lkml.org 
[lkml]   [2012]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] usb: phy: samsung: Add support to set pmu isolation
From
CC: Doug Anderson


On Wed, Dec 19, 2012 at 4:49 AM, Sylwester Nawrocki
<sylvester.nawrocki@gmail.com> wrote:
> Hi Vivek,
>
>
> On 12/18/2012 02:56 PM, Vivek Gautam wrote:
>>
>> Adding support to parse device node data in order to get
>> required properties to set pmu isolation for usb-phy.
>>
>> Signed-off-by: Vivek Gautam<gautam.vivek@samsung.com>
>> ---
>>
>> Changes from v1:
>> - Changed the name of property for phy handler from'samsung,usb-phyctrl'
>> to 'samsung,usb-phyhandle' to make it look more generic.
>> - Similarly 'samsung,phyctrl-reg' is changed to 'samsung,phyhandle-reg'
>> - Added a check for 'samsung,usb-phyhandle' before getting node from
>> phandle.
>> - Putting the node using 'of_node_put()' which had been missed.
>> - Adding necessary check for the pointer in
>> 'samsung_usbphy_set_isolation()'
>> to avoid any NULL pointer dereferencing.
>> - Unmapping the register ioremapped in
>> 'samsung_usbphy_parse_dt_param()'.
>>
>>
>> .../devicetree/bindings/usb/samsung-usbphy.txt | 12 +++
>> drivers/usb/phy/samsung-usbphy.c | 94
>> ++++++++++++++++++--
>> 2 files changed, 98 insertions(+), 8 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> index 7b26e2d..a7b28b2 100644
>> --- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>> @@ -9,3 +9,15 @@ Required properties:
>> - compatible : should be "samsung,exynos4210-usbphy"
>> - reg : base physical address of the phy registers and length of memory
>> mapped
>> region.
>> +
>> +Optional properties:
>> +- samsung,usb-phyhandle : should point to usb-phyhandle sub-node which
>> provides
>> + binding data to enable/disable device PHY handled
>> by
>> + PMU register.
>> +
>> + Required properties:
>> + - compatible : should be "samsung,usbdev-phyctrl"
>> for
>> + DEVICE type phy.
>> + - samsung,phyhandle-reg: base physical address of
>> + PHY_CONTROL register in
>> PMU.
>> +- samsung,enable-mask : should be '1'
>
>
> This should only be 1 for Exynos4210+ SoCs, right ?
> S5PV210 uses bit 0 for OTG and bit1 for USB host, doesn't it ? And for
> s3c64xx
> it seems to be bit 16.
>
> How about deriving this information from 'compatible' property instead ?
>
> Maybe you could just encode the USB PMU registers (I assume those aren't
> touched by anything but the usb drivers) in a regular 'reg' property in
> an usbphy subnode. Then the driver could interpret it also with help
> of 'compatible' property. And you could just use of_iomap(). E.g.
>
> usbphy@12130000 {
> compatible = "samsung,exynos5250-usbphy";
> reg = <0x12130000 0x100>, <0x12100000 0x100>;
> usbphy-pmu {
> /* USB device and host PHY_CONTROL registers */
> reg = <0x10040704 8>;
> };
> };
>
> Your "samsung,usb-phyhandle" approach seems over-engineered to me.
> I might be missing something though.
>
>
>> diff --git a/drivers/usb/phy/samsung-usbphy.c
>> b/drivers/usb/phy/samsung-usbphy.c
>> index 5c5e1bb5..4ceabe3 100644
>> --- a/drivers/usb/phy/samsung-usbphy.c
>> +++ b/drivers/usb/phy/samsung-usbphy.c
>> @@ -72,6 +72,8 @@ enum samsung_cpu_type {
>> * @dev: The parent device supplied to the probe function
>> * @clk: usb phy clock
>> * @regs: usb phy register memory base
>> + * @devctrl_reg: usb device phy-control pmu register memory base
>
>
> hum, this name is not really helpful in understanding what's going
> on here.
>
> Looking at arch/arm/mach-s5pv210/setup-usb-phy.c, there is only one
> PHY_CONTROL (Power Management Unit) register for both OTG and USB host
> PHYs. So are you really taking care of that case as well ?
>
>
>> + * @en_mask: enable mask
>> * @ref_clk_freq: reference clock frequency selection
>> * @cpu_type: machine identifier
>> */
>> @@ -81,12 +83,73 @@ struct samsung_usbphy {
>> struct device *dev;
>> struct clk *clk;
>> void __iomem *regs;
>> + void __iomem *devctrl_reg;
>> + u32 en_mask;
>> int ref_clk_freq;
>> int cpu_type;
>> };
>>
>> #define phy_to_sphy(x) container_of((x), struct
>> samsung_usbphy, phy)
>>
>> +static int samsung_usbphy_parse_dt_param(struct samsung_usbphy *sphy)
>> +{
>> + struct device_node *usb_phyctrl;
>> + u32 reg;
>> + int lenp;
>> +
>> + if (!sphy->dev->of_node) {
>> + sphy->devctrl_reg = NULL;
