lkml.org 
[lkml]   [2012]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] usb: phy: samsung: Add support to set pmu isolation
From
Hi Sylwester,


On Wed, Dec 19, 2012 at 11:05 AM, Vivek Gautam
<gautamvivek1987@gmail.com> wrote:
> CC: Doug Anderson
>
>
> On Wed, Dec 19, 2012 at 4:49 AM, Sylwester Nawrocki
> <sylvester.nawrocki@gmail.com> wrote:
>> Hi Vivek,
>>
>>
>> On 12/18/2012 02:56 PM, Vivek Gautam wrote:
>>>
>>> Adding support to parse device node data in order to get
>>> required properties to set pmu isolation for usb-phy.
>>>
>>> Signed-off-by: Vivek Gautam<gautam.vivek@samsung.com>
>>> ---
>>>
>>> Changes from v1:
>>> - Changed the name of property for phy handler from'samsung,usb-phyctrl'
>>> to 'samsung,usb-phyhandle' to make it look more generic.
>>> - Similarly 'samsung,phyctrl-reg' is changed to 'samsung,phyhandle-reg'
>>> - Added a check for 'samsung,usb-phyhandle' before getting node from
>>> phandle.
>>> - Putting the node using 'of_node_put()' which had been missed.
>>> - Adding necessary check for the pointer in
>>> 'samsung_usbphy_set_isolation()'
>>> to avoid any NULL pointer dereferencing.
>>> - Unmapping the register ioremapped in
>>> 'samsung_usbphy_parse_dt_param()'.
>>>
>>>
>>> .../devicetree/bindings/usb/samsung-usbphy.txt | 12 +++
>>> drivers/usb/phy/samsung-usbphy.c | 94
>>> ++++++++++++++++++--
>>> 2 files changed, 98 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>>> b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>>> index 7b26e2d..a7b28b2 100644
>>> --- a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>>> +++ b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
>>> @@ -9,3 +9,15 @@ Required properties:
>>> - compatible : should be "samsung,exynos4210-usbphy"
>>> - reg : base physical address of the phy registers and length of memory
>>> mapped
>>> region.
>>> +
>>> +Optional properties:
>>> +- samsung,usb-phyhandle : should point to usb-phyhandle sub-node which
>>> provides
>>> + binding data to enable/disable device PHY handled
>>> by
>>> + PMU register.
>>> +
>>> + Required properties:
>>> + - compatible : should be "samsung,usbdev-phyctrl"
>>> for
>>> + DEVICE type phy.
>>> + - samsung,phyhandle-reg: base physical address of
>>> + PHY_CONTROL register in
>>> PMU.
>>> +- samsung,enable-mask : should be '1'
>>
>>
>> This should only be 1 for Exynos4210+ SoCs, right ?

Yes that's true Exynso4210+ SoCs have only single PHY for both host and device
which gets enabled by single bit.

>> S5PV210 uses bit 0 for OTG and bit1 for USB host, doesn't it ? And for
>> s3c64xx
>> it seems to be bit 16.
>>
True, S5PV210 uses two bits separately for OTG and HOST, so in that
case we would
require to set both these bits. Thanks for pointing out !!

I couldn't see device tree support for S5PV210 and S3C64xx so thought
of going for
4210+ SoCs. Better we make this more generic so that once these SoCs
are moved to
device tree we don't face any issue. Right ??

>> How about deriving this information from 'compatible' property instead ?
>>

It will definitely be good to use the compatible property to derive
such information,
Need to amend the current approach.

>> Maybe you could just encode the USB PMU registers (I assume those aren't
>> touched by anything but the usb drivers) in a regular 'reg' property in
>> an usbphy subnode. Then the driver could interpret it also with help
>> of 'compatible' property. And you could just use of_iomap(). E.g.
>>
>> usbphy@12130000 {
>> compatible = "samsung,exynos5250-usbphy";
>> reg = <0x12130000 0x100>, <0x12100000 0x100>;
>> usbphy-pmu {
>> /* USB device and host PHY_CONTROL registers */
>> reg = <0x10040704 8>;
>> };
>> };
>>

This approach seems nice.

