lkml.org 
[lkml]   [2012]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/4] ODROID-X: dts: Add board dts file for ODROID-X
From
Hi Dongjin,

On 17 December 2012 13:55, Dongjin Kim <tobetter@gmail.com> wrote:
> Add initial dtb file for Hardkernel's ODROID-X board based on EXYNOS4412 SoC.
>
> Signed-off-by: Dongjin Kim <tobetter@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos4412-odroidx.dts | 52 ++++++++++++++++++++++++++++++
> 2 files changed, 53 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index ca6fb8e..3355af9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
> exynos5250-smdk5250.dtb \
> exynos5440-ssdk5440.dtb \
> exynos4412-smdk4412.dtb \
> + exynos4412-odroidx.dtb \
> exynos5250-smdk5250.dtb \
> exynos5250-snow.dtb
> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
> new file mode 100644
> index 0000000..786ddd7
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> @@ -0,0 +1,52 @@
> +/*
> + * Hardkernel's Exynos4412 based ODROID-X board device tree source
> + *
> + * Copyright (c) 2012-2013 Dongjin Kim <tobetter@gmail.com>
> + *
> + * Device tree source file for Hardkernel's ODROID-X board which is based on
> + * Samsung's Exynos4412 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +/include/ "exynos4412.dtsi"
> +
> +/ {
> + model = "Hardkernel ODROID-X board based on Exynos4412";
> + compatible = "samsung,exynos4412";
> +
> + memory {
> + reg = <0x40000000 0x40000000>;
> + };
> +
> + chosen {
> + bootargs ="root=/dev/mmcblk0p3 rw console=ttySAC1,115200 init=/sbin/init delay=2";
> + };
> +
> + serial@13800000 {
> + status = "okay";
> + };
> +
> + serial@13810000 {
> + status = "okay";
> + };
> +
> + serial@13820000 {
> + status = "okay";
> + };
> +
> + serial@13830000 {
> + status = "okay";
> + };
> +
> + sdhci@12530000 {
> + bus-width = <4>;
> + samsung,cd-pinmux-gpio = <&gpk2 2 2 3 3>;

The card detect line should also be configured using pinctrl
interface. When pinctrl is enabled on Exynos, the old-style gpio
bindings is not supported. So a pinctrl node for sd2_cmd should be
defined which then can be listed in pinctrl-0.

> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
> + pinctrl-names = "default";
> + status = "okay";
> + };
> +};
> --
> 1.7.9.5
>


\
 
 \ /
  Last update: 2012-12-18 03:01    [W:0.051 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site