lkml.org 
[lkml]   [2012]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3 v2] iio: add rtc-driver for HID sensors of type time
On 12/10/2012 10:26 PM, Alexander Holler wrote:
> Am 10.12.2012 21:22, schrieb Lars-Peter Clausen:
>> On 12/10/2012 08:45 PM, Alexander Holler wrote:
>>> Am 10.12.2012 18:05, schrieb Lars-Peter Clausen:
>>>
>>>> Looks pretty good now. But there are still some IIO remnants which should be
>>>> removed as well. Also the driver should move to drivers/rtc/ since, well,
>>>> it's a rtc driver not a IIO driver.
>>>
>>> I think it still should be stick to iio, because that is where all HID
>>> sensors currently are found and where the user would expect to find such
>>> a driver.
>>
>> That's because all the current IIO sensor drivers fall in the IIO domain. This
>> one clearly is a RTC driver, so it belongs in drivers/rtc/
>
> Where nobody will find it if he searches for drivers for his HID sensor.
> I still see it as HID sensor driver and not a rtc-driver.
> But ...

I can understand your position, but drivers are usually grouped by function not
by topology. If there is a proper Kconfig help text people should hopefully be
find it.

>
>>
>>>
>>>>> +/* Channel definitions */
>>>>> +static const struct iio_chan_spec hid_time_channels[TIME_RTC_CHANNEL_MAX] = {
>>>
>>> And that is imho the last remaining iio-stuff. If necessary I can remove
>>> it too.
>>
>> That and the remaining bits of the read_raw callback.
>
> Ok. I will make a v3.
>

Btw. have you seen the other comments I had inline in my response to your v2?


\
 
 \ /
  Last update: 2012-12-11 02:01    [W:0.201 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site