lkml.org 
[lkml]   [2012]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    SubjectRe: [RFC][PATCH 8/8] PM / Sleep: Add user space interface for manipulating wakeup sources
    Date
    On Tuesday, April 24, 2012, John Stultz wrote:
    > On 04/22/2012 02:24 PM, Rafael J. Wysocki wrote:
    > > From: Rafael J. Wysocki<rjw@sisk.pl>
    > >
    > > Android allows user space to manipulate wakelocks using two
    > > sysfs file located in /sys/power/, wake_lock and wake_unlock.
    > > Writing a wakelock name and optionally a timeout to the wake_lock
    > > file causes the wakelock whose name was written to be acquired (it
    > > is created before is necessary), optionally with the given timeout.
    > > Writing the name of a wakelock to wake_unlock causes that wakelock
    > > to be released.
    > >
    > > Implement an analogous interface for user space using wakeup sources.
    > > Add the /sys/power/wake_lock and /sys/power/wake_unlock files
    > > allowing user space to create, activate and deactivate wakeup
    > > sources, such that writing a name and optionally a timeout to
    > > wake_lock causes the wakeup source of that name to be activated,
    > > optionally with the given timeout. If that wakeup source doesn't
    > > exist, it will be created and then activated. Writing a name to
    > > wake_unlock causes the wakeup source of that name, if there is one,
    > > to be deactivated. Wakeup sources created with the help of
    > > wake_lock that haven't been used for more than 5 minutes are garbage
    > > collected and destroyed. Moreover, there can be only WL_NUMBER_LIMIT
    > > wakeup sources created with the help of wake_lock present at a time.
    > >
    > > The data type used to track wakeup sources created by user space is
    > > called "struct wakelock" to indicate the origins of this feature.
    > >
    > > Signed-off-by: Rafael J. Wysocki<rjw@sisk.pl>
    > > ---
    > One small bug. In wakelock_lookup_add, you're assigning parent after
    > you assign node, so at loop exit the parent might be null.
    > This resulted in some strange cases where I'd add two wakelocks and
    > everything would be fine, but then adding the third would cause the
    > first two to get lost.
    >
    > The following patch seems to fix it.

    Thanks a lot for the fix!

    I have folded it into the $subject patch and the new version is appended.

    Thanks,
    Rafael

    ---
    From: Rafael J. Wysocki <rjw@sisk.pl>
    Subject: PM / Sleep: Add user space interface for manipulating wakeup sources, v2

    Android allows user space to manipulate wakelocks using two
    sysfs file located in /sys/power/, wake_lock and wake_unlock.
    Writing a wakelock name and optionally a timeout to the wake_lock
    file causes the wakelock whose name was written to be acquired (it
    is created before is necessary), optionally with the given timeout.
    Writing the name of a wakelock to wake_unlock causes that wakelock
    to be released.

    Implement an analogous interface for user space using wakeup sources.
    Add the /sys/power/wake_lock and /sys/power/wake_unlock files
    allowing user space to create, activate and deactivate wakeup
    sources, such that writing a name and optionally a timeout to
    wake_lock causes the wakeup source of that name to be activated,
    optionally with the given timeout. If that wakeup source doesn't
    exist, it will be created and then activated. Writing a name to
    wake_unlock causes the wakeup source of that name, if there is one,
    to be deactivated. Wakeup sources created with the help of
    wake_lock that haven't been used for more than 5 minutes are garbage
    collected and destroyed. Moreover, there can be only WL_NUMBER_LIMIT
    wakeup sources created with the help of wake_lock present at a time.

    The data type used to track wakeup sources created by user space is
    called "struct wakelock" to indicate the origins of this feature.

    This version of the patch includes an rbtree manipulation fix from John Stultz.

    Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
    Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    ---
    Documentation/ABI/testing/sysfs-power | 42 ++++++
    drivers/base/power/wakeup.c | 1
    kernel/power/Kconfig | 8 +
    kernel/power/Makefile | 1
    kernel/power/main.c | 41 ++++++
    kernel/power/power.h | 9 +
    kernel/power/wakelock.c | 217 ++++++++++++++++++++++++++++++++++
    7 files changed, 319 insertions(+)

