lkml.org 
[lkml]   [2012]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ata1: COMRESET failed
On Mon, Dec 03, 2012 at 12:16:44PM +0100, Jiri Slaby wrote:
> On 10/26/2012 01:56 PM, Jiri Slaby wrote:
> > Hello,
> >
> > at every boot I'm seeing:
> >
> > At 5th second:
> > ata1: link is slow to respond, please be patient (ready=0)
> >
> > At 10th second:
> > ata1: COMRESET failed (errno=-16)
> > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
> > ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
> > ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > ata1.00: configured for UDMA/133
> > scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
> >
> >
> > So that I have to wait 5 s for the disk to come up. I tried 3.4.15 and
> > 3.6.3, both with the same result.
> >
> > 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset
> > Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
> >
> > Any ideas what is going on?
>
> Anybody? I also tried 3.0, it's there too. And libahci.skip_host_reset=1
> works around the issue.

FWIW, I had the same issue on an AMD chipset at the old job. It needs to
reset SATA link for some reason, probably BIOS programs it wrongly...

+ Alan.

--
Regards/Gruss,
Boris.


\
 
 \ /
  Last update: 2012-12-03 13:41    [W:0.077 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site