lkml.org 
[lkml]   [2012]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] can: Remove redundant spi driver bus initialization
Date
In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register() so
we can drop the manual assignment.

The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
.driver = {
- .bus = &spi_bus_type,
},
};
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-can@vger.kernel.org
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/mcp251x.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index 346785c..2bccaf7 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -1184,7 +1184,6 @@ MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
static struct spi_driver mcp251x_can_driver = {
.driver = {
.name = DEVICE_NAME,
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},

--
1.7.9.5


\
 
 \ /
  Last update: 2012-04-10 22:51    [W:0.372 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site