>> Your "samsung,usb-phyhandle" approach seems over-engineered to me.
>> I might be missing something though.
>>

The idea behind using phandles for usb-phy was to get the multiple
registers (2 in PMU
and 1 in SYSREG) and program them separately as required.

>>
>>> diff --git a/drivers/usb/phy/samsung-usbphy.c
>>> b/drivers/usb/phy/samsung-usbphy.c
>>> index 5c5e1bb5..4ceabe3 100644
>>> --- a/drivers/usb/phy/samsung-usbphy.c
>>> +++ b/drivers/usb/phy/samsung-usbphy.c
>>> @@ -72,6 +72,8 @@ enum samsung_cpu_type {
>>> * @dev: The parent device supplied to the probe function
>>> * @clk: usb phy clock
>>> * @regs: usb phy register memory base
>>> + * @devctrl_reg: usb device phy-control pmu register memory base
>>
>>
>> hum, this name is not really helpful in understanding what's going
>> on here.
>>
>> Looking at arch/arm/mach-s5pv210/setup-usb-phy.c, there is only one
>> PHY_CONTROL (Power Management Unit) register for both OTG and USB host
>> PHYs. So are you really taking care of that case as well ?
>>
This doesn't take care of s3pv210. Will amend this to ensure that.

>>
>>> + * @en_mask: enable mask
>>> * @ref_clk_freq: reference clock frequency selection
>>> * @cpu_type: machine identifier
>>> */
>>> @@ -81,12 +83,73 @@ struct samsung_usbphy {
>>> struct device *dev;
>>> struct clk *clk;
>>> void __iomem *regs;
>>> + void __iomem *devctrl_reg;
>>> + u32 en_mask;
>>> int ref_clk_freq;
>>> int cpu_type;
>>> };
>>>
>>> #define phy_to_sphy(x) container_of((x), struct
>>> samsung_usbphy, phy)
>>>
>>> +static int samsung_usbphy_parse_dt_param(struct samsung_usbphy *sphy)
>>> +{
>>> + struct device_node *usb_phyctrl;
>>> + u32 reg;
>>> + int lenp;
>>> +
>>> + if (!sphy->dev->of_node) {
>>> + sphy->devctrl_reg = NULL;
>>> + return -ENODEV;
>>> + }
>>> +
>>> + if (of_get_property(sphy->dev->of_node,
>>> "samsung,usb-phyhandle",&lenp)) {
>>> + usb_phyctrl = of_parse_phandle(sphy->dev->of_node,
>>> + "samsung,usb-phyhandle",
>>> 0);
>>> + if (!usb_phyctrl) {
>>> + dev_warn(sphy->dev, "Can't get usb-phy handle\n");
>>> + sphy->devctrl_reg = NULL;
>>> + }
>>> +
>>> + of_property_read_u32(usb_phyctrl,
>>> "samsung,phyhandle-reg",&reg);
>>> +
>>> + sphy->devctrl_reg = ioremap(reg, SZ_4);
>>
>>
>> What happens if invalid address value is assigned to 'samsung,phyhandle-reg'
>> ?

Oops!! need to add an pointer check here.

