lkml.org 
[lkml]   [2012]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 03/12] i2c/i2c-pxa: Remove conditional compilation of clk code
Date
From: Viresh Kumar <viresh.linux@gmail.com>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

pxa i2c also has these dummy macros defined locally. Remove them as they aren't
required anymore.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: linux-i2c@vger.kernel.org
---
drivers/i2c/busses/i2c-pxa.c | 7 -------
1 files changed, 0 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index a997c7d..1034d93 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -41,13 +41,6 @@

#include <asm/irq.h>

-#ifndef CONFIG_HAVE_CLK
-#define clk_get(dev, id) NULL
-#define clk_put(clk) do { } while (0)
-#define clk_disable(clk) do { } while (0)
-#define clk_enable(clk) do { } while (0)
-#endif
-
struct pxa_reg_layout {
u32 ibmr;
u32 idbr;
--
1.7.9


\
 
 \ /
  Last update: 2012-04-24 13:39    [W:0.125 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site