lkml.org 
[lkml]   [2012]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/4 v5] iommu/fsl: Add iommu domain attributes required by fsl PAMU driver.
On 12/10/2012 04:10:06 AM, Sethi Varun-B16395 wrote:
>
>
> > -----Original Message-----
> > From: Wood Scott-B07421
> > Sent: Tuesday, December 04, 2012 11:53 PM
> > To: Sethi Varun-B16395
> > Cc: Wood Scott-B07421; Joerg Roedel; linux-kernel@vger.kernel.org;
> > iommu@lists.linux-foundation.org; linuxppc-dev@lists.ozlabs.org;
> Tabi
> > Timur-B04825
> > Subject: Re: [PATCH 3/4 v5] iommu/fsl: Add iommu domain attributes
> > required by fsl PAMU driver.
> >
> > On 12/04/2012 05:53:33 AM, Sethi Varun-B16395 wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Wood Scott-B07421
> > > > Sent: Monday, December 03, 2012 10:34 PM
> > > > To: Sethi Varun-B16395
> > > > Cc: Joerg Roedel; linux-kernel@vger.kernel.org;
> iommu@lists.linux-
> > > > foundation.org; Wood Scott-B07421;
> linuxppc-dev@lists.ozlabs.org;
> > > Tabi
> > > > Timur-B04825
> > > > Subject: Re: [PATCH 3/4 v5] iommu/fsl: Add iommu domain
> attributes
> > > > required by fsl PAMU driver.
> > > >
> > > > On 12/03/2012 10:57:29 AM, Sethi Varun-B16395 wrote:
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: iommu-bounces@lists.linux-foundation.org
> [mailto:iommu-
> > > > > > bounces@lists.linux-foundation.org] On Behalf Of Joerg
> Roedel
> > > > > > Sent: Sunday, December 02, 2012 7:33 PM
> > > > > > To: Sethi Varun-B16395
> > > > > > Cc: linux-kernel@vger.kernel.org;
> > > iommu@lists.linux-foundation.org;
> > > > > Wood
> > > > > > Scott-B07421; linuxppc-dev@lists.ozlabs.org; Tabi
> Timur-B04825
> > > > > > Subject: Re: [PATCH 3/4 v5] iommu/fsl: Add iommu domain
> > > attributes
> > > > > > required by fsl PAMU driver.
> > > > > >
> > > > > > Hmm, we need to work out a good abstraction for this.
> > > > > >
> > > > > > On Tue, Nov 20, 2012 at 07:24:56PM +0530, Varun Sethi wrote:
> > > > > > > Added the following domain attributes required by FSL PAMU
> > > driver:
> > > > > > > 1. Subwindows field added to the iommu domain geometry
> > > attribute.
> > > > > >
> > > > > > Are the Subwindows mapped with full size or do you map only
> > > parts
> > > > > of the
> > > > > > subwindows?
> > > > > >
> > > > > [Sethi Varun-B16395] It's possible to map a part of the
> subwindow
> > > i.e.
> > > > > size of the mapping can be less than the sub window size.
> > > > >
> > > > > > > + * This attribute indicates number of DMA subwindows
> > > > supported
> > > > > by
> > > > > > > + * the geometry. If there is a single window that maps
> > > the
> > > > > entire
> > > > > > > + * geometry, attribute must be set to "1". A value of
> > > "0"
> > > > > implies
> > > > > > > + * that this mechanism is not used at all(normal paging
> > > is
> > > > > used).
> > > > > > > + * Value other than* "0" or "1" indicates the actual
> > > number
> > > > of
> > > > > > > + * subwindows.
> > > > > > > + */
> > > > > >
> > > > > > This semantic is ugly, how about a feature detection
> mechanism?
> > > > > >
> > > > > [Sethi Varun-B16395] A feature mechanism to query the type of
> > > IOMMU?
> > > >
> > > > A feature mechanism to determine whether this subwindow
> mechanism is
> > > > available, and what the limits are.
> > > >
> > > So, we use the IOMMU capability interface to find out if IOMMU
> > > supports sub windows or not, right? But still number of sub
> windows
> > > would be specified as a part of the geometry and the valid value
> for
> > > sub windows would 0,1 or actual number of sub windows.
> >
> > How does a user of the interface find out what values are possible
> for
> > the "actual number of subwindows"? How does a user of the
> interface find
> > out whether there are any limitations on specifying a value of zero
> (in
> > the case of PAMU, that would be a maximum 1 MiB naturally-aligned
> > aperture to support arbitrary 4KiB mappings)?
> How about if we say that the default value for subwindows is zero and
> this what you get when you read the geometry (iommu_get_attr) after
> initializing the domain? In that case the user would know that
> implication of setting subwindows to zero with respect to the
> aperture size.

So it would default to the maximum aperture size possible with no
subwindows? That might be OK, though is there a way to reset the
domain later on to get back to that informational state?

How about finding out the maximum number of subwindows?

> Also, should we introduce an additional API like "iommu_check_attr",
> which the user can use to validate the attribute value. For example
> in case of geometry, the user can fill up the structure and pass it
> to the iommu driver in order to verify the aperture and subwindows
> field.

Doesn't the current API raise an error if you do something
unsupported? In any case I don't think making a series of guesses and
seeing which ones are accepted is a good substitute for being able to
simply read out the relevant parameters.

-Scott


\
 
 \ /
  Last update: 2012-12-11 02:21    [W:0.108 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site