lkml.org 
[lkml]   [2012]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] gpio: pcf857x: use client->irq for gpio_to_irq()
On Thu, Dec 06, 2012 at 01:10:28AM -0800, Kuninori Morimoto wrote:
> 6e20a0a429bd4dc07d6de16d9c247270e04e4aa0
> (gpio: pcf857x: enable gpio_to_irq() support)
> added gpio_to_irq() support on pcf857x driver,
> but it used pdata->irq.
> This patch modifies driver to use client->irq instead of it.
> It modifies kzm9g board platform settings,
> and device probe information too.
> This patch is tested on kzm9g board
>
> Reported-by: ENGELMAYER Christian Christian.Engelmayer@frequentis.com
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> >> Simon
>
> This patch modify kzm9g board settings.
> Please give your acked-by on this patch

Thanks Morimoto-san,

This seems reasonable to me and a quick boot check doesn't show up
any breakage.

Acked-by: Simon Horman <horms+renesas@verge.net.au>

>
> arch/arm/mach-shmobile/board-kzm9g.c | 2 +-
> drivers/gpio/gpio-pcf857x.c | 29 +++++++++++------------------
> include/linux/i2c/pcf857x.h | 3 ---
> 3 files changed, 12 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
> index f63f2ee..c02448d 100644
> --- a/arch/arm/mach-shmobile/board-kzm9g.c
> +++ b/arch/arm/mach-shmobile/board-kzm9g.c
> @@ -552,7 +552,6 @@ static struct platform_device fsi_ak4648_device = {
> /* I2C */
> static struct pcf857x_platform_data pcf8575_pdata = {
> .gpio_base = GPIO_PCF8575_BASE,
> - .irq = intcs_evt2irq(0x3260), /* IRQ19 */
> };
>
> static struct i2c_board_info i2c0_devices[] = {
> @@ -582,6 +581,7 @@ static struct i2c_board_info i2c1_devices[] = {
> static struct i2c_board_info i2c3_devices[] = {
> {
> I2C_BOARD_INFO("pcf8575", 0x20),
> + .irq = intcs_evt2irq(0x3260), /* IRQ19 */
> .platform_data = &pcf8575_pdata,
> },
> };
> diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
> index 16af35c..a19b745 100644
> --- a/drivers/gpio/gpio-pcf857x.c
> +++ b/drivers/gpio/gpio-pcf857x.c
> @@ -223,11 +223,11 @@ static void pcf857x_irq_domain_cleanup(struct pcf857x *gpio)
>
> static int pcf857x_irq_domain_init(struct pcf857x *gpio,
> struct pcf857x_platform_data *pdata,
> - struct device *dev)
> + struct i2c_client *client)
> {
> int status;
>
> - gpio->irq_domain = irq_domain_add_linear(dev->of_node,
> + gpio->irq_domain = irq_domain_add_linear(client->dev.of_node,
> gpio->chip.ngpio,
> &pcf857x_irq_domain_ops,
> NULL);
> @@ -235,15 +235,15 @@ static int pcf857x_irq_domain_init(struct pcf857x *gpio,
> goto fail;
>
> /* enable real irq */
> - status = request_irq(pdata->irq, pcf857x_irq_demux, 0,
> - dev_name(dev), gpio);
> + status = request_irq(client->irq, pcf857x_irq_demux, 0,
> + dev_name(&client->dev), gpio);
> if (status)
> goto fail;
>
> /* enable gpio_to_irq() */
> INIT_WORK(&gpio->work, pcf857x_irq_demux_work);
> gpio->chip.to_irq = pcf857x_to_irq;
> - gpio->irq = pdata->irq;
> + gpio->irq = client->irq;
>
> return 0;
>
> @@ -285,8 +285,8 @@ static int pcf857x_probe(struct i2c_client *client,
> gpio->chip.ngpio = id->driver_data;
>
> /* enable gpio_to_irq() if platform has settings */
> - if (pdata && pdata->irq) {
> - status = pcf857x_irq_domain_init(gpio, pdata, &client->dev);
> + if (pdata && client->irq) {
> + status = pcf857x_irq_domain_init(gpio, pdata, client);
> if (status < 0) {
> dev_err(&client->dev, "irq_domain init failed\n");
> goto fail;
> @@ -368,15 +368,6 @@ static int pcf857x_probe(struct i2c_client *client,
> if (status < 0)
> goto fail;
>
> - /* NOTE: these chips can issue "some pin-changed" IRQs, which we
> - * don't yet even try to use. Among other issues, the relevant
> - * genirq state isn't available to modular drivers; and most irq
> - * methods can't be called from sleeping contexts.
> - */
> -
> - dev_info(&client->dev, "%s\n",
> - client->irq ? " (irq ignored)" : "");
> -
> /* Let platform code set up the GPIOs and their users.
> * Now is the first time anyone could use them.
> */
> @@ -388,13 +379,15 @@ static int pcf857x_probe(struct i2c_client *client,
> dev_warn(&client->dev, "setup --> %d\n", status);
> }
>
> + dev_info(&client->dev, "probed\n");
> +
> return 0;
>
> fail:
> dev_dbg(&client->dev, "probe error %d for '%s'\n",
> status, client->name);
>
> - if (pdata && pdata->irq)
> + if (pdata && client->irq)
> pcf857x_irq_domain_cleanup(gpio);
>
> kfree(gpio);
> @@ -418,7 +411,7 @@ static int pcf857x_remove(struct i2c_client *client)
> }
> }
>
> - if (pdata && pdata->irq)
> + if (pdata && client->irq)
> pcf857x_irq_domain_cleanup(gpio);
>
> status = gpiochip_remove(&gpio->chip);
> diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h
> index 781e6bd..0767a2a 100644
> --- a/include/linux/i2c/pcf857x.h
> +++ b/include/linux/i2c/pcf857x.h
> @@ -10,7 +10,6 @@
> * @setup: optional callback issued once the GPIOs are valid
> * @teardown: optional callback issued before the GPIOs are invalidated
> * @context: optional parameter passed to setup() and teardown()
> - * @irq: optional interrupt number
> *
> * In addition to the I2C_BOARD_INFO() state appropriate to each chip,
> * the i2c_board_info used with the pcf875x driver must provide its
> @@ -40,8 +39,6 @@ struct pcf857x_platform_data {
> int gpio, unsigned ngpio,
> void *context);
> void *context;
> -
> - int irq;
> };
>
> #endif /* __LINUX_PCF857X_H */
> --
> 1.7.9.5
>


\
 
 \ /
  Last update: 2012-12-07 02:01    [W:0.106 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site