lkml.org 
[lkml]   [2012]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCHv4 0/8] Support for Tegra 2D hardware
Hi Terje,

Here is the second part comments. I admit I still haven't finished
reading the codes... really too many codes. :)
Anyway I'll keep doing this when I have free slots.

diff --git a/drivers/gpu/drm/tegra/gr2d.c b/drivers/gpu/drm/tegra/gr2d.c
index a936902..c3ded60 100644
--- a/drivers/gpu/drm/tegra/gr2d.c
+++ b/drivers/gpu/drm/tegra/gr2d.c
@@ -131,6 +131,14 @@ static int gr2d_submit(struct tegra_drm_context
*context,
if (err)
goto fail;

+ /* We define CMA as an temporary solution in host1x driver.
+ That's also why we have a CMA kernel config in it.
+ But seems here, in tegradrm, we hardcode the CMA here.
+ So what do you do when host1x change to IOMMU?
+ Do we also need to define a CMA config in tegradrm
driver,
+ then after host1x changes to IOMMU, we add another IOMMU
+ config in tegradrm? Or we should invent another more
+ generic wrapper layer here? */
cmdbuf.mem = handle_cma_to_host1x(drm, file_priv,
cmdbuf.mem);
if (!cmdbuf.mem)
goto fail;
diff --git a/drivers/gpu/host1x/job.c b/drivers/gpu/host1x/job.c
index cc8ca2f..0867b72 100644
--- a/drivers/gpu/host1x/job.c
+++ b/drivers/gpu/host1x/job.c
@@ -82,6 +82,26 @@ struct host1x_job *host1x_job_alloc(struct
host1x_channel *ch,
mem += num_unpins * sizeof(dma_addr_t);
job->pin_ids = num_unpins ? mem : NULL;

+ /* I think this is a somewhat ugly design.
+ Actually "addr_phys" is consisted by "reloc_addr_phys" and
+ "gather_addr_phys".
+ Why don't we just declare "reloc_addr_phys" and
"gather_addr_phys"?
+ In current design, let's say if one nvhost newbie changes the
order
+ of these 2 blocks of code in function "pin_job_mem":
+
+ for (i = 0; i < job->num_relocs; i++) {
+ struct host1x_reloc *reloc = &job->relocarray[i];
+ job->pin_ids[count] = reloc->target;
+ count++;
+ }
+
+ for (i = 0; i < job->num_gathers; i++) {
+ struct host1x_job_gather *g = &job->gathers[i];
+ job->pin_ids[count] = g->mem_id;
+ count++;
+ }
+
+ Then likely something weird occurs... */
job->reloc_addr_phys = job->addr_phys;
job->gather_addr_phys = &job->addr_phys[num_relocs];

@@ -252,6 +272,10 @@ static int do_relocs(struct host1x_job *job,
}
}

+ /* I have question here. Does this mean the address info
+ which need to be relocated(according to the libdrm codes,
+ seems this address is "0xDEADBEEF") always staying at the
+ beginning of a page? */
__raw_writel(
(job->reloc_addr_phys[i] +
reloc->target_offset) >> reloc->shift,
@@ -565,6 +589,7 @@ int host1x_job_pin(struct host1x_job *job, struct
platform_device *pdev)
}
}

+ /* if (host1x_firewall && !err) { */
if (host1x_firewall) {
err = copy_gathers(job, pdev);
if (err) {
@@ -573,6 +598,9 @@ int host1x_job_pin(struct host1x_job *job, struct
platform_device *pdev)
}
}

+/* Rename this label to "out" or something else.
+ Because if everything goes right, the codes under this label also
+ get executed. */
fail:
wmb();

diff --git a/drivers/gpu/host1x/memmgr.c b/drivers/gpu/host1x/memmgr.c
index f3954f7..bb5763d 100644
--- a/drivers/gpu/host1x/memmgr.c
+++ b/drivers/gpu/host1x/memmgr.c
@@ -156,6 +156,9 @@ int host1x_memmgr_pin_array_ids(struct
platform_device *dev,
count, &unpin_data[pin_count],
phys_addr);

