lkml.org 
[lkml]   [2012]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] PCI: cpqphp: minor cleanup and removal of unreachable paths
Date
Remove cases of redundant checks and remote unreachable paths.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
---
drivers/pci/hotplug/cpqphp_ctrl.c | 57 ++++++++++++++-------------------------
1 file changed, 20 insertions(+), 37 deletions(-)

diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 36112fe..d282019 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1900,8 +1900,7 @@ static void interrupt_event_handler(struct controller *ctrl)
dbg("power fault\n");
} else {
/* refresh notification */
- if (p_slot)
- update_slot_info(ctrl, p_slot);
+ update_slot_info(ctrl, p_slot);
}

ctrl->event_queue[loop].event_type = 0;
@@ -2520,44 +2519,28 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func

/* If we have IO resources copy them and fill in the bridge's
* IO range registers */
- if (io_node) {
- memcpy(hold_IO_node, io_node, sizeof(struct pci_resource));
- io_node->next = NULL;
+ memcpy(hold_IO_node, io_node, sizeof(struct pci_resource));
+ io_node->next = NULL;

- /* set IO base and Limit registers */
- temp_byte = io_node->base >> 8;
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_BASE, temp_byte);
+ /* set IO base and Limit registers */
+ temp_byte = io_node->base >> 8;
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_BASE, temp_byte);

- temp_byte = (io_node->base + io_node->length - 1) >> 8;
- rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
- } else {
- kfree(hold_IO_node);
- hold_IO_node = NULL;
- }
-
- /* If we have memory resources copy them and fill in the
- * bridge's memory range registers. Otherwise, fill in the
- * range registers with values that disable them. */
- if (mem_node) {
- memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource));
- mem_node->next = NULL;
-
- /* set Mem base and Limit registers */
- temp_word = mem_node->base >> 16;
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
+ temp_byte = (io_node->base + io_node->length - 1) >> 8;
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte);

- temp_word = (mem_node->base + mem_node->length - 1) >> 16;
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
- } else {
- temp_word = 0xFFFF;
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
+ /* Copy the memory resources and fill in the bridge's memory
+ * range registers.
+ */
+ memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource));
+ mem_node->next = NULL;

- temp_word = 0x0000;
- rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+ /* set Mem base and Limit registers */
+ temp_word = mem_node->base >> 16;
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);

- kfree(hold_mem_node);
- hold_mem_node = NULL;
- }
+ temp_word = (mem_node->base + mem_node->length - 1) >> 16;
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);

memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource));
p_mem_node->next = NULL;
@@ -2627,7 +2610,7 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
/* Return unused bus resources
* First use the temporary node to store information for
* the board */
- if (hold_bus_node && bus_node && temp_resources.bus_head) {
+ if (bus_node && temp_resources.bus_head) {
hold_bus_node->length = bus_node->base - hold_bus_node->base;

hold_bus_node->next = func->bus_head;
@@ -2751,7 +2734,7 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
}
/* If we have prefetchable memory space available and there
* is some left at the end, return the unused portion */
- if (hold_p_mem_node && temp_resources.p_mem_head) {
+ if (temp_resources.p_mem_head) {
p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head),
&hold_p_mem_node, 0x100000);

--
1.8.0


\
 
 \ /
  Last update: 2012-12-21 01:41    [W:0.350 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site