lkml.org 
[lkml]   [2012]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/1] Input: xpad - Implement wireless controller LED setting and fix connect time LED setting
On Mon, 10 Dec 2012 02:58:25 -0800
Chris Moeller <kode54@gmail.com> wrote:

> On Sun, 2 Dec 2012 23:43:18 -0800
> Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
>
> > On Fri, Nov 30, 2012 at 08:13:29PM -0800, Chris Moeller wrote:
> > > On Fri, 30 Nov 2012 14:30:23 -0800
> > > Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> > >
> > > > Hi Chris,
> > > >
> > > > On Friday, November 30, 2012 01:54:06 PM Chris Moeller wrote:
> > > > > I've submitted versions of this with prior patch sets, and
> > > > > this part was never accepted, possibly because it depended on
> > > > > other patches to work, or possibly because it wasn't so
> > > > > cleanly organized. This time, I've split the LED setting
> > > > > command off into its own static function, then call that on
> > > > > controller connect and optionally on LED setting commands.
> > > > > The static function does not include any locking, because
> > > > > locking inside the function which receives the incoming
> > > > > packets deadlocks the driver, and does not appear to be
> > > > > necessary anyway.
> > > > >
> > > > > It also removes all traces of the original bulk out function
> > > > > which was designed for the purpose of setting the LED status
> > > > > on connect, as I found that it actually does not work at all.
> > > > > It appears to try to send the data, but nothing actually
> > > > > happens to the controller LEDs.
> > > >
> > > > Attached is a reply I sent to on 7/4/11 to which you
> > > > unfortunately never responded. The issue is that of force
> > > > feedback (rumble) and LED share the same URB then access to
> > > > that URB should be arbitrated. The attached message contains a
> > > > patch that attempts to implement that arbitration, could you
> > > > please try it out and see what changes are needed to make it
> > > > work?
> > > >
> > > > Thanks.
> > > >
> > >
> > > So sorry I missed your reply. That's what I get for filtering the
> > > mailing list messages past my inbox, then never following up on my
> > > filter/folder set for replies to my own messages. I recall you
> > > mentioned that potential race condition when I first submitted,
> > > but I forgot to do anything about it. I'm glad at least one of us
> > > has our stuff together. It seems to work just fine, but there may
> > > be a force feedback issue with the following test program, where
> > > it leaves the effect playing indefinitely after the program
> > > terminates, and then the controller itself ceases to respond until
> > > the module is removed and reloaded.
> >
> > Just to confirm, you see this problem only with the patch being
> > discussed and do not see it without it, right?
> >
>
> Yeah, the problem only happens with this patch. Here's a silly mess
> which fixes it. If you can think of a better way to handle pending
> commands outside of the IRQ, be my guest. The problem seems to be that
> it doesn't like sending further commands from inside the output irq
> callback, so further commands are not sent, and the spinlock is left
> locked or something. So it seems that it needs to be such that the
> callback merely signals when the packet has completed sending, and the
> actual queue must be handled outside of the irq, and somehow kindly
> wait for the irq to complete for each command. Unless, you know,
> there's some other way to queue up multiple commands without waiting
> on each one to complete. I know bulk out doesn't work for the LED
> setting command, at least. Anyway, here goes.

Disregard this patch, it locks up frequently. I'm working on something
else instead.


\
 
 \ /
  Last update: 2012-12-10 14:01    [W:0.053 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site