Messages in this thread Patch in this message | | | From | Lee Jones <> | Subject | [PATCH 6/8] ARM: ux500: Setup correct settling time for the MMCI regulator | Date | Thu, 13 Dec 2012 13:22:08 +0000 |
| |
The GPIO controlled MMCI regulator used on the ux5x0 boards takes 100us to settle. There's already a binding to provide such information. Let's make use of it.
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/dbx5x0.dtsi | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 88f90217..208fe8b 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -638,6 +638,7 @@ regulator-name = "mmci-reg"; regulator-type = "voltage"; + startup-delay-us = <100>; enable-active-high; states = <1800000 0x1 -- 1.7.9.5
| |