if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
> - read_phy(lp->phy_address, MII_DSINTR_REG, &dsintr);
> + read_phy(lp, lp->phy_address, MII_DSINTR_REG, &dsintr);
> dsintr = dsintr | 0xf00; /* set bits 8..11 */
> - write_phy(lp->phy_address, MII_DSINTR_REG, dsintr);
> + write_phy(lp, lp->phy_address, MII_DSINTR_REG, dsintr);
> }
> else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
> - read_phy(lp->phy_address, MII_ISINTE_REG, &dsintr);
> + read_phy(lp, lp->phy_address, MII_ISINTE_REG, &dsintr);
> dsintr = dsintr & ~0xf2; /* clear bits 1, 4..7 */
> - write_phy(lp->phy_address, MII_ISINTE_REG, dsintr);
> + write_phy(lp, lp->phy_address, MII_ISINTE_REG, dsintr);
> }
> else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
> - read_phy(lp->phy_address, MII_BCMINTR_REG, &dsintr);
> + read_phy(lp, lp->phy_address, MII_BCMINTR_REG, &dsintr);
> dsintr = ~(1 << 14);
> - write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
> + write_phy(lp, lp->phy_address, MII_BCMINTR_REG, dsintr);
> }
> else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
> - read_phy(lp->phy_address, MII_TPISTATUS, &dsintr);
> + read_phy(lp, lp->phy_address, MII_TPISTATUS, &dsintr);
> dsintr = ~((1 << 10) | (1 << 8));
> - write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
> + write_phy(lp, lp->phy_address, MII_TPISTATUS, dsintr);
> }
> else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
> - read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
> + read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &dsintr);
> dsintr = dsintr & ~0x500; /* clear bits 8, 10 */
> - write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
> + write_phy(lp, lp->phy_address, MII_T78Q21INT_REG, dsintr);
> }
> else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
> - read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
> + read_phy(lp, lp->phy_address, MII_DPMICR_REG, &dsintr);
> dsintr = dsintr & ~0x3; /* clear bits 0, 1 */
> - write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
> - read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
> + write_phy(lp, lp->phy_address, MII_DPMICR_REG, dsintr);
> + read_phy(lp, lp->phy_address, MII_DPMISR_REG, &dsintr);
> dsintr = dsintr & ~0x3c; /* clear bits 2..5 */
> - write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
> + write_phy(lp, lp->phy_address, MII_DPMISR_REG, dsintr);
> }
>
> - disable_mdi();
> + disable_mdi(lp);
> spin_unlock_irq(&lp->lock);
>
> irq_number = lp->board_data.phy_irq_pin;
> @@ -379,17 +377,17 @@ static void reset_phy(struct net_device *dev)
> unsigned int bmcr;
>
> spin_lock_irq(&lp->lock);
> - enable_mdi();
> + enable_mdi(lp);
>
> /* Perform PHY reset */
> - write_phy(lp->phy_address, MII_BMCR, BMCR_RESET);
> + write_phy(lp, lp->phy_address, MII_BMCR, BMCR_RESET);
>
> /* Wait until PHY reset is complete */
> do {
> - read_phy(lp->phy_address, MII_BMCR, &bmcr);
> + read_phy(lp, lp->phy_address, MII_BMCR, &bmcr);
> } while (!(bmcr & BMCR_RESET));
>
> - disable_mdi();
> + disable_mdi(lp);
> spin_unlock_irq(&lp->lock);
> }
> #endif
> @@ -399,13 +397,37 @@ static void at91ether_check_link(unsigned long dev_id)
> struct net_device *dev = (struct net_device *) dev_id;
> struct at91_private *lp = netdev_priv(dev);
>
> - enable_mdi();
> + enable_mdi(lp);
> update_linkspeed(dev, 1);
> - disable_mdi();
> + disable_mdi(lp);
>
> mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
> }
>
> +/*
> + * Perform any PHY-specific initialization.