    Index: linux/kernel/power/main.c
    ===================================================================
    --- linux.orig/kernel/power/main.c
    +++ linux/kernel/power/main.c
    @@ -431,6 +431,43 @@ static ssize_t autosleep_store(struct ko

    power_attr(autosleep);
    #endif /* CONFIG_PM_AUTOSLEEP */
    +
    +#ifdef CONFIG_PM_WAKELOCKS
    +static ssize_t wake_lock_show(struct kobject *kobj,
    + struct kobj_attribute *attr,
    + char *buf)
    +{
    + return pm_show_wakelocks(buf, true);
    +}
    +
    +static ssize_t wake_lock_store(struct kobject *kobj,
    + struct kobj_attribute *attr,
    + const char *buf, size_t n)
    +{
    + int error = pm_wake_lock(buf);
    + return error ? error : n;
    +}
    +
    +power_attr(wake_lock);
    +
    +static ssize_t wake_unlock_show(struct kobject *kobj,
    + struct kobj_attribute *attr,
    + char *buf)
    +{
    + return pm_show_wakelocks(buf, false);
    +}
    +
    +static ssize_t wake_unlock_store(struct kobject *kobj,
    + struct kobj_attribute *attr,
    + const char *buf, size_t n)
    +{
    + int error = pm_wake_unlock(buf);
    + return error ? error : n;
    +}
    +
    +power_attr(wake_unlock);
    +
    +#endif /* CONFIG_PM_WAKELOCKS */
    #endif /* CONFIG_PM_SLEEP */

    #ifdef CONFIG_PM_TRACE
    @@ -487,6 +524,10 @@ static struct attribute * g[] = {
    #ifdef CONFIG_PM_AUTOSLEEP
    &autosleep_attr.attr,
    #endif
    +#ifdef CONFIG_PM_WAKELOCKS
    + &wake_lock_attr.attr,
    + &wake_unlock_attr.attr,
    +#endif
    #ifdef CONFIG_PM_DEBUG
    &pm_test_attr.attr,
    #endif
    Index: linux/kernel/power/power.h
    ===================================================================
    --- linux.orig/kernel/power/power.h
    +++ linux/kernel/power/power.h
    @@ -282,3 +282,12 @@ static inline void pm_autosleep_unlock(v
    static inline suspend_state_t pm_autosleep_state(void) { return PM_SUSPEND_ON; }

    #endif /* !CONFIG_PM_AUTOSLEEP */
    +
    +#ifdef CONFIG_PM_WAKELOCKS
    +
    +/* kernel/power/wakelock.c */
    +extern ssize_t pm_show_wakelocks(char *buf, bool show_active);
    +extern int pm_wake_lock(const char *buf);
    +extern int pm_wake_unlock(const char *buf);
    +
    +#endif /* !CONFIG_PM_WAKELOCKS */
    Index: linux/kernel/power/Kconfig
    ===================================================================
    --- linux.orig/kernel/power/Kconfig
    +++ linux/kernel/power/Kconfig
    @@ -111,6 +111,14 @@ config PM_AUTOSLEEP
    Allow the kernel to trigger a system transition into a global sleep
    state automatically whenever there are no active wakeup sources.

