lkml.org 
[lkml]   [2012]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ACPI: evaluate _PS3 when entering D3 Cold
On Sun, Apr 01, 2012 at 02:28:57PM +0800, Lin Ming wrote:
> >
> > There is no D3 hot support for this device(from the firmware's
> > perspective), either it is at D0(via _PS0), or it will be at D3 cold(via
> > _PS3).
>
> But this is the generic code. We can't only consider some special
> device.
Agree.

The code change I've made only affects D3 cold path, existing code path
to set device power state to D0-D3hot is not affected.

And for D3 cold path, I don't think evaluating _PS3 should do any harm
to the device, isn't it the case?

>
> Maybe we need some flag to tell which D3 state _PS3 is used for.
Do you mean the ACPI spec needs to be updated to reflect which D3
state the device will be at once its _PS3 is evaluated?

-Aaron



\
 
 \ /
  Last update: 2012-04-01 08:45    [W:2.085 / U:0.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site