lkml.org 
[lkml]   [2012]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 5/9] clocksource: tegra: Enable ARM arch_timer with TSC
Marc Zyngier <marc.zyngier@arm.com> wrote @ Thu, 20 Dec 2012 13:05:45 +0100:

> On 20/12/12 11:57, Hiroshi Doyu wrote:
> > Marc Zyngier <marc.zyngier@arm.com> wrote @ Thu, 20 Dec 2012 12:01:15 +0100:
> >
> >> On 20/12/12 09:44, Hiroshi Doyu wrote:
> >>> Add platform enabler for ARM arch_timer(TSC). TSC is more fine grained
> >>> timer than TMR0. If it's available, it will be used for clock source
> >>> and sched_clock. Otherwise, TMR0 is used. In any case TMR0 is
> >>> necessary for clock event.
> >>>
> >>> Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
> >>> ---
> >>> .../bindings/arm/tegra/nvidia,tegra114-tsc.txt | 11 ++++
> >>> drivers/clocksource/tegra20_timer.c | 64 +++++++++++++++++++-
> >>> 2 files changed, 74 insertions(+), 1 deletion(-)
> >>> create mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra114-tsc.txt
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra114-tsc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra114-tsc.txt
> >>> new file mode 100644
> >>> index 0000000..9de936a
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra114-tsc.txt
> >>> @@ -0,0 +1,11 @@
> >>> +NVIDIA Tegra Timer Stamp Counter(TSC)
> >>> +
> >>> +Required properties:
> >>> +- compatible : "nvidia,tegra114-tsc
> >>> +- reg : Should contain 1 register ranges(address and length)
> >>> +
> >>> +Example:
> >>> + tsc {
> >>> + compatible = "nvidia,tegra114-tsc";
> >>> + reg = <0x700f0000 0x20000>;
> >>> + };
> >>> diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
> >>> index 1d25de8..285a6f1 100644
> >>> --- a/drivers/clocksource/tegra20_timer.c
> >>> +++ b/drivers/clocksource/tegra20_timer.c
> >>> @@ -30,6 +30,7 @@
> >>> #include <asm/mach/time.h>
> >>> #include <asm/smp_twd.h>
> >>> #include <asm/sched_clock.h>
> >>> +#include <asm/arch_timer.h>
> >>>
> >>> #define RTC_SECONDS 0x08
> >>> #define RTC_SHADOW_SECONDS 0x0c
> >>> @@ -271,10 +272,71 @@ static void __init tegra20_init_tmr(void)
> >>> clockevents_register_device(&tegra_clockevent);
> >>> }
> >>>
> >>> +#define TSC_CNTCR 0 /* TSC control registers */
> >>> +#define TSC_CNTCR_ENABLE (1 << 0) /* Enable */
> >>> +#define TSC_CNTCR_HDBG (1 << 1) /* Halt on debug */
> >>> +
> >>> +#define TSC_CNTCV0 0x8 /* TSC counter (LSW) */
> >>> +#define TSC_CNTCV1 0xc /* TSC counter (MSW) */
> >>> +#define TSC_CNTFID0 0x20 /* TSC freq id 0 */
> >>> +
> >>> +static const struct of_device_id tegra_tsc_match[] __initconst = {
> >>> + { .compatible = "nvidia,tegra114-tsc" },
> >>> + {}
> >>> +};
> >>> +
> >>> +static int tegra_arch_timer_init(void)
> >>> +{
> >>> + int err;
> >>> + struct device_node *np;
> >>> + struct clk *clk;
> >>> + void __iomem *tsc_base;
> >>> + u32 freq, val;
> >>> +
> >>> + np = of_find_matching_node(NULL, tegra_tsc_match);
> >>> + if (!np)
> >>> + return -ENODEV;
> >>> +
> >>> + tsc_base = of_iomap(np, 0);
> >>> + if (!tsc_base)
> >>> + return -ENODEV;
> >>> +
> >>> + clk = clk_get_sys("clk_m", NULL);
> >>> + if (IS_ERR(clk)) {
> >>> + freq = 12000000;
> >>> + pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n");
> >>> + } else {
> >>> + freq = clk_get_rate(clk);
> >>> + clk_put(clk);
> >>> + }
> >>> + writel_relaxed(freq, tsc_base + TSC_CNTFID0);
> >>> +
> >>> + /* CNTFRQ */
> >>> + asm("mcr p15, 0, %0, c14, c0, 0\n" : : "r" (freq));
> >>> + asm("mrc p15, 0, %0, c14, c0, 0\n" : "=r" (val));
> >>> + BUG_ON(val != freq);
> >>
> >> This is scary. CNTFRQ is only writable from secure mode, and will
> >> explode in any other situation.
> >>
> >> Also, writing to CNTFRQ doesn't change the timer frequency! This is just
> >> a way for secure mode to tell the rest of the world the frequency the
> >> timer is ticking at. Unless you've wired the input clock to be able to
> >> change the frequency?
> >
> > ATM, our upstream kernel is expected in secure mode. This situation
> > may be changed later, though....
>
> I appreciate this. But I expect this kernel to be also used on the
> non-secure side if someone tried to run KVM with it. And this would go
> bang right away.

What is the common way to make the above code selective at run
time(secure or non-secure path)?


\
 
 \ /
  Last update: 2012-12-20 15:01    [W:0.107 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site