    +config PM_WAKELOCKS
    + bool "User space wakeup sources interface"
    + depends on PM_SLEEP
    + default n
    + ---help---
    + Allow user space to create, activate and deactivate wakeup source
    + objects with the help of a sysfs-based interface.
    +
    config PM_RUNTIME
    bool "Run-time PM core functionality"
    depends on !IA64_HP_SIM
    Index: linux/kernel/power/wakelock.c
    ===================================================================
    --- /dev/null
    +++ linux/kernel/power/wakelock.c
    @@ -0,0 +1,217 @@
    +/*
    + * kernel/power/wakelock.c
    + *
    + * User space wakeup sources support.
    + *
    + * Copyright (C) 2012 Rafael J. Wysocki <rjw@sisk.pl>
    + *
    + * This code is based on the analogous interface allowing user space to
    + * manipulate wakelocks on Android.
    + */
    +
    +#include <linux/ctype.h>
    +#include <linux/device.h>
    +#include <linux/err.h>
    +#include <linux/hrtimer.h>
    +#include <linux/list.h>
    +#include <linux/rbtree.h>
    +#include <linux/slab.h>
    +
    +#define WL_NUMBER_LIMIT 100
    +#define WL_GC_COUNT_MAX 100
    +#define WL_GC_TIME_SEC 300
    +
    +static DEFINE_MUTEX(wakelocks_lock);
    +
    +struct wakelock {
    + char *name;
    + struct rb_node node;
    + struct wakeup_source ws;
    + struct list_head lru;
    +};
    +
    +static struct rb_root wakelocks_tree = RB_ROOT;
    +static LIST_HEAD(wakelocks_lru_list);
    +static unsigned int number_of_wakelocks;
    +static unsigned int wakelocks_gc_count;
    +
    +ssize_t pm_show_wakelocks(char *buf, bool show_active)
    +{
    + struct rb_node *node;
    + struct wakelock *wl;
    + char *str = buf;
    + char *end = buf + PAGE_SIZE;
    +
    + mutex_lock(&wakelocks_lock);
    +
    + for (node = rb_first(&wakelocks_tree); node; node = rb_next(node)) {
    + bool active;
    +
    + wl = rb_entry(node, struct wakelock, node);
    + spin_lock_irq(&wl->ws.lock);
    + active = wl->ws.active;
    + spin_unlock_irq(&wl->ws.lock);
    + if (active == show_active)
    + str += scnprintf(str, end - str, "%s ", wl->name);
    + }
    + str += scnprintf(str, end - str, "\n");
    +
    + mutex_unlock(&wakelocks_lock);
    + return (str - buf);
    +}
    +
    +static struct wakelock *wakelock_lookup_add(const char *name, size_t len,
    + bool add_if_not_found)
    +{
    + struct rb_node **node = &wakelocks_tree.rb_node;
    + struct rb_node *parent = *node;
    + struct wakelock *wl;
    +
    + while (*node) {
    + int diff;
    +
    + parent = *node;
    + wl = rb_entry(*node, struct wakelock, node);
    + diff = strncmp(name, wl->name, len);
    + if (diff == 0) {
    + if (wl->name[len])
    + diff = -1;
    + else
    + return wl;
    + }
    + if (diff < 0)
    + node = &(*node)->rb_left;
    + else
    + node = &(*node)->rb_right;
    + }
    + if (!add_if_not_found)
    + return ERR_PTR(-EINVAL);
    +
    + if (number_of_wakelocks > WL_NUMBER_LIMIT)
    + return ERR_PTR(-ENOSPC);
    +
    + /* Not found, we have to add a new one. */
    + wl = kzalloc(sizeof(*wl), GFP_KERNEL);
    + if (!wl)
    + return ERR_PTR(-ENOMEM);
    +
    + wl->name = kstrndup(name, len, GFP_KERNEL);
    + if (!wl->name) {
    + kfree(wl);
    + return ERR_PTR(-ENOMEM);
    + }
    + wl->ws.name = wl->name;
    + wakeup_source_add(&wl->ws);
    + rb_link_node(&wl->node, parent, node);
    + rb_insert_color(&wl->node, &wakelocks_tree);
    + list_add(&wl->lru, &wakelocks_lru_list);
    + number_of_wakelocks++;
    + return wl;
    +}
    +
    +int pm_wake_lock(const char *buf)
    +{
    + const char *str = buf;
    + struct wakelock *wl;
    + u64 timeout_ns = 0;
    + size_t len;
    + int ret = 0;
    +
    + while (*str && !isspace(*str))
    + str++;
    +
    + len = str - buf;
    + if (!len)
    + return -EINVAL;
    +
    + if (*str && *str != '\n') {
    + /* Find out if there's a valid timeout string appended. */
    + ret = kstrtou64(skip_spaces(str), 10, &timeout_ns);
    + if (ret)
    + return -EINVAL;
    + }
    +
    + mutex_lock(&wakelocks_lock);
    +
    + wl = wakelock_lookup_add(buf, len, true);
    + if (IS_ERR(wl)) {
    + ret = PTR_ERR(wl);
    + goto out;
    + }
    + if (timeout_ns) {
    + u64 timeout_ms = timeout_ns + NSEC_PER_MSEC - 1;
    +
    + do_div(timeout_ms, NSEC_PER_MSEC);
    + __pm_wakeup_event(&wl->ws, timeout_ms);
    + } else {
    + __pm_stay_awake(&wl->ws);
    + }
    +
    + list_move(&wl->lru, &wakelocks_lru_list);
    +
    + out:
    + mutex_unlock(&wakelocks_lock);
    + return ret;
    +}
    +
    +static void wakelocks_gc(void)
    +{
    + struct wakelock *wl, *aux;
    + ktime_t now = ktime_get();
    +
    + list_for_each_entry_safe_reverse(wl, aux, &wakelocks_lru_list, lru) {
    + u64 idle_time_ns;
    + bool active;
    +
    + spin_lock_irq(&wl->ws.lock);
    + idle_time_ns = ktime_to_ns(ktime_sub(now, wl->ws.last_time));
    + active = wl->ws.active;
    + spin_unlock_irq(&wl->ws.lock);
    +
    + if (idle_time_ns < ((u64)WL_GC_TIME_SEC * NSEC_PER_SEC))
    + break;
    +
    + if (!active) {
    + wakeup_source_remove(&wl->ws);
    + rb_erase(&wl->node, &wakelocks_tree);
    + list_del(&wl->lru);
    + kfree(wl->name);
    + kfree(wl);
    + number_of_wakelocks--;
    + }
    + }
    + wakelocks_gc_count = 0;
    +}
    +
    +int pm_wake_unlock(const char *buf)
    +{
    + struct wakelock *wl;
    + size_t len;
    + int ret = 0;
    +
    + len = strlen(buf);
    + if (!len)
    + return -EINVAL;
    +
    + if (buf[len-1] == '\n')
    + len--;
    +
    + if (!len)
    + return -EINVAL;
    +
    + mutex_lock(&wakelocks_lock);
    +
    + wl = wakelock_lookup_add(buf, len, false);
    + if (IS_ERR(wl)) {
    + ret = PTR_ERR(wl);
    + goto out;
    + }
    + __pm_relax(&wl->ws);
    + list_move(&wl->lru, &wakelocks_lru_list);
    + if (++wakelocks_gc_count > WL_GC_COUNT_MAX)
    + wakelocks_gc();
    +
    + out:
    + mutex_unlock(&wakelocks_lock);
    + return ret;
    +}
    Index: linux/kernel/power/Makefile
    ===================================================================
    --- linux.orig/kernel/power/Makefile
    +++ linux/kernel/power/Makefile
    @@ -10,5 +10,6 @@ obj-$(CONFIG_PM_TEST_SUSPEND) += suspend
    obj-$(CONFIG_HIBERNATION) += hibernate.o snapshot.o swap.o user.o \
    block_io.o
    obj-$(CONFIG_PM_AUTOSLEEP) += autosleep.o
    +obj-$(CONFIG_PM_WAKELOCKS) += wakelock.o