> + */
> +static void __init initialize_phy(struct at91_private *lp)
> +{
> + unsigned int val;
> +
> + spin_lock_irq(&lp->lock);
> + enable_mdi(lp);
> +
> + if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
> + read_phy(lp, lp->phy_address, MII_DSCR_REG, &val);
> + if ((val & (1 << 10)) == 0) /* DSCR bit 10 is 0 -- fiber mode */
> + lp->phy_media = PORT_FIBRE;
> + } else if (machine_is_csb337()) {
> + /* mix link activity status into LED2 link state */
> + write_phy(lp, lp->phy_address, MII_LEDCTRL_REG, 0x0d22);
> + } else if (machine_is_ecbat91())
> + write_phy(lp, lp->phy_address, MII_LEDCTRL_REG, 0x156A);
> +
> + disable_mdi(lp);
> + spin_unlock_irq(&lp->lock);
> +}
> +
> /* ......................... ADDRESS MANAGEMENT ........................ */
>
> /*
> @@ -454,17 +476,19 @@ static short __init unpack_mac_address(struct net_device *dev, unsigned int hi,
> */
> static void __init get_mac_address(struct net_device *dev)
> {
> + struct at91_private *lp = netdev_priv(dev);
> +
> /* Check Specific-Address 1 */
> - if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA1H), at91_emac_read(AT91_EMAC_SA1L)))
> + if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA1H), at91_emac_read(lp, AT91_EMAC_SA1L)))
> return;
> /* Check Specific-Address 2 */
> - if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA2H), at91_emac_read(AT91_EMAC_SA2L)))
> + if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA2H), at91_emac_read(lp, AT91_EMAC_SA2L)))
> return;
> /* Check Specific-Address 3 */
> - if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA3H), at91_emac_read(AT91_EMAC_SA3L)))
> + if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA3H), at91_emac_read(lp, AT91_EMAC_SA3L)))
> return;
> /* Check Specific-Address 4 */
> - if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA4H), at91_emac_read(AT91_EMAC_SA4L)))
> + if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA4H), at91_emac_read(lp, AT91_EMAC_SA4L)))
> return;
>
> printk(KERN_ERR "at91_ether: Your bootloader did not configure a MAC address.\n");
> @@ -475,11 +499,13 @@ static void __init get_mac_address(struct net_device *dev)
> */
> static void update_mac_address(struct net_device *dev)
> {
> - at91_emac_write(AT91_EMAC_SA1L, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) | (dev->dev_addr[1] << 8) | (dev->dev_addr[0]));
> - at91_emac_write(AT91_EMAC_SA1H, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
> + struct at91_private *lp = netdev_priv(dev);
>
> - at91_emac_write(AT91_EMAC_SA2L, 0);
> - at91_emac_write(AT91_EMAC_SA2H, 0);
> + at91_emac_write(lp, AT91_EMAC_SA1L, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) | (dev->dev_addr[1] << 8) | (dev->dev_addr[0]));
> + at91_emac_write(lp, AT91_EMAC_SA1H, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
> +
> + at91_emac_write(lp, AT91_EMAC_SA2L, 0);
> + at91_emac_write(lp, AT91_EMAC_SA2H, 0);
> }
>
> /*
> @@ -559,6 +585,7 @@ static int hash_get_index(__u8 *addr)
> */
> static void at91ether_sethashtable(struct net_device *dev)
> {
> + struct at91_private *lp = netdev_priv(dev);
> struct netdev_hw_addr *ha;
> unsigned long mc_filter[2];
> unsigned int bitnr;
> @@ -570,8 +597,8 @@ static void at91ether_sethashtable(struct net_device *dev)
> mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
> }
>
> - at91_emac_write(AT91_EMAC_HSL, mc_filter[0]);
> - at91_emac_write(AT91_EMAC_HSH, mc_filter[1]);
