lkml.org 
[lkml]   [2012]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/2] New driver: Xillybus generic interface for FPGA (programmable logic)
Date
On Tuesday 04 December 2012, Eli Billauer wrote:
> On 12/04/2012 10:43 PM, Arnd Bergmann wrote:
> > On Tuesday 04 December 2012, Eli Billauer wrote:
> > It's also a bit confusing because it doesn't appear
> > to be a "bus" in the Linux sense of being something that provides
> > an abstract interface between hardware and kernel device drivers.
> >
> > Instead, you just have a user interface for those FPGA models that
> > don't need a kernel level driver themselves.
>
> I'm not sure I would agree on that. Xillybus consists of an IP core
> (sort-of library function for an FPGA), and a driver. At the OS level,
> it's no different than any PCI card and its driver. I call it "generic"
> because it's not tailored to transport a certain kind of data (say,
> audio samples or video frames).
>
> In the FPGA world, passing data to or from a processor is a project in
> itself, in particular if the latter runs a fullblown operating system.
> What Xillybus does, is supplying a simple interface on both sides: A
> hardware FIFO on the logic side for the FPGA designer to interface with,
> and a plain device file on the host's side. The whole point of this
> project is to make everything simple and intuitive.

The problem with this approach is that it cannot be used to
provide standard OS interfaces: when you have an audio/video device
implemented in an FPGA, all Linux applications expect to use the
alsa and v4l interfaces, not xillybus, which means you need a
kernel-level driver. For special-purpose applications, having
a generic kernel-level driver and a custom user application works
fine, but you don't save any complexity for a lot of other use
cases, you just move it somewhere else by requiring a redesign
of existing user applications, which is often not a reasonable
approach.

> > This is something
> > that sits on a somewhat higher level -- if we want a generic FPGA
> > interface, this would not be directly connected to a PCI or AMBA
> > bus, but instead connect to an FPGA bus that still needs to be
> > invented.
> >
> For what it's worth, the driver is now divided into three parts: A
> xillybus_core, a module for PCIe and a module for Open Firmware
> interface. The two latter depend on the first, of course.

Ok, that is certainly a good step in the right direction.

> > In the user interface side that you provide seems to be on the
> > same interface level as the USB passthrough interface implemented
> > in drivers/usb/core/devio.c, which has a complex set of ioctls
> > but does serve a very similar purpose. Greg may want to comment
> > on whether that is actually a good interface or not, since I assume
> > he has some experience with how well it worked for USB.
> >
> > My feeling for now is that we actually need both an in-kernel
> > interface and a user interface, with the complication that the
> > hardware should not care which of the two is used for a particular
> > instance.
>
> I'm not sure what you meant here, but I'll mention this: FPGA designers
> using the IP core don't need to care what the transport is, PCIe, AMBA
> or anything else. They just see a FIFO. Neither is the host influenced
> by this, except for loading a different front end module.

I mean some IP cores can use your driver just fine, while other IP
cores require a driver that interfaces with a kernel subsystem
(alsa, v4l, network, iio, etc). Whether xillybus is a good design
choice for those IP cores is a different question, but for all
I can tell, it would be entirely possible to implement an
ethernet adapter based on this, as long as it can interface to
the kernel.

> > For the user interface, something that is purely read/write
> > based is really nice, though I wonder if using debugfs or sysfs
> > for this would be more appropriate than having lots of character
> > devices for a single piece of hardware.
> >
> And this is where the term "hardware" becomes elusive with an FPGA: One
> could look at the entire FPGA chip as a single piece of hardware, and
> expect everything to be packed into a few device nodes.
>
> Or, one could look at each of the hardware FIFOs in the FPGA as
> something like a sound card, an independent piece of hardware, which is
> the way I chose to look at it. That's why I allocated a character device
> for each.

Most interfaces we have in the kernel are on a larger scale. E.g. a network
adapter is a single instance rather than an input and an output queue.

> Since the project has been in use by others for about a year (academic
> users and in the industry), I know at this point that the user interface
> is convenient to work with (judging from feedback I received). So I
> would be quite reluctant to make radical changes in the user interface,
> in particular knowing that it works well and makes UNIX guys feel at home.

Changing to sysfs or debugfs is not a radical change: you would still have
multiple nodes in a file system that each represent a queue, but rather
than using a flat name space under /dev, they would be hierarchical with
a directory per physical device (e.g. one FPGA).

Arnd


\
 
 \ /
  Last update: 2012-12-05 00:41    [W:1.478 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site