lkml.org 
[lkml]   [2012]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: 3.4.0-rc1: No init found
From
Date
On Wed, 2012-04-04 at 09:45 -0700, Christian Kujau wrote:
> On Wed, 4 Apr 2012 at 18:06, Suzuki K. Poulose wrote:
> > > INFO: Uncompressed kernel (size 0x6d4b80) overlaps the address of the
> > > wrapper(0x400000)
> > > INFO: Fixing the link_address of wrapper to (0x700000)
> > > Building modules, stage 2.
> > > MODPOST 24 modules
> > > ------------
> > >
> > > I started to see these messages in January (around Linux 3.2.0), but never
> > > investigated what it was since the produced kernels continued to boot just
> > > fine.
> >
> > The above change was added by me. The message is printed when the 'wrapper'
> > script finds that decompressed kernel overlaps the 'bootstrap code' which does
> > the decompression. So it shifts the 'address' of the bootstrap code to the
> > next higher MB. As such it is harmless.
>
> OK, good to know that it's harmless. Thanks for the explanation.

I think I found it :-)

can you test the patch below ?

From 08f1ec8a594c60bf3856e3c45b6d15fd691d90bb Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 10 Apr 2012 17:21:35 +1000
Subject: [PATCH] powerpc: Fix page fault with lockdep regression

commit a546498f3bf9aac311c66f965186373aee2ca0b0
introduced a regression on 32-bit when irq tracing
is enabled by exposing an old bug in our irq tracing
code for exception entry.

The code would save and restore some GPRs around the
calls to the C lockdep code, however, it tries to be
too smart for its own good and restores some of the
GPRs from the exception frame (as saved there on
exception entry).

However, for page faults, we do replace those GPRs with
arguments to do_page_fault before we call transfer_to_handler
and so restoring from the exception frame is plain wrong in
this case.

This was fine as long as we didn't touch the interrupt state
when taking page fault, but when I started doing it, it would
trigger the lockdep calls and the bug.

This fixes it by cleaning up that code a bit. It did create
a small stack frame for the sake of backtraces, so let's
make it a bit bigger and use it to save and restore the
stuff we care about.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
arch/powerpc/kernel/entry_32.S | 39 +++++++++++++++++++++------------------
1 file changed, 21 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 3e57a00..ba3aeb4 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -206,40 +206,43 @@ reenable_mmu: /* re-enable mmu so we can */
andi. r10,r10,MSR_EE /* Did EE change? */
beq 1f

- /* Save handler and return address into the 2 unused words
- * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
- * else can be recovered from the pt_regs except r3 which for
- * normal interrupts has been set to pt_regs and for syscalls
- * is an argument, so we temporarily use ORIG_GPR3 to save it
- */
- stw r9,8(r1)
- stw r11,12(r1)
- stw r3,ORIG_GPR3(r1)
/*
* The trace_hardirqs_off will use CALLER_ADDR0 and CALLER_ADDR1.
* If from user mode there is only one stack frame on the stack, and
* accessing CALLER_ADDR1 will cause oops. So we need create a dummy
* stack frame to make trace_hardirqs_off happy.
+ *
+ * This is handy because we also need to save a bunch of GPRs,
+ * r3 can be different from GPR3(r1) at this point, r9 and r11
+ * contains the old MSR and handler address respectively,
+ * r4 & r5 can contain page fault arguments that need to be passed
+ * along as well. r12, CCR, CTR, XER etc... are left clobbered as
+ * they aren't useful past this point (aren't syscall arguments),
+ * the rest is restored from the exception frame.
*/
+ stwu r1,-32(r1)
+ stw r9,8(r1)
+ stw r11,12(r1)
+ stw r3,16(r1)
+ stw r4,20(r1)
+ stw r5,24(r1)
andi. r12,r12,MSR_PR
- beq 11f
- stwu r1,-16(r1)
+ b 11f
bl trace_hardirqs_off
- addi r1,r1,16
b 12f
-
11:
bl trace_hardirqs_off
12:
+ lwz r5,24(r1)
+ lwz r4,20(r1)
+ lwz r3,16(r1)
+ lwz r11,12(r1)
+ lwz r9,8(r1)
+ addi r1,r1,32
lwz r0,GPR0(r1)
- lwz r3,ORIG_GPR3(r1)
- lwz r4,GPR4(r1)
- lwz r5,GPR5(r1)
lwz r6,GPR6(r1)
lwz r7,GPR7(r1)
lwz r8,GPR8(r1)
- lwz r9,8(r1)
- lwz r11,12(r1)
1: mtctr r11
mtlr r9
bctr /* jump to handler */
--
1.7.9.5




\
 
 \ /
  Last update: 2012-04-10 09:27    [W:0.076 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site