> + at91_emac_write(lp, AT91_EMAC_HSL, mc_filter[0]);
> + at91_emac_write(lp, AT91_EMAC_HSH, mc_filter[1]);
> }
>
> /*
> @@ -579,9 +606,10 @@ static void at91ether_sethashtable(struct net_device *dev)
> */
> static void at91ether_set_multicast_list(struct net_device *dev)
> {
> + struct at91_private *lp = netdev_priv(dev);
> unsigned long cfg;
>
> - cfg = at91_emac_read(AT91_EMAC_CFG);
> + cfg = at91_emac_read(lp, AT91_EMAC_CFG);
>
> if (dev->flags & IFF_PROMISC) /* Enable promiscuous mode */
> cfg |= AT91_EMAC_CAF;
> @@ -589,34 +617,37 @@ static void at91ether_set_multicast_list(struct net_device *dev)
> cfg &= ~AT91_EMAC_CAF;
>
> if (dev->flags & IFF_ALLMULTI) { /* Enable all multicast mode */
> - at91_emac_write(AT91_EMAC_HSH, -1);
> - at91_emac_write(AT91_EMAC_HSL, -1);
> + at91_emac_write(lp, AT91_EMAC_HSH, -1);
> + at91_emac_write(lp, AT91_EMAC_HSL, -1);
> cfg |= AT91_EMAC_MTI;
> } else if (!netdev_mc_empty(dev)) { /* Enable specific multicasts */
> at91ether_sethashtable(dev);
> cfg |= AT91_EMAC_MTI;
> } else if (dev->flags & (~IFF_ALLMULTI)) { /* Disable all multicast mode */
> - at91_emac_write(AT91_EMAC_HSH, 0);
> - at91_emac_write(AT91_EMAC_HSL, 0);
> + at91_emac_write(lp, AT91_EMAC_HSH, 0);
> + at91_emac_write(lp, AT91_EMAC_HSL, 0);
> cfg &= ~AT91_EMAC_MTI;
> }
>
> - at91_emac_write(AT91_EMAC_CFG, cfg);
> + at91_emac_write(lp, AT91_EMAC_CFG, cfg);
> }
>
> /* ......................... ETHTOOL SUPPORT ........................... */
>
> static int mdio_read(struct net_device *dev, int phy_id, int location)
> {
> + struct at91_private *lp = netdev_priv(dev);
> unsigned int value;
>
> - read_phy(phy_id, location, &value);
> + read_phy(lp, phy_id, location, &value);
> return value;
> }
>
> static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
> {
> - write_phy(phy_id, location, value);
> + struct at91_private *lp = netdev_priv(dev);
> +
> + write_phy(lp, phy_id, location, value);
> }
>
> static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
> @@ -625,11 +656,11 @@ static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cm
> int ret;
>
> spin_lock_irq(&lp->lock);
> - enable_mdi();
> + enable_mdi(lp);
>
> ret = mii_ethtool_gset(&lp->mii, cmd);
>
> - disable_mdi();
> + disable_mdi(lp);
> spin_unlock_irq(&lp->lock);
>
> if (lp->phy_media == PORT_FIBRE) { /* override media type since mii.c doesn't know */
> @@ -646,11 +677,11 @@ static int at91ether_set_settings(struct net_device *dev, struct ethtool_cmd *cm
> int ret;
>
> spin_lock_irq(&lp->lock);
> - enable_mdi();
> + enable_mdi(lp);
>
> ret = mii_ethtool_sset(&lp->mii, cmd);
>
> - disable_mdi();
> + disable_mdi(lp);
> spin_unlock_irq(&lp->lock);
>
> return ret;
> @@ -662,11 +693,11 @@ static int at91ether_nwayreset(struct net_device *dev)
> int ret;
>
> spin_lock_irq(&lp->lock);
> - enable_mdi();
> + enable_mdi(lp);
>
> ret = mii_nway_restart(&lp->mii);
>
> - disable_mdi();
> + disable_mdi(lp);
> spin_unlock_irq(&lp->lock);
>
> return ret;
> @@ -696,9 +727,9 @@ static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
> return -EINVAL;
>
> spin_lock_irq(&lp->lock);
> - enable_mdi();
> + enable_mdi(lp);
> res = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL);
> - disable_mdi();
> + disable_mdi(lp);
> spin_unlock_irq(&lp->lock);
>
> return res;
> @@ -731,11 +762,11 @@ static void at91ether_start(struct net_device *dev)
> lp->rxBuffIndex = 0;
>
> /* Program address of descriptor list in Rx Buffer Queue register */
