lkml.org 
[lkml]   [2012]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2][V2] cpuidle - optimize the select function for the 'menu' governor
Date
As the power is backward sorted in the states array and we are looking for
the state consuming the little power as possible, instead of looking from
the beginning of the array, we look from the end. That should save us some
iterations in the loop each time we select a state at idle time.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/cpuidle/governors/menu.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index fe343a0..05b8998 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -367,24 +367,24 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
* Find the idle state with the lowest power while satisfying
* our constraints.
*/
- for (i = CPUIDLE_DRIVER_STATE_START; i < drv->state_count; i++) {
+ for (i = drv->state_count - 1; i >= CPUIDLE_DRIVER_STATE_START; i--) {
struct cpuidle_state *s = &drv->states[i];
struct cpuidle_state_usage *su = &dev->states_usage[i];

if (s->disabled || su->disable)
continue;
- if (s->target_residency > data->predicted_us) {
- low_predicted = 1;
- continue;
- }
if (s->exit_latency > latency_req)
continue;
+ if (s->target_residency > data->predicted_us)
+ continue;
if (s->exit_latency * multiplier > data->predicted_us)
continue;

+ low_predicted = i - CPUIDLE_DRIVER_STATE_START;
data->last_state_idx = i;
data->exit_us = s->exit_latency;
- }
+ break;
+ }

/* not deepest C-state chosen for low predicted residency */
if (low_predicted) {
--
1.7.5.4


\
 
 \ /
  Last update: 2012-12-14 15:41    [W:0.239 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site