    obj-$(CONFIG_MAGIC_SYSRQ) += poweroff.o
    Index: linux/drivers/base/power/wakeup.c
    ===================================================================
    --- linux.orig/drivers/base/power/wakeup.c
    +++ linux/drivers/base/power/wakeup.c
    @@ -133,6 +133,7 @@ void wakeup_source_add(struct wakeup_sou
    spin_lock_init(&ws->lock);
    setup_timer(&ws->timer, pm_wakeup_timer_fn, (unsigned long)ws);
    ws->active = false;
    + ws->last_time = ktime_get();

    spin_lock_irq(&events_lock);
    list_add_rcu(&ws->entry, &wakeup_sources);
    Index: linux/Documentation/ABI/testing/sysfs-power
    ===================================================================
    --- linux.orig/Documentation/ABI/testing/sysfs-power
    +++ linux/Documentation/ABI/testing/sysfs-power
    @@ -189,3 +189,45 @@ Description:

    Reading from this file causes the last string successfully
    written to it to be displayed.
    +
    +What: /sys/power/wake_lock
    +Date: February 2012
    +Contact: Rafael J. Wysocki <rjw@sisk.pl>
    +Description:
    + The /sys/power/wake_lock file allows user space to create
    + wakeup source objects and activate them on demand (if one of
    + those wakeup sources is active, reads from the
    + /sys/power/wakeup_count file block or return false). When a
    + string without white space is written to /sys/power/wake_lock,
    + it will be assumed to represent a wakeup source name. If there
    + is a wakeup source object with that name, it will be activated
    + (unless active already). Otherwise, a new wakeup source object
    + will be registered, assigned the given name and activated.
    + If a string written to /sys/power/wake_lock contains white
    + space, the part of the string preceding the white space will be
    + regarded as a wakeup source name and handled as descrived above.
    + The other part of the string will be regarded as a timeout (in
    + nanoseconds) such that the wakeup source will be automatically
    + deactivated after it has expired. The timeout, if present, is
    + set regardless of the current state of the wakeup source object
    + in question.
    +
    + Reads from this file return a string consisting of the names of
    + wakeup sources created with the help of it that are active at
    + the moment, separated with spaces.
    +
    +
    +What: /sys/power/wake_unlock
    +Date: February 2012
    +Contact: Rafael J. Wysocki <rjw@sisk.pl>
    +Description:
    + The /sys/power/wake_unlock file allows user space to deactivate
    + wakeup sources created with the help of /sys/power/wake_lock.
    + When a string is written to /sys/power/wake_unlock, it will be
    + assumed to represent the name of a wakeup source to deactivate.
    + If a wakeup source object of that name exists and is active at
    + the moment, it will be deactivated.
    +
    + Reads from this file return a string consisting of the names of
    + wakeup sources created with the help of /sys/power/wake_lock
    + that are inactive at the moment, separated with spaces.

    \
     
     \ /
      Last update: 2012-04-24 23:29    [W:5.387 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site