lkml.org 
[lkml]   [2012]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 1/3] ARM: omap2+: set IRQCHIP_SKIP_SET_WAKE for INTC interrupts.
All interrupts can wake-from-sleep (I think) so it should be
permissible to call enable_irq_wake(). Setting this flag allows that.

It is needed because without this, an interrupt which is delivered
during late suspend will get ignored but will not cause suspend to
abort.
If enable_irq_wake() is called and succeeds, check_wakuep_irqs()
will abort the suspend if the interrupt has fired.

Signed-off-by: NeilBrown <neilb@suse.de>
---

arch/arm/mach-omap2/irq.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 65f0d257..b0790a9 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -148,6 +148,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
ct->chip.irq_ack = omap_mask_ack_irq;
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;

ct->regs.ack = INTC_CONTROL;
ct->regs.enable = INTC_MIR_CLEAR0;



\
 
 \ /
  Last update: 2012-04-25 05:13    [W:0.142 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site