lkml.org 
[lkml]   [2012]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [GIT TREE] Unified NUMA balancing tree, v3

* Ingo Molnar <mingo@kernel.org> wrote:

>
> * Mel Gorman <mgorman@suse.de> wrote:
>
> > On Mon, Dec 10, 2012 at 08:15:45PM +0100, Ingo Molnar wrote:
> > >
> > > * Rik van Riel <riel@redhat.com> wrote:
> > >
> > > > On 12/10/2012 01:22 PM, Thomas Gleixner wrote:
> > > >
> > > > > So autonuma and numacore are basically on the same page,
> > > > > with a slight advantage for numacore in the THP enabled
> > > > > case. balancenuma is closer to mainline than to
> > > > > autonuma/numacore.
> > > >
> > > > Indeed, when the system is fully loaded, numacore does very
> > > > well.
> > >
> > > Note that the latest (-v3) code also does well in under-loaded
> > > situations:
> > >
> > > http://lkml.org/lkml/2012/12/7/331
> > >
> > > Here's the 'perf bench numa' comparison to 'balancenuma':
> > >
> > > balancenuma | NUMA-tip
> > > [test unit] : -v10 | -v3
> > > ------------------------------------------------------------
> > > 2x1-bw-process : 6.136 | 9.647: 57.2%
> > > 3x1-bw-process : 7.250 | 14.528: 100.4%
> > > 4x1-bw-process : 6.867 | 18.903: 175.3%
> > > 8x1-bw-process : 7.974 | 26.829: 236.5%
> > > 8x1-bw-process-NOTHP : 5.937 | 22.237: 274.5%
> > > 16x1-bw-process : 5.592 | 29.294: 423.9%
> > > 4x1-bw-thread : 13.598 | 19.290: 41.9%
> > > 8x1-bw-thread : 16.356 | 26.391: 61.4%
> > > 16x1-bw-thread : 24.608 | 29.557: 20.1%
> > > 32x1-bw-thread : 25.477 | 30.232: 18.7%
> > > 2x3-bw-thread : 8.785 | 15.327: 74.5%
> > > 4x4-bw-thread : 6.366 | 27.957: 339.2%
> > > 4x6-bw-thread : 6.287 | 27.877: 343.4%
> > > 4x8-bw-thread : 5.860 | 28.439: 385.3%
> > > 4x8-bw-thread-NOTHP : 6.167 | 25.067: 306.5%
> > > 3x3-bw-thread : 8.235 | 21.560: 161.8%
> > > 5x5-bw-thread : 5.762 | 26.081: 352.6%
> > > 2x16-bw-thread : 5.920 | 23.269: 293.1%
> > > 1x32-bw-thread : 5.828 | 18.985: 225.8%
> > > numa02-bw : 29.054 | 31.431: 8.2%
> > > numa02-bw-NOTHP : 27.064 | 29.104: 7.5%
> > > numa01-bw-thread : 20.338 | 28.607: 40.7%
> > > numa01-bw-thread-NOTHP : 18.528 | 21.119: 14.0%
> > > ------------------------------------------------------------
> > >
> > > More than half of these testcases are under-loaded situations.
> > >
> > > > The main issues that have been observed with numacore are when
> > > > the system is only partially loaded. Something strange seems
> > > > to be going on that causes performance regressions in that
> > > > situation.
> > >
> > > I haven't seen such reports with -v3 yet, which is what Thomas
> > > tested. Mel has not tested -v3 yet AFAICS.
> > >
> >
> > Yes, I have. The drop I took and the results I posted to you
> > were based on a tip/master pull from December 9th. v3 was
> > released on December 7th and your release said to test based
> > on tip/master. The results are here
> > https://lkml.org/lkml/2012/12/9/108 . Look at the columns
> > marked numafix-20121209 which is tip/master with a bodge on
> > top to remove the "if (p->nr_cpus_allowed !=
> > num_online_cpus())" check.
>
> Ah, indeed - I saw those results but the 'numafix' tag threw me
> off.
>
> Looks like at least in terms of AutoNUMA-benchmark numbers you
> measured the best-ever results with the -v3 tree? That aspect
> is obviously good news.

... at least for the numa01 row. numa02 and numa01-THREAD_ALLOC
isn't as good yet in your tests.

Thanks,

Ingo


\
 
 \ /
  Last update: 2012-12-10 21:41    [W:0.231 / U:2.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site