lkml.org 
[lkml]   [2012]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/18] led-triggers: create a trigger for CPU activity
Date
Attempting to consolidate the ARM LED code, this removes the
custom RealView LED trigger code to turn LEDs on and off in
response to CPU activity and replace it with a standard trigger.

(bryan.wu@canonical.com:
It moves arch/arm/kernel/leds.c syscore stubs into this trigger.
It also provides ledtrig_cpu trigger event stub in <linux/leds.h>.
Although it was inspired by ARM work, it can be used in other arch.)

Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>

Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Tested-by: Jochen Friedrich <jochen@scram.de>
---
drivers/leds/Kconfig | 10 ++++
drivers/leds/Makefile | 1 +
drivers/leds/ledtrig-cpu.c | 143 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/leds.h | 23 +++++++
4 files changed, 177 insertions(+)
create mode 100644 drivers/leds/ledtrig-cpu.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 5f12659..e0f93ed 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -465,6 +465,16 @@ config LEDS_TRIGGER_BACKLIGHT

If unsure, say N.

+config LEDS_TRIGGER_CPU
+ tristate "LED CPU Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by active CPUs. This shows
+ the active CPUs across an array of LEDs so you can see what
+ CPUs are active on the system at any given moment.
+
+ If unsure, say N.
+
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
depends on LEDS_TRIGGERS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 9475bbb..ea1efb2 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -56,4 +56,5 @@ obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o
obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o
obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o
obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o
+obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
diff --git a/drivers/leds/ledtrig-cpu.c b/drivers/leds/ledtrig-cpu.c
new file mode 100644
index 0000000..7eca5af
--- /dev/null
+++ b/drivers/leds/ledtrig-cpu.c
@@ -0,0 +1,143 @@
+/*
+ * ledtrig-cpu.c - LED trigger based on CPU activity
+ *
+ * This LED trigger will be registered for each possible CPU and named as
+ * cpu0, cpu1, cpu2, cpu3, etc.
+ *
+ * It can be bound to any LED just like other triggers using either a
+ * board file or via sysfs interface.
+ *
+ * An API named ledtrig_cpu is exported for any user, who want to add CPU
+ * activity indication in their code
+ *
+ * Copyright 2011 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright 2011 - 2012 Bryan Wu <bryan.wu@canonical.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/percpu.h>
+#include <linux/syscore_ops.h>
+#include <linux/rwsem.h>
+#include "leds.h"
+
+#define MAX_NAME_LEN 8
+
+static DEFINE_PER_CPU(struct led_trigger *, cpu_trig);
+static DEFINE_PER_CPU(char [MAX_NAME_LEN], trig_name);
+static DEFINE_PER_CPU(struct rw_semaphore, trig_lock);
+
+void ledtrig_cpu(enum cpu_led_event ledevt)
+{
+ struct led_trigger *trig = __get_cpu_var(cpu_trig);
+
+ if (!trig)
+ return;
+
+ /* Locate the correct CPU LED */
+ switch (ledevt) {
+ case CPU_LED_IDLE_END:
+ case CPU_LED_START:
+ /* Will turn the LED on, max brightness */
+ led_trigger_event(trig, LED_FULL);
+ break;
+
+ case CPU_LED_IDLE_START:
+ case CPU_LED_STOP:
+ case CPU_LED_HALTED:
+ /* Will turn the LED off */
+ led_trigger_event(trig, LED_OFF);
+ break;
+
+ default:
+ /* Will leave the LED as it is */
+ break;
+ }
+}
+EXPORT_SYMBOL(ledtrig_cpu);
+
+static int ledtrig_cpu_syscore_suspend(void)
+{
+ ledtrig_cpu(CPU_LED_STOP);
+ return 0;
+}
+
+static void ledtrig_cpu_syscore_resume(void)
+{
+ ledtrig_cpu(CPU_LED_START);
+}
+
+static void ledtrig_cpu_syscore_shutdown(void)
+{
+ ledtrig_cpu(CPU_LED_HALTED);
+}
+
+static struct syscore_ops ledtrig_cpu_syscore_ops = {
+ .shutdown = ledtrig_cpu_syscore_shutdown,
+ .suspend = ledtrig_cpu_syscore_suspend,
+ .resume = ledtrig_cpu_syscore_resume,
+};
+
+static int __init ledtrig_cpu_init(void)
+{
+ int cpu;
+
+ /* Supports up to 9999 cpu cores */
+ BUILD_BUG_ON(CONFIG_NR_CPUS > 9999);
+
+ /*
+ * Registering CPU led trigger for each CPU cores here
+ * ignores CPU hotplug, but after this CPU hotplug works
+ * fine with this trigger.
+ */
+ for_each_possible_cpu(cpu) {
+ struct led_trigger *trig;
+ char *name = per_cpu(trig_name, cpu);
+ struct rw_semaphore *lock = &per_cpu(trig_lock, cpu);
+
+ init_rwsem(lock);
+
+ snprintf(name, MAX_NAME_LEN, "cpu%d", cpu);
+
+ down_write(lock);
+ led_trigger_register_simple(name, &trig);
+ per_cpu(cpu_trig, cpu) = trig;
+ up_write(lock);
+ }
+
+ register_syscore_ops(&ledtrig_cpu_syscore_ops);
+
+ pr_info("ledtrig-cpu: registered to indicate activity on CPUs\n");
+
+ return 0;
+}
+module_init(ledtrig_cpu_init);
+
+static void __exit ledtrig_cpu_exit(void)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct led_trigger *trig = per_cpu(cpu_trig, cpu);
+ char *name = per_cpu(trig_name, cpu);
+
+ led_trigger_unregister_simple(trig);
+ per_cpu(cpu_trig, cpu) = NULL;
+ memset(name, 0, MAX_NAME_LEN);
+ }
+
+ unregister_syscore_ops(&ledtrig_cpu_syscore_ops);
+}
+module_exit(ledtrig_cpu_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_AUTHOR("Bryan Wu <bryan.wu@canonical.com>");
+MODULE_DESCRIPTION("CPU LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 5884def..1215b94 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -210,4 +210,27 @@ struct gpio_led_platform_data {
struct platform_device *gpio_led_register_device(
int id, const struct gpio_led_platform_data *pdata);

+enum cpu_led_event {
+ CPU_LED_IDLE_START, /* CPU enters idle */
+ CPU_LED_IDLE_END, /* CPU idle ends */
+ CPU_LED_START, /* Machine starts, especially resume */
+ CPU_LED_STOP, /* Machine stops, especially suspend */
+ CPU_LED_HALTED, /* Machine shutdown */
+};
+#if defined(CONFIG_LEDS_TRIGGER_CPU) || defined(CONFIG_LEDS_TRIGGER_CPU_MODULE)
+/**
+ * ledtrig_cpu - emit a CPU event as a trigger
+ * @evt: CPU event to be emitted
+ *
+ * Emit a CPU event on a CPU core, which will trigger a
+ * binded LED to turn on or turn off.
+ */
+extern void ledtrig_cpu(enum cpu_led_event evt);
+#else
+static inline void ledtrig_cpu(enum cpu_led_event evt)
+{
+ return;
+}
+#endif
+
#endif /* __LINUX_LEDS_H_INCLUDED */
--
1.7.9.5


\
 
 \ /
  Last update: 2012-04-17 12:57    [W:0.136 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site