> - at91_emac_write(AT91_EMAC_RBQP, (unsigned long) dlist_phys);
> + at91_emac_write(lp, AT91_EMAC_RBQP, (unsigned long) dlist_phys);
>
> /* Enable Receive and Transmit */
> - ctl = at91_emac_read(AT91_EMAC_CTL);
> - at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_RE | AT91_EMAC_TE);
> + ctl = at91_emac_read(lp, AT91_EMAC_CTL);
> + at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_RE | AT91_EMAC_TE);
> }
>
> /*
> @@ -752,8 +783,8 @@ static int at91ether_open(struct net_device *dev)
> clk_enable(lp->ether_clk); /* Re-enable Peripheral clock */
>
> /* Clear internal statistics */
> - ctl = at91_emac_read(AT91_EMAC_CTL);
> - at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_CSR);
> + ctl = at91_emac_read(lp, AT91_EMAC_CTL);
> + at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_CSR);
>
> /* Update the MAC address (incase user has changed it) */
> update_mac_address(dev);
> @@ -762,15 +793,15 @@ static int at91ether_open(struct net_device *dev)
> enable_phyirq(dev);
>
> /* Enable MAC interrupts */
> - at91_emac_write(AT91_EMAC_IER, AT91_EMAC_RCOM | AT91_EMAC_RBNA
> + at91_emac_write(lp, AT91_EMAC_IER, AT91_EMAC_RCOM | AT91_EMAC_RBNA
> | AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM
> | AT91_EMAC_ROVR | AT91_EMAC_ABT);
>
> /* Determine current link speed */
> spin_lock_irq(&lp->lock);
> - enable_mdi();
> + enable_mdi(lp);
> update_linkspeed(dev, 0);
> - disable_mdi();
> + disable_mdi(lp);
> spin_unlock_irq(&lp->lock);
>
> at91ether_start(dev);
> @@ -787,14 +818,14 @@ static int at91ether_close(struct net_device *dev)
> unsigned long ctl;
>
> /* Disable Receiver and Transmitter */
> - ctl = at91_emac_read(AT91_EMAC_CTL);
> - at91_emac_write(AT91_EMAC_CTL, ctl & ~(AT91_EMAC_TE | AT91_EMAC_RE));
> + ctl = at91_emac_read(lp, AT91_EMAC_CTL);
> + at91_emac_write(lp, AT91_EMAC_CTL, ctl & ~(AT91_EMAC_TE | AT91_EMAC_RE));
>
> /* Disable PHY interrupt */
> disable_phyirq(dev);
>
> /* Disable MAC interrupts */
> - at91_emac_write(AT91_EMAC_IDR, AT91_EMAC_RCOM | AT91_EMAC_RBNA
> + at91_emac_write(lp, AT91_EMAC_IDR, AT91_EMAC_RCOM | AT91_EMAC_RBNA
> | AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM
> | AT91_EMAC_ROVR | AT91_EMAC_ABT);
>
> @@ -812,7 +843,7 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
> {
> struct at91_private *lp = netdev_priv(dev);
>
> - if (at91_emac_read(AT91_EMAC_TSR) & AT91_EMAC_TSR_BNQ) {
> + if (at91_emac_read(lp, AT91_EMAC_TSR) & AT91_EMAC_TSR_BNQ) {
> netif_stop_queue(dev);
>
> /* Store packet information (to free when Tx completed) */
> @@ -822,9 +853,9 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
> dev->stats.tx_bytes += skb->len;
>
> /* Set address of the data in the Transmit Address register */
> - at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr);
> + at91_emac_write(lp, AT91_EMAC_TAR, lp->skb_physaddr);
> /* Set length of the packet in the Transmit Control register */
> - at91_emac_write(AT91_EMAC_TCR, skb->len);
> + at91_emac_write(lp, AT91_EMAC_TCR, skb->len);
>
> } else {
> printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n");
> @@ -841,31 +872,32 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
> */
> static struct net_device_stats *at91ether_stats(struct net_device *dev)
> {
> + struct at91_private *lp = netdev_priv(dev);
> int ale, lenerr, seqe, lcol, ecol;
>
> if (netif_running(dev)) {