>> + return -ENODEV;
>> + }
>> +
>> + if (of_get_property(sphy->dev->of_node,
>> "samsung,usb-phyhandle",&lenp)) {
>> + usb_phyctrl = of_parse_phandle(sphy->dev->of_node,
>> + "samsung,usb-phyhandle",
>> 0);
>> + if (!usb_phyctrl) {
>> + dev_warn(sphy->dev, "Can't get usb-phy handle\n");
>> + sphy->devctrl_reg = NULL;
>> + }
>> +
>> + of_property_read_u32(usb_phyctrl,
>> "samsung,phyhandle-reg",&reg);
>> +
>> + sphy->devctrl_reg = ioremap(reg, SZ_4);
>
>
> What happens if invalid address value is assigned to 'samsung,phyhandle-reg'
> ?
>
>> + of_property_read_u32(sphy->dev->of_node,
>> "samsung,enable-mask",
>> + &sphy->en_mask);
>> + of_node_put(usb_phyctrl);
>> + } else {
>> + dev_warn(sphy->dev, "Can't get usb-phy handle\n");
>> + sphy->devctrl_reg = NULL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * Set isolation here for phy.
>> + * SOCs control this by controlling corresponding PMU registers
>> + */
>> +static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, int
>> on)
>> +{
>> + void __iomem *usb_phyctrl_reg;
>> + u32 en_mask = sphy->en_mask;
>> + u32 reg;
>> +
>> + usb_phyctrl_reg = sphy->devctrl_reg;
>> +
>> + if (!usb_phyctrl_reg) {
>> + dev_warn(sphy->dev, "Can't set pmu isolation\n");
>> + return;
>> + }
>> +
>> + reg = readl(usb_phyctrl_reg);
>> +
>> + if (on)
>> + writel(reg& ~en_mask, usb_phyctrl_reg);
>>
>> + else
>> + writel(reg | en_mask, usb_phyctrl_reg);
>> +}
>> +
>> /*
>> * Returns reference clock frequency selection value
>> */
>> @@ -199,6 +262,8 @@ static int samsung_usbphy_init(struct usb_phy *phy)
>> /* Disable phy isolation */
>> if (sphy->plat&& sphy->plat->pmu_isolation)
>>
>> sphy->plat->pmu_isolation(false);
>> + else
>> + samsung_usbphy_set_isolation(sphy, false);
>>
>> /* Initialize usb phy registers */
>> samsung_usbphy_enable(sphy);
>> @@ -228,6 +293,8 @@ static void samsung_usbphy_shutdown(struct usb_phy
>> *phy)
>> /* Enable phy isolation */
>> if (sphy->plat&& sphy->plat->pmu_isolation)
>>
>> sphy->plat->pmu_isolation(true);
>> + else
>> + samsung_usbphy_set_isolation(sphy, true);
>>
>> clk_disable_unprepare(sphy->clk);
>> }
>> @@ -249,17 +316,12 @@ static inline int
>> samsung_usbphy_get_driver_data(struct platform_device *pdev)
>> static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
>> {
>> struct samsung_usbphy *sphy;
>> - struct samsung_usbphy_data *pdata;
>> + struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
>> struct device *dev =&pdev->dev;
>>
>> struct resource *phy_mem;
>> void __iomem *phy_base;
>> struct clk *clk;
>> -
>> - pdata = pdev->dev.platform_data;
>> - if (!pdata) {
>> - dev_err(&pdev->dev, "%s: no platform data defined\n",
>> __func__);
>> - return -EINVAL;
>> - }
>> + int ret;
>>
>> phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> if (!phy_mem) {
>> @@ -283,7 +345,20 @@ static int __devinit samsung_usbphy_probe(struct
>> platform_device *pdev)
>> return PTR_ERR(clk);
>> }
>>
>> - sphy->dev =&pdev->dev;
>> + sphy->dev =&pdev->dev;
>
>
> sphy->dev = dev;
>
>
>> +
>> + ret = samsung_usbphy_parse_dt_param(sphy);
>> + if (ret) {
>> + /* fallback to pdata */
>> + if (!pdata) {
>> + dev_err(&pdev->dev,
>> + "%s: no device data found\n", __func__);
>
>
> I find term "device data" a bit confusing here.
>
>> + return -ENODEV;
>
>
> In the original code -EINVAL was returned when platform_data was not set.
>
>
>> + } else {
>> + sphy->plat = pdata;
>> + }
>> + }
>> +
>
>
> How about rewriting this to:
>
> if (dev->of_node) {
> ret = samsung_usbphy_parse_dt_param(sphy);
> if (ret < 0)
> return ret;
> } else {
> if (!pdata) {
> dev_err(dev, "no platform data specified\n");
> return -EINVAL;
> }
> }
>
> This way we won't be obfuscating any error code returned from the
> OF parsing function.
>
>
>> sphy->plat = pdata;
>> sphy->regs = phy_base;
>> sphy->clk = clk;
>> @@ -305,6 +380,9 @@ static int __exit samsung_usbphy_remove(struct
>> platform_device *pdev)
>>
>> usb_remove_phy(&sphy->phy);
>>
>> + if (sphy->devctrl_reg)
>> + iounmap(sphy->devctrl_reg);
>> +
>> return 0;
>> }
>
>
> --
>
> Regards,
> Sylwester
>
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss



--
Thanks & Regards
Vivek


\
 
 \ /
  Last update: 2012-12-19 07:21    [W:0.247 / U:1.652 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site