lkml.org 
[lkml]   [2012]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] iwlegacy: Kconfig: Move Debugging Options
Date
Move the debug options so they appear below the 3945 / 4965 options.

Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
---
drivers/net/wireless/iwlegacy/Kconfig | 78 ++++++++++++++++----------------
1 files changed, 39 insertions(+), 39 deletions(-)

diff --git a/drivers/net/wireless/iwlegacy/Kconfig b/drivers/net/wireless/iwlegacy/Kconfig
index 05bd375..4d81b80 100644
--- a/drivers/net/wireless/iwlegacy/Kconfig
+++ b/drivers/net/wireless/iwlegacy/Kconfig
@@ -6,45 +6,6 @@ config IWLEGACY
select LEDS_TRIGGERS
select MAC80211_LEDS

-menu "Debugging Options"
- depends on IWLEGACY
-
-config IWLEGACY_DEBUG
- bool "Enable full debugging output in iwlegacy (iwl 3945/4965) drivers"
- depends on IWLEGACY
- ---help---
- This option will enable debug tracing output for the iwlegacy
- drivers.
-
- This will result in the kernel module being ~100k larger. You can
- control which debug output is sent to the kernel log by setting the
- value in
-
- /sys/class/net/wlan0/device/debug_level
-
- This entry will only exist if this option is enabled.
-
- To set a value, simply echo an 8-byte hex value to the same file:
-
- % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
-
- You can find the list of debug mask values in:
- drivers/net/wireless/iwlegacy/common.h
-
- If this is your first time using this driver, you should say Y here
- as the debug information can assist others in helping you resolve
- any problems you may encounter.
-
-config IWLEGACY_DEBUGFS
- bool "iwlegacy (iwl 3945/4965) debugfs support"
- depends on IWLEGACY && MAC80211_DEBUGFS
- ---help---
- Enable creation of debugfs files for the iwlegacy drivers. This
- is a low-impact option that allows getting insight into the
- driver's state at runtime.
-
-endmenu
-
config IWL4965
tristate "Intel Wireless WiFi 4965AGN (iwl4965)"
depends on PCI && MAC80211
@@ -98,3 +59,42 @@ config IWL3945
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl3945.
+
+menu "Debugging Options"
+ depends on IWLEGACY
+
+config IWLEGACY_DEBUG
+ bool "Enable full debugging output in iwlegacy (iwl 3945/4965) drivers"
+ depends on IWLEGACY
+ ---help---
+ This option will enable debug tracing output for the iwlegacy
+ drivers.
+
+ This will result in the kernel module being ~100k larger. You can
+ control which debug output is sent to the kernel log by setting the
+ value in
+
+ /sys/class/net/wlan0/device/debug_level
+
+ This entry will only exist if this option is enabled.
+
+ To set a value, simply echo an 8-byte hex value to the same file:
+
+ % echo 0x43fff > /sys/class/net/wlan0/device/debug_level
+
+ You can find the list of debug mask values in:
+ drivers/net/wireless/iwlegacy/common.h
+
+ If this is your first time using this driver, you should say Y here
+ as the debug information can assist others in helping you resolve
+ any problems you may encounter.
+
+config IWLEGACY_DEBUGFS
+ bool "iwlegacy (iwl 3945/4965) debugfs support"
+ depends on IWLEGACY && MAC80211_DEBUGFS
+ ---help---
+ Enable creation of debugfs files for the iwlegacy drivers. This
+ is a low-impact option that allows getting insight into the
+ driver's state at runtime.
+
+endmenu
--
1.7.6.4


\
 
 \ /
  Last update: 2012-02-27 19:39    [W:1.164 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site