lkml.org 
[lkml]   [2012]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND v2 1/1] percpu_rw_semaphore: reimplement to not block the readers unnecessarily
On Thu, Nov 08, 2012 at 04:41:36PM -0800, Paul E. McKenney wrote:
> On Thu, Nov 08, 2012 at 06:41:10PM -0500, Mikulas Patocka wrote:
> >
> >
> > On Thu, 8 Nov 2012, Paul E. McKenney wrote:
> >
> > > On Thu, Nov 08, 2012 at 12:07:00PM -0800, Andrew Morton wrote:
> > > > On Thu, 8 Nov 2012 14:48:49 +0100
> > > > Oleg Nesterov <oleg@redhat.com> wrote:
> > > >
> > > > > Currently the writer does msleep() plus synchronize_sched() 3 times
> > > > > to acquire/release the semaphore, and during this time the readers
> > > > > are blocked completely. Even if the "write" section was not actually
> > > > > started or if it was already finished.
> > > > >
> > > > > With this patch down_write/up_write does synchronize_sched() twice
> > > > > and down_read/up_read are still possible during this time, just they
> > > > > use the slow path.
> > > > >
> > > > > percpu_down_write() first forces the readers to use rw_semaphore and
> > > > > increment the "slow" counter to take the lock for reading, then it
> > > > > takes that rw_semaphore for writing and blocks the readers.
> > > > >
> > > > > Also. With this patch the code relies on the documented behaviour of
> > > > > synchronize_sched(), it doesn't try to pair synchronize_sched() with
> > > > > barrier.
> > > > >
> > > > > ...
> > > > >
> > > > > include/linux/percpu-rwsem.h | 83 +++++------------------------
> > > > > lib/Makefile | 2 +-
> > > > > lib/percpu-rwsem.c | 123 ++++++++++++++++++++++++++++++++++++++++++
> > > >
> > > > The patch also uninlines everything.
> > > >
> > > > And it didn't export the resulting symbols to modules, so it isn't an
> > > > equivalent. We can export thing later if needed I guess.
> > > >
> > > > It adds percpu-rwsem.o to lib-y, so the CONFIG_BLOCK=n kernel will
> > > > avoid including the code altogether, methinks?
> > > >
> > > > >
> > > > > ...
> > > > >
> > > > > --- /dev/null
> > > > > +++ b/lib/percpu-rwsem.c
> > > > > @@ -0,0 +1,123 @@
> > > >
> > > > That was nice and terse ;)
> > > >
> > > > > +#include <linux/percpu-rwsem.h>
> > > > > +#include <linux/rcupdate.h>
> > > > > +#include <linux/sched.h>
> > > >
> > > > This list is nowhere near sufficient to support this file's
> > > > requirements. atomic.h, percpu.h, rwsem.h, wait.h, errno.h and plenty
> > > > more. IOW, if it compiles, it was sheer luck.
> > > >
> > > > > +int percpu_init_rwsem(struct percpu_rw_semaphore *brw)
> > > > > +{
> > > > > + brw->fast_read_ctr = alloc_percpu(int);
> > > > > + if (unlikely(!brw->fast_read_ctr))
> > > > > + return -ENOMEM;
> > > > > +
> > > > > + mutex_init(&brw->writer_mutex);
> > > > > + init_rwsem(&brw->rw_sem);
> > > > > + atomic_set(&brw->slow_read_ctr, 0);
> > > > > + init_waitqueue_head(&brw->write_waitq);
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +void percpu_free_rwsem(struct percpu_rw_semaphore *brw)
> > > > > +{
> > > > > + free_percpu(brw->fast_read_ctr);
> > > > > + brw->fast_read_ctr = NULL; /* catch use after free bugs */
> > > > > +}
> > > > > +
> > > > > +static bool update_fast_ctr(struct percpu_rw_semaphore *brw, unsigned int val)
> > > > > +{
> > > > > + bool success = false;
> > > > > +
> > > > > + preempt_disable();
> > > > > + if (likely(!mutex_is_locked(&brw->writer_mutex))) {
> > > > > + __this_cpu_add(*brw->fast_read_ctr, val);
> > > > > + success = true;
> > > > > + }
> > > > > + preempt_enable();
> > > > > +
> > > > > + return success;
> > > > > +}
> > > > > +
> > > > > +/*
> > > > > + * Like the normal down_read() this is not recursive, the writer can
> > > > > + * come after the first percpu_down_read() and create the deadlock.
> > > > > + */
> > > > > +void percpu_down_read(struct percpu_rw_semaphore *brw)
> > > > > +{
> > > > > + if (likely(update_fast_ctr(brw, +1)))
> > > > > + return;
> > > > > +
> > > > > + down_read(&brw->rw_sem);
> > > > > + atomic_inc(&brw->slow_read_ctr);
> > > > > + up_read(&brw->rw_sem);
> > > > > +}
> > > > > +
> > > > > +void percpu_up_read(struct percpu_rw_semaphore *brw)
> > > > > +{
> > > > > + if (likely(update_fast_ctr(brw, -1)))
> > > > > + return;
> > > > > +
> > > > > + /* false-positive is possible but harmless */
