lkml.org 
[lkml]   [2012]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH RFC/RFT] regulator: core: Fix continuous_voltage_range case in regulator_can_change_voltage
From
Date
Regulator drivers with continuous_voltage_range flag set allows not setting
n_voltages. Thus if continuous_voltage_range is set, check the constraint range
instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/core.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 0f65b24..d7448ad 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1885,9 +1885,15 @@ int regulator_can_change_voltage(struct regulator *regulator)
struct regulator_dev *rdev = regulator->rdev;

if (rdev->constraints &&
- rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE &&
- (rdev->desc->n_voltages - rdev->desc->linear_min_sel) > 1)
- return 1;
+ (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+ if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1)
+ return 1;
+
+ if (rdev->desc->continuous_voltage_range &&
+ rdev->constraints->min_uV && rdev->constraints->max_uV &&
+ rdev->constraints->min_uV != rdev->constraints->max_uV)
+ return 1;
+ }

return 0;
}
--
1.7.9.5




\
 
 \ /
  Last update: 2012-12-12 02:41    [W:0.061 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site