lkml.org 
[lkml]   [2012]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/13] firewire-sbp-target: Add sbp_proto.{c,h}
Date
These are functions to generate TransportID identifiers as per SPC-4
revision 17.

Signed-off-by: Chris Boot <bootc@bootc.net>
Cc: Andy Grover <agrover@redhat.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
drivers/target/sbp/sbp_proto.c | 113 ++++++++++++++++++++++++++++++++++++++++
drivers/target/sbp/sbp_proto.h | 12 ++++
2 files changed, 125 insertions(+), 0 deletions(-)
create mode 100644 drivers/target/sbp/sbp_proto.c
create mode 100644 drivers/target/sbp/sbp_proto.h

diff --git a/drivers/target/sbp/sbp_proto.c b/drivers/target/sbp/sbp_proto.c
new file mode 100644
index 0000000..5744b5c
--- /dev/null
+++ b/drivers/target/sbp/sbp_proto.c
@@ -0,0 +1,113 @@
+/*
+ * SBP2 target driver (SCSI over IEEE1394 in target mode)
+ *
+ * Copyright (C) 2011 Chris Boot <bootc@bootc.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#define KMSG_COMPONENT "sbp_target"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <scsi/scsi.h>
+#include <target/target_core_base.h>
+
+#include "sbp_proto.h"
+
+/*
+ * Handlers for Serial Attached SCSI (SBP)
+ */
+u8 sbp_get_fabric_proto_ident(struct se_portal_group *se_tpg)
+{
+ /*
+ * Return a IEEE 1394 SCSI Protocol identifier for loopback operations
+ * This is defined in section 7.5.1 Table 362 in spc4r17
+ */
+ return SCSI_PROTOCOL_SBP;
+}
+EXPORT_SYMBOL(sbp_get_fabric_proto_ident);
+
+u32 sbp_get_pr_transport_id(
+ struct se_portal_group *se_tpg,
+ struct se_node_acl *se_nacl,
+ struct t10_pr_registration *pr_reg,
+ int *format_code,
+ unsigned char *buf)
+{
+ int ret;
+
+ /*
+ * Set PROTOCOL IDENTIFIER to 3h for SBP
+ */
+ buf[0] = SCSI_PROTOCOL_SBP;
+ /*
+ * From spc4r17, 7.5.4.4 TransportID for initiator ports using SCSI
+ * over IEEE 1394
+ */
+ ret = hex2bin(&buf[8], se_nacl->initiatorname, 8);
+ if (ret < 0)
+ pr_debug("sbp transport_id: invalid hex string\n");
+
+ /*
+ * The IEEE 1394 Transport ID is a hardcoded 24-byte length
+ */
+ return 24;
+}
+EXPORT_SYMBOL(sbp_get_pr_transport_id);
+
+u32 sbp_get_pr_transport_id_len(
+ struct se_portal_group *se_tpg,
+ struct se_node_acl *se_nacl,
+ struct t10_pr_registration *pr_reg,
+ int *format_code)
+{
+ *format_code = 0;
+ /*
+ * From spc4r17, 7.5.4.4 TransportID for initiator ports using SCSI
+ * over IEEE 1394
+ *
+ * The SBP Transport ID is a hardcoded 24-byte length
+ */
+ return 24;
+}
+EXPORT_SYMBOL(sbp_get_pr_transport_id_len);
+
+/*
+ * Used for handling SCSI fabric dependent TransportIDs in SPC-3 and above
+ * Persistent Reservation SPEC_I_PT=1 and PROUT REGISTER_AND_MOVE operations.
+ */
+char *sbp_parse_pr_out_transport_id(
+ struct se_portal_group *se_tpg,
+ const char *buf,
+ u32 *out_tid_len,
+ char **port_nexus_ptr)
+{
+ /*
+ * Assume the FORMAT CODE 00b from spc4r17, 7.5.4.4 TransportID
+ * for initiator ports using SCSI over SBP Serial SCSI Protocol
+ *
+ * The TransportID for a IEEE 1394 Initiator Port is of fixed size of
+ * 24 bytes, and IEEE 1394 does not contain a I_T nexus identifier,
+ * so we return the **port_nexus_ptr set to NULL.
+ */
+ *port_nexus_ptr = NULL;
+ *out_tid_len = 24;
+
+ return (char *)&buf[8];
+}
+EXPORT_SYMBOL(sbp_parse_pr_out_transport_id);
+
diff --git a/drivers/target/sbp/sbp_proto.h b/drivers/target/sbp/sbp_proto.h
new file mode 100644
index 0000000..1bd3e16
--- /dev/null
+++ b/drivers/target/sbp/sbp_proto.h
@@ -0,0 +1,12 @@
+
+u8 sbp_get_fabric_proto_ident(struct se_portal_group *se_tpg);
+u32 sbp_get_pr_transport_id(struct se_portal_group *se_tpg,
+ struct se_node_acl *se_nacl, struct t10_pr_registration *pr_reg,
+ int *format_code, unsigned char *buf);
+u32 sbp_get_pr_transport_id_len(
+ struct se_portal_group *se_tpg, struct se_node_acl *se_nacl,
+ struct t10_pr_registration *pr_reg, int *format_code);
+char *sbp_parse_pr_out_transport_id(
+ struct se_portal_group *se_tpg, const char *buf,
+ u32 *out_tid_len, char **port_nexus_ptr);
+
--
1.7.9


\
 
 \ /
  Last update: 2012-02-11 20:49    [W:0.277 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site