lkml.org 
[lkml]   [2012]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/5] clk: Add support for fundamental zynq clks
One note below:

On Wed, Oct 31, 2012 at 12:58:52PM -0600, Josh Cartwright wrote:
> Provide simplified models for the necessary clocks on the zynq-7000
> platform. Currently, the PLLs, the CPU clock network, and the basic
> peripheral clock networks (for SDIO, SMC, SPI, QSPI, UART) are modelled.
>
> OF bindings are also provided and documented.
>
> Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
> ---
> .../devicetree/bindings/clock/zynq-7000.txt | 55 +++
> drivers/clk/clk-zynq.c | 383 +++++++++++++++++++++
> include/linux/clk/zynq.h | 24 ++
> 3 files changed, 462 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/zynq-7000.txt
> create mode 100644 drivers/clk/clk-zynq.c
> create mode 100644 include/linux/clk/zynq.h
>
> diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt
> new file mode 100644
> index 0000000..23ae1db
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt
> @@ -0,0 +1,55 @@
> +Device Tree Clock bindings for the Zynq 7000 EPP
> +
> +The Zynq EPP has several different clk providers, each with there own bindings.
> +The purpose of this document is to document their usage.
> +
> +See clock_bindings.txt for more information on the generic clock bindings.
> +See Chapter 25 of Zynq TRM for more information about Zynq clocks.
> +
> +== PLLs ==
> +
> +Used to describe the ARM_PLL, DDR_PLL, and IO_PLL.
> +
> +Required properties:
> +- #clock-cells : shall be 0 (only one clock is output from this node)
> +- compatible : "xlnx,zynq-pll"
> +- reg : pair of u32 values, which are the address offsets within the SLCR
> + of the relevant PLL_CTRL register and PLL_CFG register respectively
> +- clocks : phandle for parent clock. should be the phandle for ps_clk
> +
> +Optional properties:
> +- clock-output-names : name of the output clock
> +
> +Example:
> + armpll: armpll {
> + #clock-cells = <0>;
> + compatible = "xlnx,zynq-pll";
> + clocks = <&ps_clk>;
> + reg = <0x100 0x110>;
> + clock-output-names = "armpll";
> + };
> +
> +== Peripheral clocks ==
> +
> +Describes clock node for the SDIO, SMC, SPI, QSPI, and UART clocks.
> +
> +Required properties:
> +- #clock-cells : shall be 1
> +- compatible : "xlnx,zynq-periph-clock"
> +- reg : a single u32 value, describing the offset within the SLCR where
> + the CLK_CTRL register is found for this peripheral
> +- clocks : phandle for parent clocks. should hold phandles for
> + the IO_PLL, ARM_PLL, and DDR_PLL in order
> +- clock-output-names : names of the output clock(s). For peripherals that have
> + two output clocks (for example, the UART), two clocks
> + should be listed.
> +
> +Example:
> + uart_clk: uart_clk {
> + #clock-cells = <1>;
> + compatible = "xlnx,zynq-periph-clock";
> + clocks = <&iopll &armpll &ddrpll>;
> + reg = <0x154>;
> + clock-output-names = "uart0_ref_clk",
> + "uart1_ref_clk";
> + };
> diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c
> new file mode 100644
> index 0000000..de8b586
> --- /dev/null
> +++ b/drivers/clk/clk-zynq.c
> @@ -0,0 +1,383 @@
> +/*
> + * Copyright (c) 2012 National Instruments
> + *
> + * Josh Cartwright <josh.cartwright@ni.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +#include <linux/kernel.h>
> +#include <linux/clk-provider.h>
> +
> +static void __iomem *slcr_base;
> +
> +struct zynq_pll_clk {
> + struct clk_hw hw;
> + void __iomem *pll_ctrl;
> + void __iomem *pll_cfg;
> +};
> +
> +#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw)
> +
> +#define CTRL_PLL_FDIV(x) ((x) >> 12)
> +
> +static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct zynq_pll_clk *pll = to_zynq_pll_clk(hw);
