lkml.org 
[lkml]   [2012]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] arm: dts: Add uart1 and uart2 to igep boards.
Hi Matthias,

On 12/12/2012 04:33 PM, Matthias Brugger wrote:
> This patch is a follow-up patch for Javier Martinez effort adding initial
> device tree support to IGEP technology devices. [1]
>
> It adds uart1 and uart2 bindings to the generic dtsi for the IGEP boards.
>
> [1] http://www.spinics.net/lists/linux-omap/msg83409.html
>
> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
> arch/arm/boot/dts/omap3-igep.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
> index 125fe00..c02e3c0 100644
> --- a/arch/arm/boot/dts/omap3-igep.dtsi
> +++ b/arch/arm/boot/dts/omap3-igep.dtsi
> @@ -27,6 +27,20 @@
> };
>
> &omap3_pmx_core {
> + uart1_pins: pinmux_uart1_pins {
> + pinctrl-single,pins = <
> + 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */
> + 0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */
> + >;
> + };
> +
> + uart2_pins: pinmux_uart2_pins {
> + pinctrl-single,pins = <
> + 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */
> + 0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */
> + >;
> + };
> +
> uart3_pins: pinmux_uart3_pins {
> pinctrl-single,pins = <
> 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */
> @@ -77,6 +91,16 @@
> status = "disabled";
> };
>
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_pins>;
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2_pins>;
> +};
> +
> &uart3 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart3_pins>;
>

That looks good to me. I'll apply it on top of javier's series for 3.9.

Thanks,
Benoit



\
 
 \ /
  Last update: 2012-12-12 17:21    [W:0.080 / U:1.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site