Messages in this thread Patch in this message | | | From | Lee Jones <> | Subject | [PATCH 07/12] ARM: ux500: Specify the ux5x0 MMCI regulator's on/off GPIO as high-enable | Date | Mon, 10 Dec 2012 08:55:56 +0000 |
| |
If not specified, the GPIO control bit is inverted by default i.e. low-enable and high-disable. This is not the case with the MMCI regulator, hence it will turn on during a disable and off when regulator_enable() is invoked.
Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/dbx5x0.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index bbea89a..0523681 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -638,6 +638,8 @@ regulator-name = "mmci-reg"; regulator-type = "voltage"; + enable-active-high; + states = <1800000 0x1 3300000 0x0>; -- 1.7.9.5
| |