> + return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl));
> +}
> +
> +static const struct clk_ops zynq_pll_clk_ops = {
> + .recalc_rate = zynq_pll_recalc_rate,
> +};
> +
> +static void __init zynq_pll_clk_setup(struct device_node *np)
> +{
> + struct clk_init_data init;
> + struct zynq_pll_clk *pll;
> + const char *parent_name;
> + struct clk *clk;
> + u32 regs[2];
> + int ret;
> +
> + ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs));
> + if (WARN_ON(ret))
> + return;
> +
> + pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> + if (WARN_ON(!pll))
> + return;
> +
> + pll->pll_ctrl = slcr_base + regs[0];
> + pll->pll_cfg = slcr_base + regs[1];
> +
> + of_property_read_string(np, "clock-output-names", &init.name);
> +
> + init.ops = &zynq_pll_clk_ops;
> + parent_name = of_clk_get_parent_name(np, 0);
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> +
> + pll->hw.init = &init;
> +
> + clk = clk_register(NULL, &pll->hw);
> + if (WARN_ON(IS_ERR(clk)))
> + return;
> +
> + ret = of_clk_add_provider(np, of_clk_src_simple_get, clk);
> + if (WARN_ON(ret))
> + return;
> +}
> +
> +struct zynq_periph_clk {
> + struct clk_hw hw;
> + struct clk_onecell_data onecell_data;
> + struct clk *gates[2];
> + void __iomem *clk_ctrl;
> + spinlock_t clkact_lock;
> +};
> +
> +#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw)
> +
> +static const u8 periph_clk_parent_map[] = {
> + 0, 0, 1, 2
> +};
> +#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 3) >> 4])
I think this should be:
#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4])

> +#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
> +
> +static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct zynq_periph_clk *periph = to_zynq_periph_clk(hw);
> + return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl));
> +}
> +
> +static u8 zynq_periph_get_parent(struct clk_hw *hw)
> +{
> + struct zynq_periph_clk *periph = to_zynq_periph_clk(hw);
> + return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl));
> +}
> +
> +static const struct clk_ops zynq_periph_clk_ops = {
> + .recalc_rate = zynq_periph_recalc_rate,
> + .get_parent = zynq_periph_get_parent,
> +};
> +
> +static void __init zynq_periph_clk_setup(struct device_node *np)
> +{
> + struct zynq_periph_clk *periph;
> + const char *parent_names[3];
> + struct clk_init_data init;
> + int clk_num = 0, err;
> + const char *name;
> + struct clk *clk;
> + u32 reg;
> + int i;
> +
> + err = of_property_read_u32(np, "reg", &reg);
> + if (WARN_ON(err))
> + return;
> +
> + periph = kzalloc(sizeof(*periph), GFP_KERNEL);
> + if (WARN_ON(!periph))
> + return;
> +
> + periph->clk_ctrl = slcr_base + reg;
> + spin_lock_init(&periph->clkact_lock);
> +
> + init.name = np->name;
> + init.ops = &zynq_periph_clk_ops;
> + for (i = 0; i < ARRAY_SIZE(parent_names); i++)
> + parent_names[i] = of_clk_get_parent_name(np, i);
> + init.parent_names = parent_names;
> + init.num_parents = ARRAY_SIZE(parent_names);
> +
> + periph->hw.init = &init;
> +
> + clk = clk_register(NULL, &periph->hw);
> + if (WARN_ON(IS_ERR(clk)))
> + return;
> +
> + err = of_clk_add_provider(np, of_clk_src_simple_get, clk);
> + if (WARN_ON(err))
> + return;
> +
> + err = of_property_read_string_index(np, "clock-output-names", 0,
> + &name);
> + if (WARN_ON(err))
> + return;
> +
> + periph->gates[0] = clk_register_gate(NULL, name, np->name, 0,
> + periph->clk_ctrl, 0, 0,
> + &periph->clkact_lock);
> + if (WARN_ON(IS_ERR(periph->gates[0])))
> + return;
> + clk_num++;
> +
> + /* some periph clks have 2 downstream gates */
> + err = of_property_read_string_index(np, "clock-output-names", 1,