+ /* I don't think the current "host1x_cma_pin_array_ids"
+ is able to return a negative value. So this "if" doesn't
+ make sense...*/
if (cma_count < 0) {
/* clean up previous handles */
while (pin_count) {
Mark
On 12/21/2012 07:39 PM, Terje Bergstrom wrote:
> This set of patches adds support for Tegra20 and Tegra30 host1x and
> 2D. It is based on linux-next-20121220.
>
> The fourth version has only few changes compared to previous version:
> * Fixed some sparse warnings
> * Fixed host1x Makefile to allow building as module
> * Fixed host1x module unload
> * Fixed tegradrm unload sequence
> * host1x creates DRM dummy device and tegradrm uses it for storing
> DRM related data.
>
> Some of the issues left open:
> * Register definitions still use static inline. There has been a
> debate about code style versus ability to use compiler type
> checking and code coverage analysis. There was no conclusion, so
> I left it as was.
> * Uses still CMA helpers. IOMMU support will replace CMA with host1x
> specific allocator.
>
> host1x is the driver that controls host1x hardware. It supports
> host1x command channels, synchronization, and memory management. It
> is sectioned into logical driver under drivers/gpu/host1x and
> physical driver under drivers/host1x/hw. The physical driver is
> compiled with the hardware headers of the particular host1x version.
>
> The hardware units are described (briefly) in the Tegra2 TRM. Wiki
> page https://gitorious.org/linux-tegra-drm/pages/Host1xIntroduction
> also contains a short description of the functionality.
>
> The patch set removes responsibility of host1x from tegradrm. At the
> same time, it moves all drm related infrastructure in
> drivers/gpu/drm/tegra/host1x.c to drm.c. To replace the host1x
> central device, host1x creates a dummy device for tegradrm to hang
> global data to. This is a break in responsibility split of tegradrm
> taking care of DRM and host1x driver taking care of host1x and
> clients, but this structure was insisted. I've kept creation of dummy
> device as a separate patch to illustrate the alternatives. It can be
> later squashed into other patches.
>
> The patch set adds 2D driver to tegradrm, which uses host1x for
> communicating with host1x to access sync points and channels. We
> expect to use the same infrastructure for other host1x clients, so
> we have kept host1x and tegradrm separate.
>
> The patch set also adds user space API to tegradrm for accessing
> host1x and 2D.
>
> Arto Merilainen (1):
> drm: tegra: Remove redundant host1x
>
> Terje Bergstrom (7):
> gpu: host1x: Add host1x driver
> gpu: host1x: Add syncpoint wait and interrupts
> gpu: host1x: Add channel support
> gpu: host1x: Add debug support
> ARM: tegra: Add board data and 2D clocks
> drm: tegra: Add gr2d device
> gpu: host1x: Register DRM dummy device
>
> arch/arm/mach-tegra/board-dt-tegra20.c | 1 +
> arch/arm/mach-tegra/board-dt-tegra30.c | 1 +
> arch/arm/mach-tegra/tegra20_clocks_data.c | 2 +-
> arch/arm/mach-tegra/tegra30_clocks_data.c | 1 +
> drivers/gpu/Makefile | 1 +
> drivers/gpu/drm/tegra/Kconfig | 2 +-
> drivers/gpu/drm/tegra/Makefile | 2 +-
> drivers/gpu/drm/tegra/dc.c | 26 +-
> drivers/gpu/drm/tegra/drm.c | 433 ++++++++++++++++++-
> drivers/gpu/drm/tegra/drm.h | 72 ++--
> drivers/gpu/drm/tegra/fb.c | 17 +-
> drivers/gpu/drm/tegra/gr2d.c | 309 ++++++++++++++
> drivers/gpu/drm/tegra/hdmi.c | 30 +-
> drivers/gpu/drm/tegra/host1x.c | 325 --------------
> drivers/gpu/host1x/Kconfig | 28 ++
> drivers/gpu/host1x/Makefile | 17 +
> drivers/gpu/host1x/cdma.c | 475 ++++++++++++++++++++
> drivers/gpu/host1x/cdma.h | 107 +++++
> drivers/gpu/host1x/channel.c | 137 ++++++