> - dev->stats.rx_packets += at91_emac_read(AT91_EMAC_OK); /* Good frames received */
> - ale = at91_emac_read(AT91_EMAC_ALE);
> + dev->stats.rx_packets += at91_emac_read(lp, AT91_EMAC_OK); /* Good frames received */
> + ale = at91_emac_read(lp, AT91_EMAC_ALE);
> dev->stats.rx_frame_errors += ale; /* Alignment errors */
> - lenerr = at91_emac_read(AT91_EMAC_ELR) + at91_emac_read(AT91_EMAC_USF);
> + lenerr = at91_emac_read(lp, AT91_EMAC_ELR) + at91_emac_read(lp, AT91_EMAC_USF);
> dev->stats.rx_length_errors += lenerr; /* Excessive Length or Undersize Frame error */
> - seqe = at91_emac_read(AT91_EMAC_SEQE);
> + seqe = at91_emac_read(lp, AT91_EMAC_SEQE);
> dev->stats.rx_crc_errors += seqe; /* CRC error */
> - dev->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC); /* Receive buffer not available */
> + dev->stats.rx_fifo_errors += at91_emac_read(lp, AT91_EMAC_DRFC);/* Receive buffer not available */
> dev->stats.rx_errors += (ale + lenerr + seqe
> - + at91_emac_read(AT91_EMAC_CDE) + at91_emac_read(AT91_EMAC_RJB));
> + + at91_emac_read(lp, AT91_EMAC_CDE) + at91_emac_read(lp, AT91_EMAC_RJB));
>
> - dev->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA); /* Frames successfully transmitted */
> - dev->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE); /* Transmit FIFO underruns */
> - dev->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE); /* Carrier Sense errors */
> - dev->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
> + dev->stats.tx_packets += at91_emac_read(lp, AT91_EMAC_FRA); /* Frames successfully transmitted */
> + dev->stats.tx_fifo_errors += at91_emac_read(lp, AT91_EMAC_TUE); /* Transmit FIFO underruns */
> + dev->stats.tx_carrier_errors += at91_emac_read(lp, AT91_EMAC_CSE); /* Carrier Sense errors */
> + dev->stats.tx_heartbeat_errors += at91_emac_read(lp, AT91_EMAC_SQEE);/* Heartbeat error */
>
> - lcol = at91_emac_read(AT91_EMAC_LCOL);
> - ecol = at91_emac_read(AT91_EMAC_ECOL);
> + lcol = at91_emac_read(lp, AT91_EMAC_LCOL);
> + ecol = at91_emac_read(lp, AT91_EMAC_ECOL);
> dev->stats.tx_window_errors += lcol; /* Late collisions */
> dev->stats.tx_aborted_errors += ecol; /* 16 collisions */
>
> - dev->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol);
> + dev->stats.collisions += (at91_emac_read(lp, AT91_EMAC_SCOL) + at91_emac_read(lp, AT91_EMAC_MCOL) + lcol + ecol);
> }
> return &dev->stats;
> }
> @@ -922,7 +954,7 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
>
> /* MAC Interrupt Status register indicates what interrupts are pending.
> It is automatically cleared once read. */
> - intstatus = at91_emac_read(AT91_EMAC_ISR);
> + intstatus = at91_emac_read(lp, AT91_EMAC_ISR);
>
> if (intstatus & AT91_EMAC_RCOM) /* Receive complete */
> at91ether_rx(dev);
> @@ -942,9 +974,9 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
>
> /* Work-around for Errata #11 */
> if (intstatus & AT91_EMAC_RBNA) {
> - ctl = at91_emac_read(AT91_EMAC_CTL);
> - at91_emac_write(AT91_EMAC_CTL, ctl & ~AT91_EMAC_RE);
> - at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_RE);
> + ctl = at91_emac_read(lp, AT91_EMAC_CTL);
> + at91_emac_write(lp, AT91_EMAC_CTL, ctl & ~AT91_EMAC_RE);
> + at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_RE);
> }
>
> if (intstatus & AT91_EMAC_ROVR)
> @@ -980,189 +1012,199 @@ static const struct net_device_ops at91ether_netdev_ops = {
> };
>
> /*
> - * Initialize the ethernet interface
> + * Detect the PHY type, and its address.
