lkml.org 
[lkml]   [2012]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 4/9] mailbox: create opened message type
Date
On Tue, Dec 18, 2012 at 18:40:07, Loic Pallardy wrote:
> Current message type is a u32 to fit HW fifo format.
> This should be extended to support any message exchanges
> and type of mailbox.
> Propose structure owns the original u32 and an optional
> pointer on additional data.
>
> Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
> ---
> drivers/mailbox/Kconfig | 9 ++++++
> drivers/mailbox/mailbox-omap1.c | 18 ++++++------
> drivers/mailbox/mailbox-omap2.c | 10 ++++---
> drivers/mailbox/mailbox.c | 64 +++++++++++++++++++++++++++++------------
> drivers/mailbox/mailbox.h | 6 ++--
> include/linux/mailbox.h | 17 ++++++++++-
> 6 files changed, 89 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
> index d1e7d74..efb766f 100644
> --- a/drivers/mailbox/Kconfig
> +++ b/drivers/mailbox/Kconfig
> @@ -33,4 +33,13 @@ config MBOX_KFIFO_SIZE
> This can also be changed at runtime (via the mbox_kfifo_size
> module parameter).
>
> +config MBOX_DATA_SIZE
> + int "Mailbox associated data max size (bytes)"
> + default 64
> + help
> + Specify the default size of mailbox's associated data buffer
> + (bytes)
> + This can also be changed at runtime (via the mbox_kfifo_size
> + module parameter).
> +
> endif
> diff --git a/drivers/mailbox/mailbox-omap1.c b/drivers/mailbox/mailbox-omap1.c
> index 31cb70a..94e90af 100644
> --- a/drivers/mailbox/mailbox-omap1.c
> +++ b/drivers/mailbox/mailbox-omap1.c
> @@ -50,26 +50,26 @@ static inline void mbox_write_reg(u32 val, size_t ofs)
> }
>
> /* msg */
> -static mbox_msg_t omap1_mbox_fifo_read(struct mailbox *mbox)
> +static int omap1_mbox_fifo_read(struct mailbox *mbox, struct mailbox_msg *msg)
> {
> struct omap_mbox1_fifo *fifo =
> &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
> - mbox_msg_t msg;
>
> - msg = mbox_read_reg(fifo->data);
> - msg |= ((mbox_msg_t) mbox_read_reg(fifo->cmd)) << 16;
> + msg->header = mbox_read_reg(fifo->data);
> + msg->header |= ((mbox_msg_t) mbox_read_reg(fifo->cmd)) << 16;

Now that struct mailbox_msg encapsulates the data, you can
get rid of the mbox_msg_t typedef completely. Having the data
as part of the mailbox_msg along with the functions with mbox_msg_t
as the return type just creates confusion IMHO.

>
> - return msg;
> + return 0;
> }

Convert all return 0 functions to void?

[...]

>
> diff --git a/include/linux/mailbox.h b/include/linux/mailbox.h
> index 18c9502..d256e1a 100644
> --- a/include/linux/mailbox.h
> +++ b/include/linux/mailbox.h
> @@ -7,7 +7,22 @@ typedef int __bitwise mailbox_irq_t;
> #define IRQ_TX ((__force mailbox_irq_t) 1)
> #define IRQ_RX ((__force mailbox_irq_t) 2)
>
> -int mailbox_msg_send(struct mailbox *, mbox_msg_t msg);
> +struct mailbox_msg {
> + int size;
> + u32 header;
> + void *pdata;
> +};
> +
> +#define MAILBOX_FILL_MSG(_msg, _header, _pdata, _size) { \
> + _msg.header = _header; \
> + _msg.pdata = (void *)_pdata; \
> + _msg.size = _size; \
> +}
> +
> +#define MAILBOX_FILL_HEADER_MSG(_msg, _header) \
> + MAILBOX_FILL_MSG(_msg, _header, NULL, 0);
> +

I used these patches as part of the suspend-resume support for AM335x
which has the same mailbox IP as OMAP4. I used the MAILBOX_FILL_HEADER_MSG
helper and things work as expected.

However, I found the 'header' part to be very confusing. Why not treat the
OMAP case as a special case of the new MAILBOX_FILL_MSG where the data size
is set to 1?

Regards,
Vaibhav


\
 
 \ /
  Last update: 2012-12-21 12:21    [W:0.179 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site