lkml.org 
[lkml]   [2012]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/9] clocksource: tegra: Enable ARM arch_timer with TSC
On 20/12/12 14:42, Hiroshi Doyu wrote:
> Marc Zyngier <marc.zyngier@arm.com> wrote @ Thu, 20 Dec 2012 14:32:21 +0100:
>
>> On 20/12/12 12:55, Peter De Schrijver wrote:
>>> On Thu, Dec 20, 2012 at 01:33:42PM +0100, Marc Zyngier wrote:
>>>> On 20/12/12 12:22, Peter De Schrijver wrote:
>>>>>>>>> +
>>>>>>>>> + /* CNTFRQ */
>>>>>>>>> + asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq));
>>>>>>>>> + asm("mrc p15, 0, %0, c14, c0, 0\n" : "=r" (val));
>>>>>>>>> + BUG_ON(val != freq);
>>>>>>>>
>>>>>>>> This is scary. CNTFRQ is only writable from secure mode, and will
>>>>>>>> explode in any other situation.
>>>>>>>>
>>>>>>>> Also, writing to CNTFRQ doesn't change the timer frequency! This is just
>>>>>>>> a way for secure mode to tell the rest of the world the frequency the
>>>>>>>> timer is ticking at. Unless you've wired the input clock to be able to
>>>>>>>> change the frequency?
>>>>>>>
>>>>>>> ATM, our upstream kernel is expected in secure mode. This situation
>>>>>>> may be changed later, though....
>>>>>>
>>>>>> I appreciate this. But I expect this kernel to be also used on the
>>>>>> non-secure side if someone tried to run KVM with it. And this would go
>>>>>> bang right away.
>>>>>>
>>>>>
>>>>> But the guest wouldn't necessarily have this peripheral, or any other Tegra114
>>>>> peripheral for that matter?
>>>>
>>>> The problem is not so much the guest but the host. The host has to be
>>>> booted in non-secure, so just saying "we do not support non-secure" is
>>>> not a very convincing argument.
>>>>
>>>> Unless of course you've already decided that you don't want to support
>>>> KVM on this SoC...
>>>>
>>>
>>> I guess that means we can't support KVM yet. Tegra does not have a secure
>>> monitor by default. It all depends on what that system integrator does.
>>
>> VExpress doesn't have a secure monitor either, and yet we run KVM on it
>> (by switching to non-secure before loading the kernel). Same for Exynos5.
>>
>> What I'm trying to say is that this code is rather pointless (this
>> should be done by the firmware/bootloader, not the kernel, or the
>> information should be provided in DT if CNTFRQ is not set).
>
> "tegra114.dtsi" has the folloiwng "tsc" entry. So can we consider that
> if dts has this entry, CNTFRQ is not set, which implies it's in secure
> mode. kernel should set it up by itself? Otherwise, skip this setup
> and use it. For example:
>
> tsc {
> compatible = "nvidia,tegra114-tsc";
> reg = <0x700f0000 0x20000>;
> + setup-cntfrq;
> };
>
> Is this what you explained in the above?
> At least, kernel can survive without bootloader/firmware support, ATM.

No. The DT should only describe the hardware, and not something that is
Linux specific.

Just use the "clock-frequency" attribute in the timer arch-timer node,
and get rid of this CNTFRQ setting. The driver already knows how to deal
with this situation if this attribute is set.

Thanks,

M.
--
Jazz is not dead. It just smells funny...



\
 
 \ /
  Last update: 2012-12-20 18:41    [W:0.065 / U:1.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site