lkml.org 
[lkml]   [2012]   [Dec]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] regulator: lp8755: Fix mask for pchip->mphase
From
Date
According to lp8755.h:
enum lp8755_mphase_config {
MPHASE_CONF0,
MPHASE_CONF1,
MPHASE_CONF2,
MPHASE_CONF3,
MPHASE_CONF4,
MPHASE_CONF5,
MPHASE_CONF6,
MPHASE_CONF7,
MPHASE_CONF8,
MPHASE_CONF_MAX
};

MPHASE_CONF_MAX is 9, the mask for pchip->mphase should be 0x17.
Otherwise, we cannot differentiate MPHASE_CONF0 and MPHASE_CONF8.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
Hi Daniel,
I don't have the datasheet, can you check if this patch is correct?

BTW, I'm Axel, not Alex.

Regards,
Axel
drivers/regulator/lp8755.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
index 06a82e2..6d5a11d 100644
--- a/drivers/regulator/lp8755.c
+++ b/drivers/regulator/lp8755.c
@@ -301,7 +301,7 @@ static int lp8755_init_data(struct lp8755_chip *pchip)
ret = lp8755_read(pchip, 0x3D, &regval);
if (ret < 0)
goto out_i2c_error;
- pchip->mphase = regval & 0x07;
+ pchip->mphase = regval & 0x17;

/* set default data based on multi-phase config */
for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) {
--
1.7.9.5




\
 
 \ /
  Last update: 2012-12-26 03:41    [W:3.146 / U:1.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site