> > > > > + if (atomic_dec_and_test(&brw->slow_read_ctr))
> > > > > + wake_up_all(&brw->write_waitq);
> > > > > +}
> > > > > +
> > > > > +static int clear_fast_ctr(struct percpu_rw_semaphore *brw)
> > > > > +{
> > > > > + unsigned int sum = 0;
> > > > > + int cpu;
> > > > > +
> > > > > + for_each_possible_cpu(cpu) {
> > > > > + sum += per_cpu(*brw->fast_read_ctr, cpu);
> > > > > + per_cpu(*brw->fast_read_ctr, cpu) = 0;
> > > > > + }
> > > > > +
> > > > > + return sum;
> > > > > +}
> > > > > +
> > > > > +/*
> > > > > + * A writer takes ->writer_mutex to exclude other writers and to force the
> > > > > + * readers to switch to the slow mode, note the mutex_is_locked() check in
> > > > > + * update_fast_ctr().
> > > > > + *
> > > > > + * After that the readers can only inc/dec the slow ->slow_read_ctr counter,
> > > > > + * ->fast_read_ctr is stable. Once the writer moves its sum into the slow
> > > > > + * counter it represents the number of active readers.
> > > > > + *
> > > > > + * Finally the writer takes ->rw_sem for writing and blocks the new readers,
> > > > > + * then waits until the slow counter becomes zero.
> > > > > + */
> > > >
> > > > Some overview of how fast/slow_read_ctr are supposed to work would be
> > > > useful. This comment seems to assume that the reader already knew
> > > > that.
> > > >
> > > > > +void percpu_down_write(struct percpu_rw_semaphore *brw)
> > > > > +{
> > > > > + /* also blocks update_fast_ctr() which checks mutex_is_locked() */
> > > > > + mutex_lock(&brw->writer_mutex);
> > > > > +
> > > > > + /*
> > > > > + * 1. Ensures mutex_is_locked() is visible to any down_read/up_read
> > > > > + * so that update_fast_ctr() can't succeed.
> > > > > + *
> > > > > + * 2. Ensures we see the result of every previous this_cpu_add() in
> > > > > + * update_fast_ctr().
> > > > > + *
> > > > > + * 3. Ensures that if any reader has exited its critical section via
> > > > > + * fast-path, it executes a full memory barrier before we return.
> > > > > + */
> > > > > + synchronize_sched();
> > > >
> > > > Here's where I get horridly confused. Your patch completely deRCUifies
> > > > this code, yes? Yet here we're using an RCU primitive. And we seem to
> > > > be using it not as an RCU primitive but as a handy thing which happens
> > > > to have desirable side-effects. But the implementation of
> > > > synchronize_sched() differs considerably according to which rcu
> > > > flavor-of-the-minute you're using.
> > >
> > > The trick is that the preempt_disable() call in update_fast_ctr()
> > > acts as an RCU read-side critical section WRT synchronize_sched().
> > >
> > > The algorithm would work given rcu_read_lock()/rcu_read_unlock() and
> > > synchronize_rcu() in place of preempt_disable()/preempt_enable() and
> > > synchronize_sched(). The real-time guys would prefer the change
> > > to rcu_read_lock()/rcu_read_unlock() and synchronize_rcu(), now that
> > > you mention it.
> > >
> > > Oleg, Mikulas, any reason not to move to rcu_read_lock()/rcu_read_unlock()
> > > and synchronize_rcu()?
> >
> > preempt_disable/preempt_enable is faster than
> > rcu_read_lock/rcu_read_unlock for preemptive kernels.
>
> Significantly faster in this case? Can you measure the difference
> from a user-mode test?
>
> Hmmm. I have been avoiding moving the preemptible-RCU state from
> task_struct to thread_info, but if the difference really matters,
> perhaps that needs to be done.

Actually, the fact that __this_cpu_add() will malfunction on some
architectures is preemption is not disabled seems a more compelling
reason to keep preempt_enable() than any performance improvement. ;-)

Thanx, Paul

> > Regarding real-time response - the region blocked with
> > preempt_disable/preempt_enable contains a few instructions (one test for
> > mutex_is_locked and one increment of percpu variable), so it isn't any
> > threat to real time response. There are plenty of longer regions in the
> > kernel that are executed with interrupts or preemption disabled.
>
> Careful. The real-time guys might take the same every-little-bit approach
> to latency that you seem to be taking for CPU cycles. ;-)
>
> Thanx, Paul
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>



\
 
 \ /
  Last update: 2012-11-09 05:01    [W:0.107 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site