> */
> -static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address,
> - struct platform_device *pdev, struct clk *ether_clk)
> +static int __init at91ether_phy_detect(struct at91_private *lp)
> +{
> + unsigned int phyid1, phyid2;
> + unsigned long phy_id;
> + unsigned short phy_address = 0;
> +
> + while (phy_address < PHY_MAX_ADDR) {
> + /* Read the PHY ID registers */
> + enable_mdi(lp);
> + read_phy(lp, phy_address, MII_PHYSID1, &phyid1);
> + read_phy(lp, phy_address, MII_PHYSID2, &phyid2);
> + disable_mdi(lp);
> +
> + phy_id = (phyid1 << 16) | (phyid2 & 0xfff0);
> + switch (phy_id) {
> + case MII_DM9161_ID: /* Davicom 9161: PHY_ID1 = 0x181, PHY_ID2 = B881 */
> + case MII_DM9161A_ID: /* Davicom 9161A: PHY_ID1 = 0x181, PHY_ID2 = B8A0 */
> + case MII_LXT971A_ID: /* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */
> + case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
> + case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
> + case MII_DP83847_ID: /* National Semiconductor DP83847: */
> + case MII_DP83848_ID: /* National Semiconductor DP83848: */
> + case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
> + case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
> + case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
> + case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
> + /* store detected values */
> + lp->phy_type = phy_id; /* Type of PHY connected */
> + lp->phy_address = phy_address; /* MDI address of PHY */
> + return 1;
> + }
> +
> + phy_address++;
> + }
> +
> + return 0; /* not detected */
> +}
> +
> +
> +/*
> + * Detect MAC & PHY and perform ethernet interface initialization
> + */
> +static int __init at91ether_probe(struct platform_device *pdev)
> {
> struct macb_platform_data *board_data = pdev->dev.platform_data;
> + struct resource *regs;
> struct net_device *dev;
> struct at91_private *lp;
> - unsigned int val;
> int res;
>
> + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!regs)
> + return -ENOENT;
> +
> dev = alloc_etherdev(sizeof(struct at91_private));
> if (!dev)
> return -ENOMEM;
>
> - dev->base_addr = AT91_VA_BASE_EMAC;
> - dev->irq = AT91RM9200_ID_EMAC;
> + lp = netdev_priv(dev);
> + lp->board_data = *board_data;
> + spin_lock_init(&lp->lock);
> +
> + dev->base_addr = regs->start; /* physical base address */
> + lp->emac_base = ioremap(regs->start, regs->end - regs->start + 1);
> + if (!lp->emac_base) {
> + res = -ENOMEM;
> + goto err_free_dev;
> + }
> +
> + /* Clock */
> + lp->ether_clk = clk_get(&pdev->dev, "ether_clk");
> + if (IS_ERR(lp->ether_clk)) {
> + res = -ENODEV;
> + goto err_ioumap;
> + }
> + clk_enable(lp->ether_clk);
>
> /* Install the interrupt handler */
> + dev->irq = platform_get_irq(pdev, 0);
> if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
> - free_netdev(dev);
> - return -EBUSY;
> + res = -EBUSY;
> + goto err_disable_clock;
> }
>
> /* Allocate memory for DMA Receive descriptors */
> - lp = netdev_priv(dev);
> lp->dlist = (struct recv_desc_bufs *) dma_alloc_coherent(NULL, sizeof(struct recv_desc_bufs), (dma_addr_t *) &lp->dlist_phys, GFP_KERNEL);
> if (lp->dlist == NULL) {
> - free_irq(dev->irq, dev);
> - free_netdev(dev);
> - return -ENOMEM;
> + res = -ENOMEM;
> + goto err_free_irq;
> }
> - lp->board_data = *board_data;
> - lp->ether_clk = ether_clk;
> - platform_set_drvdata(pdev, dev);
> -
> - spin_lock_init(&lp->lock);
>
> ether_setup(dev);
> dev->netdev_ops = &at91ether_netdev_ops;
> dev->ethtool_ops = &at91ether_ethtool_ops;
> -
> + platform_set_drvdata(pdev, dev);
> SET_NETDEV_DEV(dev, &pdev->dev);
>
> get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */
> update_mac_address(dev); /* Program ethernet address into MAC */
>
> - at91_emac_write(AT91_EMAC_CTL, 0);
> + at91_emac_write(lp, AT91_EMAC_CTL, 0);
>
> - if (lp->board_data.is_rmii)
> - at91_emac_write(AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG | AT91_EMAC_RMII);
