lkml.org 
[lkml]   [2012]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: Dove: add fixed regulator for CuBox USB power
Date
CuBox needs to enable USB power on a gpio pin. Add a fixed regulator
to always enable usb power on boot.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm/boot/dts/dove-cubox.dts | 25 ++++++++++++++++++++++++-
arch/arm/mach-dove/Kconfig | 2 ++
2 files changed, 26 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index bed5b62..7e3065a 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -26,6 +26,24 @@
linux,default-trigger = "default-on";
};
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 1 0>;
+ };
+ };
};

&uart0 { status = "okay"; };
@@ -50,9 +68,14 @@
};

&pinctrl {
- pinctrl-0 = <&pmx_gpio_12>;
+ pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>;
pinctrl-names = "default";

+ pmx_gpio_1: pmx-gpio-1 {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
+ };
+
pmx_gpio_12: pmx-gpio-12 {
marvell,pins = "mpp12";
marvell,function = "gpio";
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index aedd0ba..36469d8 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -24,6 +24,8 @@ config MACH_DOVE_DT
bool "Marvell Dove Flattened Device Tree"
select MVEBU_CLK_CORE
select MVEBU_CLK_GATING
+ select REGULATOR
+ select REGULATOR_FIXED_VOLTAGE
select USE_OF
help
Say 'Y' here if you want your kernel to support the
--
1.7.10.4


\
 
 \ /
  Last update: 2012-12-28 00:01    [W:0.048 / U:1.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site