>>
>>> + of_property_read_u32(sphy->dev->of_node,
>>> "samsung,enable-mask",
>>> + &sphy->en_mask);
>>> + of_node_put(usb_phyctrl);
>>> + } else {
>>> + dev_warn(sphy->dev, "Can't get usb-phy handle\n");
>>> + sphy->devctrl_reg = NULL;
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +/*
>>> + * Set isolation here for phy.
>>> + * SOCs control this by controlling corresponding PMU registers
>>> + */
>>> +static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, int
>>> on)
>>> +{
>>> + void __iomem *usb_phyctrl_reg;
>>> + u32 en_mask = sphy->en_mask;
>>> + u32 reg;
>>> +
>>> + usb_phyctrl_reg = sphy->devctrl_reg;
>>> +
>>> + if (!usb_phyctrl_reg) {
>>> + dev_warn(sphy->dev, "Can't set pmu isolation\n");
>>> + return;
>>> + }
>>> +
>>> + reg = readl(usb_phyctrl_reg);
>>> +
>>> + if (on)
>>> + writel(reg& ~en_mask, usb_phyctrl_reg);
>>>
>>> + else
>>> + writel(reg | en_mask, usb_phyctrl_reg);
>>> +}
>>> +
>>> /*
>>> * Returns reference clock frequency selection value
>>> */
>>> @@ -199,6 +262,8 @@ static int samsung_usbphy_init(struct usb_phy *phy)
>>> /* Disable phy isolation */
>>> if (sphy->plat&& sphy->plat->pmu_isolation)
>>>
>>> sphy->plat->pmu_isolation(false);
>>> + else
>>> + samsung_usbphy_set_isolation(sphy, false);
>>>
>>> /* Initialize usb phy registers */
>>> samsung_usbphy_enable(sphy);
>>> @@ -228,6 +293,8 @@ static void samsung_usbphy_shutdown(struct usb_phy
>>> *phy)
>>> /* Enable phy isolation */
>>> if (sphy->plat&& sphy->plat->pmu_isolation)
>>>
>>> sphy->plat->pmu_isolation(true);
>>> + else
>>> + samsung_usbphy_set_isolation(sphy, true);
>>>
>>> clk_disable_unprepare(sphy->clk);
>>> }
>>> @@ -249,17 +316,12 @@ static inline int
>>> samsung_usbphy_get_driver_data(struct platform_device *pdev)
>>> static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
>>> {
>>> struct samsung_usbphy *sphy;
>>> - struct samsung_usbphy_data *pdata;
>>> + struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
>>> struct device *dev =&pdev->dev;
>>>
>>> struct resource *phy_mem;
>>> void __iomem *phy_base;
>>> struct clk *clk;
>>> -
>>> - pdata = pdev->dev.platform_data;
>>> - if (!pdata) {
>>> - dev_err(&pdev->dev, "%s: no platform data defined\n",
>>> __func__);
>>> - return -EINVAL;
>>> - }
>>> + int ret;
>>>
>>> phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> if (!phy_mem) {
>>> @@ -283,7 +345,20 @@ static int __devinit samsung_usbphy_probe(struct
>>> platform_device *pdev)
>>> return PTR_ERR(clk);
>>> }
>>>
>>> - sphy->dev =&pdev->dev;
>>> + sphy->dev =&pdev->dev;
>>
>>
>> sphy->dev = dev;
>>
Right, will amend this.

>>
>>> +
>>> + ret = samsung_usbphy_parse_dt_param(sphy);
>>> + if (ret) {
>>> + /* fallback to pdata */
>>> + if (!pdata) {
>>> + dev_err(&pdev->dev,
>>> + "%s: no device data found\n", __func__);
>>
>>
>> I find term "device data" a bit confusing here.
>>
>>> + return -ENODEV;
>>
>>
>> In the original code -EINVAL was returned when platform_data was not set.
>>
>>
>>> + } else {
>>> + sphy->plat = pdata;
>>> + }
>>> + }
>>> +
>>
>>
>> How about rewriting this to:
>>
>> if (dev->of_node) {
>> ret = samsung_usbphy_parse_dt_param(sphy);
>> if (ret < 0)
>> return ret;
>> } else {
>> if (!pdata) {
>> dev_err(dev, "no platform data specified\n");
>> return -EINVAL;
>> }
>> }
>>
>> This way we won't be obfuscating any error code returned from the
>> OF parsing function.
>>
Sure, will amend this.

>>
>>> sphy->plat = pdata;
>>> sphy->regs = phy_base;
>>> sphy->clk = clk;
>>> @@ -305,6 +380,9 @@ static int __exit samsung_usbphy_remove(struct
>>> platform_device *pdev)
>>>
>>> usb_remove_phy(&sphy->phy);
>>>
>>> + if (sphy->devctrl_reg)
>>> + iounmap(sphy->devctrl_reg);
>>> +
>>> return 0;
>>> }
>>
>>
>> --
>>
>> Regards,
>> Sylwester
>>
>> _______________________________________________
>> devicetree-discuss mailing list
>> devicetree-discuss@lists.ozlabs.org
>> https://lists.ozlabs.org/listinfo/devicetree-discuss
>
>
>
> --
> Thanks & Regards
> Vivek



--
Thanks & Regards
Vivek


\
 
 \ /
  Last update: 2012-12-19 15:21    [W:0.078 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site