> + if (board_data->is_rmii)
> + at91_emac_write(lp, AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG | AT91_EMAC_RMII);
> else
> - at91_emac_write(AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG);
> + at91_emac_write(lp, AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG);
>
> - /* Perform PHY-specific initialization */
> - spin_lock_irq(&lp->lock);
> - enable_mdi();
> - if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
> - read_phy(phy_address, MII_DSCR_REG, &val);
> - if ((val & (1 << 10)) == 0) /* DSCR bit 10 is 0 -- fiber mode */
> - lp->phy_media = PORT_FIBRE;
> - } else if (machine_is_csb337()) {
> - /* mix link activity status into LED2 link state */
> - write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22);
> - } else if (machine_is_ecbat91())
> - write_phy(phy_address, MII_LEDCTRL_REG, 0x156A);
> + /* Detect PHY */
> + if (!at91ether_phy_detect(lp)) {
> + printk(KERN_ERR "at91_ether: Could not detect ethernet PHY\n");
> + res = -ENODEV;
> + goto err_free_dmamem;
> + }
>
> - disable_mdi();
> - spin_unlock_irq(&lp->lock);
> + initialize_phy(lp);
>
> lp->mii.dev = dev; /* Support for ethtool */
> lp->mii.mdio_read = mdio_read;
> lp->mii.mdio_write = mdio_write;
> - lp->mii.phy_id = phy_address;
> + lp->mii.phy_id = lp->phy_address;
> lp->mii.phy_id_mask = 0x1f;
> lp->mii.reg_num_mask = 0x1f;
>
> - lp->phy_type = phy_type; /* Type of PHY connected */
> - lp->phy_address = phy_address; /* MDI address of PHY */
> -
> /* Register the network interface */
> res = register_netdev(dev);
> - if (res) {
> - free_irq(dev->irq, dev);
> - free_netdev(dev);
> - dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
> - return res;
> - }
> + if (res)
> + goto err_free_dmamem;
>
> /* Determine current link speed */
> spin_lock_irq(&lp->lock);
> - enable_mdi();
> + enable_mdi(lp);
> update_linkspeed(dev, 0);
> - disable_mdi();
> + disable_mdi(lp);
> spin_unlock_irq(&lp->lock);
> netif_carrier_off(dev); /* will be enabled in open() */
>
> /* If board has no PHY IRQ, use a timer to poll the PHY */
> - if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
> + if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
> + gpio_request(board_data->phy_irq_pin, "ethernet_phy");
> + } else {
> + /* If board has no PHY IRQ, use a timer to poll the PHY */
> init_timer(&lp->check_timer);
> lp->check_timer.data = (unsigned long)dev;
> lp->check_timer.function = at91ether_check_link;
> - } else if (lp->board_data.phy_irq_pin >= 32)
> - gpio_request(lp->board_data.phy_irq_pin, "ethernet_phy");
> + }
>
> /* Display ethernet banner */
> printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n",
> dev->name, (uint) dev->base_addr, dev->irq,
> - at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_SPD ? "100-" : "10-",
> - at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_FD ? "FullDuplex" : "HalfDuplex",
> + at91_emac_read(lp, AT91_EMAC_CFG) & AT91_EMAC_SPD ? "100-" : "10-",
> + at91_emac_read(lp, AT91_EMAC_CFG) & AT91_EMAC_FD ? "FullDuplex" : "HalfDuplex",
> dev->dev_addr);
> - if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
> + if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
> printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
> - else if (phy_type == MII_LXT971A_ID)
> + else if (lp->phy_type == MII_LXT971A_ID)
> printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name);
> - else if (phy_type == MII_RTL8201_ID)
> + else if (lp->phy_type == MII_RTL8201_ID)
> printk(KERN_INFO "%s: Realtek RTL8201(B)L PHY\n", dev->name);
> - else if (phy_type == MII_BCM5221_ID)
> + else if (lp->phy_type == MII_BCM5221_ID)
> printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name);
> - else if (phy_type == MII_DP83847_ID)
> + else if (lp->phy_type == MII_DP83847_ID)
> printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name);
> - else if (phy_type == MII_DP83848_ID)
> + else if (lp->phy_type == MII_DP83848_ID)
> printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
> - else if (phy_type == MII_AC101L_ID)
> + else if (lp->phy_type == MII_AC101L_ID)
> printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
> - else if (phy_type == MII_KS8721_ID)
> + else if (lp->phy_type == MII_KS8721_ID)
> printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
> - else if (phy_type == MII_T78Q21x3_ID)
> + else if (lp->phy_type == MII_T78Q21x3_ID)
> printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name);
> - else if (phy_type == MII_LAN83C185_ID)
> + else if (lp->phy_type == MII_LAN83C185_ID)
> printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name);
>
> - return 0;
> -}
> -
> -/*
> - * Detect MAC and PHY and perform initialization
> - */
> -static int __init at91ether_probe(struct platform_device *pdev)
> -{
> - unsigned int phyid1, phyid2;
> - int detected = -1;
> - unsigned long phy_id;
> - unsigned short phy_address = 0;
> - struct clk *ether_clk;
> -
> - ether_clk = clk_get(&pdev->dev, "ether_clk");
> - if (IS_ERR(ether_clk)) {
> - printk(KERN_ERR "at91_ether: no clock defined\n");
> - return -ENODEV;
> - }
> - clk_enable(ether_clk); /* Enable Peripheral clock */
> -
> - while ((detected != 0) && (phy_address < 32)) {
> - /* Read the PHY ID registers */
> - enable_mdi();
> - read_phy(phy_address, MII_PHYSID1, &phyid1);
> - read_phy(phy_address, MII_PHYSID2, &phyid2);
> - disable_mdi();
> -
> - phy_id = (phyid1 << 16) | (phyid2 & 0xfff0);
> - switch (phy_id) {
> - case MII_DM9161_ID: /* Davicom 9161: PHY_ID1 = 0x181, PHY_ID2 = B881 */
> - case MII_DM9161A_ID: /* Davicom 9161A: PHY_ID1 = 0x181, PHY_ID2 = B8A0 */
> - case MII_LXT971A_ID: /* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */
> - case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
> - case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
> - case MII_DP83847_ID: /* National Semiconductor DP83847: */
> - case MII_DP83848_ID: /* National Semiconductor DP83848: */
> - case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
> - case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
> - case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
> - case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
> - detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
> - break;
> - }
> + clk_disable(lp->ether_clk); /* Disable Peripheral clock */
>
> - phy_address++;
> - }
> + return 0;
>
> - clk_disable(ether_clk); /* Disable Peripheral clock */
>
> - return detected;
> +err_free_dmamem:
> + platform_set_drvdata(pdev, NULL);
> + dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
> +err_free_irq:
> + free_irq(dev->irq, dev);
> +err_disable_clock:
> + clk_disable(lp->ether_clk);
> + clk_put(lp->ether_clk);
> +err_ioumap:
> + iounmap(lp->emac_base);
> +err_free_dev:
> + free_netdev(dev);
> + return res;
> }
>
> static int __devexit at91ether_remove(struct platform_device *pdev)
> @@ -1170,8 +1212,7 @@ static int __devexit at91ether_remove(struct platform_device *pdev)
> struct net_device *dev = platform_get_drvdata(pdev);
> struct at91_private *lp = netdev_priv(dev);
>
> - if (gpio_is_valid(lp->board_data.phy_irq_pin) &&
> - lp->board_data.phy_irq_pin >= 32)
> + if (gpio_is_valid(lp->board_data.phy_irq_pin))
> gpio_free(lp->board_data.phy_irq_pin);
>
> unregister_netdev(dev);
> diff --git a/drivers/net/ethernet/cadence/at91_ether.h b/drivers/net/ethernet/cadence/at91_ether.h
> index 3725fbb0..0ef6328 100644
> --- a/drivers/net/ethernet/cadence/at91_ether.h
> +++ b/drivers/net/ethernet/cadence/at91_ether.h
> @@ -88,6 +88,7 @@ struct at91_private
> struct macb_platform_data board_data; /* board-specific
> * configuration (shared with
> * macb for common data */
> + void __iomem *emac_base; /* base register address */
> struct clk *ether_clk; /* clock */
>
> /* PHY */


--
Nicolas Ferre


\
 
 \ /
  Last update: 2012-04-24 10:41    [W:0.073 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site