lkml.org 
[lkml]   [2012]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/7] MMC:rtsx: Using callback function to switch output voltage
Date
From: Wei WANG <wei_wang@realsil.com.cn>

Different card reader has different method to switch output voltage, so
we have to use the callback function provided by MFD driver to switch
output pad voltage.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
---
drivers/mmc/host/rtsx_pci_sdmmc.c | 30 +++++-------------------------
1 file changed, 5 insertions(+), 25 deletions(-)

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 571915d..f74b5ad 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -1060,26 +1060,6 @@ static int sd_wait_voltage_stable_2(struct realtek_pci_sdmmc *host)
return 0;
}

-static int sd_change_bank_voltage(struct realtek_pci_sdmmc *host, u8 voltage)
-{
- struct rtsx_pcr *pcr = host->pcr;
- int err;
-
- if (voltage == SD_IO_3V3) {
- err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24);
- if (err < 0)
- return err;
- } else if (voltage == SD_IO_1V8) {
- err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24);
- if (err < 0)
- return err;
- } else {
- return -EINVAL;
- }
-
- return 0;
-}
-
static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
@@ -1098,11 +1078,11 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
rtsx_pci_start_run(pcr);

if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
- voltage = SD_IO_3V3;
+ voltage = OUTPUT_3V3;
else
- voltage = SD_IO_1V8;
+ voltage = OUTPUT_1V8;

- if (voltage == SD_IO_1V8) {
+ if (voltage == OUTPUT_1V8) {
err = rtsx_pci_write_register(pcr,
SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B);
if (err < 0)
@@ -1113,11 +1093,11 @@ static int sdmmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
goto out;
}

- err = sd_change_bank_voltage(host, voltage);
+ err = rtsx_pci_switch_output_voltage(pcr, voltage);
if (err < 0)
goto out;

- if (voltage == SD_IO_1V8) {
+ if (voltage == OUTPUT_1V8) {
err = sd_wait_voltage_stable_2(host);
if (err < 0)
goto out;
--
1.7.9.5


\
 
 \ /
  Last update: 2012-12-24 07:21    [W:0.068 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site