Messages in this thread | | | Date | Tue, 10 Apr 2012 20:56:19 +0200 | From | Jens Axboe <> | Subject | Re: [RFC PATCH] block: Change default IO scheduler to deadline except SATA |
| |
On 2012-04-10 20:53, Vivek Goyal wrote: > On Tue, Apr 10, 2012 at 08:41:08PM +0200, Jens Axboe wrote: > > [..] >>> So we are back to the question of can scsi devices find out if a Lun >>> is backed by single disk or multiple disks. >> >> The cleanest would be to have the driver signal these attributes at >> probe time. You could even adjust CFQ properties based on this, driving >> the queue depth harder etc. Realistically, going forward, most fast >> flash devices will be driven by a noop-like scheduler on multiqueue. So >> CPU cost of the IO scheduler can mostly be ignored, since CFQ cost on >> even big RAIDs isn't an issue due to the low IOPS rates. > > Agreed that on RAID CPU cost is not a problem. Just that idling and low > queue depth kills the performance.
Exactly, and both of these are trivially adjustable as long as we know when to do it.
> So apart from "rotational" if driver can give some hints about underlying > devices being RAID (or multi device), it will help. Just that it looks > like scsi does not have a way to determine that.
This sort of thing should be done with a udev rule. It should not be too hard to match for the most popular arrays, catching the majority of the setups by default. Or you could ask the SCSI folks for some heuristics, it's not unlikely that a few different attributes could make that bullet proof, pretty much.
-- Jens Axboe
| |