Messages in this thread Patch in this message | | | From | xiong <> | Subject | [PATCH 1/9] atl1c: remove REG_PHY_STATUS | Date | Fri, 20 Apr 2012 14:16:16 +0800 |
| |
this register is used for l1e(dev=1026) l1c/l1d/l2cb don't use it.
Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> --- drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 7 ------- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 2 -- 2 files changed, 0 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h index cc7afa1..459e141 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h @@ -293,13 +293,6 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw); #define MDIO_AP_EN 0x10000000 #define MDIO_WAIT_TIMES 10 -/* MII PHY Status Register */ -#define REG_PHY_STATUS 0x1418 -#define PHY_GENERAL_STATUS_MASK 0xFFFF -#define PHY_STATUS_RECV_ENABLE 0x0001 -#define PHY_OE_PWSP_STATUS_MASK 0x07FF -#define PHY_OE_PWSP_STATUS_SHIFT 16 -#define PHY_STATUS_LPW_STATE 0x80000000 /* BIST Control and Status Register0 (for the Packet Memory) */ #define REG_BIST0_CTRL 0x141c #define BIST0_NOW 0x1 diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index df10637..a6c3f05 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -699,11 +699,9 @@ static void atl1c_set_mac_type(struct atl1c_hw *hw) static int atl1c_setup_mac_funcs(struct atl1c_hw *hw) { - u32 phy_status_data; u32 link_ctrl_data; atl1c_set_mac_type(hw); - AT_READ_REG(hw, REG_PHY_STATUS, &phy_status_data); AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data); hw->ctrl_flags = ATL1C_INTR_MODRT_ENABLE | -- 1.7.7
| |