> drivers/gpu/host1x/channel.h | 64 +++
> drivers/gpu/host1x/cma.c | 117 +++++
> drivers/gpu/host1x/cma.h | 43 ++
> drivers/gpu/host1x/debug.c | 207 +++++++++
> drivers/gpu/host1x/debug.h | 49 +++
> drivers/gpu/host1x/dev.c | 242 +++++++++++
> drivers/gpu/host1x/dev.h | 167 ++++++++
> drivers/gpu/host1x/drm.c | 51 +++
> drivers/gpu/host1x/drm.h | 25 ++
> drivers/gpu/host1x/hw/Makefile | 6 +
> drivers/gpu/host1x/hw/cdma_hw.c | 480 +++++++++++++++++++++
> drivers/gpu/host1x/hw/cdma_hw.h | 37 ++
> drivers/gpu/host1x/hw/channel_hw.c | 147 +++++++
> drivers/gpu/host1x/hw/debug_hw.c | 399 +++++++++++++++++
> drivers/gpu/host1x/hw/host1x01.c | 46 ++
> drivers/gpu/host1x/hw/host1x01.h | 25 ++
> drivers/gpu/host1x/hw/host1x01_hardware.h | 150 +++++++
> drivers/gpu/host1x/hw/hw_host1x01_channel.h | 98 +++++
> drivers/gpu/host1x/hw/hw_host1x01_sync.h | 179 ++++++++
> drivers/gpu/host1x/hw/hw_host1x01_uclass.h | 130 ++++++
> drivers/gpu/host1x/hw/intr_hw.c | 178 ++++++++
> drivers/gpu/host1x/hw/syncpt_hw.c | 157 +++++++
> drivers/gpu/host1x/intr.c | 377 ++++++++++++++++
> drivers/gpu/host1x/intr.h | 106 +++++
> drivers/gpu/host1x/job.c | 618 +++++++++++++++++++++++++++
> drivers/gpu/host1x/memmgr.c | 174 ++++++++
> drivers/gpu/host1x/memmgr.h | 53 +++
> drivers/gpu/host1x/syncpt.c | 398 +++++++++++++++++
> drivers/gpu/host1x/syncpt.h | 134 ++++++
> drivers/video/Kconfig | 2 +
> include/drm/tegra_drm.h | 131 ++++++
> include/linux/host1x.h | 217 ++++++++++
> include/trace/events/host1x.h | 296 +++++++++++++
> 52 files changed, 7095 insertions(+), 394 deletions(-)
> create mode 100644 drivers/gpu/drm/tegra/gr2d.c
> delete mode 100644 drivers/gpu/drm/tegra/host1x.c
> create mode 100644 drivers/gpu/host1x/Kconfig
> create mode 100644 drivers/gpu/host1x/Makefile
> create mode 100644 drivers/gpu/host1x/cdma.c
> create mode 100644 drivers/gpu/host1x/cdma.h
> create mode 100644 drivers/gpu/host1x/channel.c
> create mode 100644 drivers/gpu/host1x/channel.h
> create mode 100644 drivers/gpu/host1x/cma.c
> create mode 100644 drivers/gpu/host1x/cma.h
> create mode 100644 drivers/gpu/host1x/debug.c
> create mode 100644 drivers/gpu/host1x/debug.h
> create mode 100644 drivers/gpu/host1x/dev.c
> create mode 100644 drivers/gpu/host1x/dev.h
> create mode 100644 drivers/gpu/host1x/drm.c
> create mode 100644 drivers/gpu/host1x/drm.h
> create mode 100644 drivers/gpu/host1x/hw/Makefile
> create mode 100644 drivers/gpu/host1x/hw/cdma_hw.c
> create mode 100644 drivers/gpu/host1x/hw/cdma_hw.h
> create mode 100644 drivers/gpu/host1x/hw/channel_hw.c
> create mode 100644 drivers/gpu/host1x/hw/debug_hw.c
> create mode 100644 drivers/gpu/host1x/hw/host1x01.c
> create mode 100644 drivers/gpu/host1x/hw/host1x01.h
> create mode 100644 drivers/gpu/host1x/hw/host1x01_hardware.h
> create mode 100644 drivers/gpu/host1x/hw/hw_host1x01_channel.h
> create mode 100644 drivers/gpu/host1x/hw/hw_host1x01_sync.h
> create mode 100644 drivers/gpu/host1x/hw/hw_host1x01_uclass.h
> create mode 100644 drivers/gpu/host1x/hw/intr_hw.c
> create mode 100644 drivers/gpu/host1x/hw/syncpt_hw.c
> create mode 100644 drivers/gpu/host1x/intr.c
> create mode 100644 drivers/gpu/host1x/intr.h
> create mode 100644 drivers/gpu/host1x/job.c
> create mode 100644 drivers/gpu/host1x/memmgr.c
> create mode 100644 drivers/gpu/host1x/memmgr.h
> create mode 100644 drivers/gpu/host1x/syncpt.c
> create mode 100644 drivers/gpu/host1x/syncpt.h
> create mode 100644 include/drm/tegra_drm.h
> create mode 100644 include/linux/host1x.h
> create mode 100644 include/trace/events/host1x.h
>


\
 
 \ /
  Last update: 2012-12-28 11:01    [W:0.155 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site