> + &name);
> + if (err != -ENODATA) {
> + periph->gates[1] = clk_register_gate(NULL, name, np->name, 0,
> + periph->clk_ctrl, 1, 0,
> + &periph->clkact_lock);
> + if (WARN_ON(IS_ERR(periph->gates[1])))
> + return;
> + clk_num++;
> + }
> +
> + periph->onecell_data.clks = periph->gates;
> + periph->onecell_data.clk_num = clk_num;
> +
> + err = of_clk_add_provider(np, of_clk_src_onecell_get,
> + &periph->onecell_data);
> + if (WARN_ON(err))
> + return;
> +}
> +
> +/* CPU Clock domain is modelled as a mux with 4 children subclks, whose
> + * derivative rates depend on CLK_621_TRUE
> + */
> +
> +struct zynq_cpu_clk {
> + struct clk_hw hw;
> + struct clk_onecell_data onecell_data;
> + struct clk *subclks[4];
> + void __iomem *clk_ctrl;
> + spinlock_t clkact_lock;
> +};
> +
> +#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw)
> +
> +static const u8 zynq_cpu_clk_parent_map[] = {
> + 1, 1, 2, 0
> +};
> +#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)])
> +#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8)
> +
> +static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw)
> +{
> + struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw);
> + return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl));
> +}
> +
> +static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw);
> + return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl));
> +}
> +
> +static const struct clk_ops zynq_cpu_clk_ops = {
> + .get_parent = zynq_cpu_clk_get_parent,
> + .recalc_rate = zynq_cpu_clk_recalc_rate,
> +};
> +
> +struct zynq_cpu_subclk {
> + struct clk_hw hw;
> + void __iomem *clk_621;
> + enum {
> + CPU_SUBCLK_6X4X,
> + CPU_SUBCLK_3X2X,
> + CPU_SUBCLK_2X,
> + CPU_SUBCLK_1X,
> + } which;
> +};
> +
> +#define CLK_621_TRUE(x) ((x) & 1)
> +
> +#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw);
> +
> +static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + unsigned long uninitialized_var(rate);
> + struct zynq_cpu_subclk *subclk;
> + bool is_621;
> +
> + subclk = to_zynq_cpu_subclk(hw)
> + is_621 = CLK_621_TRUE(ioread32(subclk->clk_621));
> +
> + switch (subclk->which) {
> + case CPU_SUBCLK_6X4X:
> + rate = parent_rate;
> + break;
> + case CPU_SUBCLK_3X2X:
> + rate = parent_rate / 2;
> + break;
> + case CPU_SUBCLK_2X:
> + rate = parent_rate / (is_621 ? 3 : 2);
> + break;
> + case CPU_SUBCLK_1X:
> + rate = parent_rate / (is_621 ? 6 : 4);
> + break;
> + };
> +
> + return rate;
> +}
> +
> +static const struct clk_ops zynq_cpu_subclk_ops = {
> + .recalc_rate = zynq_cpu_subclk_recalc_rate,
> +};
> +
> +static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which,
> + void __iomem *clk_621)
> +{
> + struct zynq_cpu_subclk *subclk;
> + struct clk_init_data init;
> + struct clk *clk;
> + int err;
> +
> + err = of_property_read_string_index(np, "clock-output-names",
> + which, &init.name);
> + if (WARN_ON(err))
> + goto err_read_output_name;
> +
> + subclk = kzalloc(sizeof(*subclk), GFP_KERNEL);
> + if (!subclk)
> + goto err_subclk_alloc;
> +
> + subclk->clk_621 = clk_621;
> + subclk->which = which;
> +
> + init.ops = &zynq_cpu_subclk_ops;
> + init.parent_names = &np->name;
> + init.num_parents = 1;
> +
> + subclk->hw.init = &init;
> +
> + clk = clk_register(NULL, &subclk->hw);
> + if (WARN_ON(IS_ERR(clk)))
> + goto err_clk_register;
> +
> + return clk;
> +
> +err_clk_register:
> + kfree(subclk);
> +err_subclk_alloc:
> +err_read_output_name:
> + return ERR_PTR(-EINVAL);
> +}
> +
> +static void __init zynq_cpu_clk_setup(struct device_node *np)
> +{
> + struct zynq_cpu_clk *cpuclk;
> + const char *parent_names[3];
> + struct clk_init_data init;
> + void __iomem *clk_621;
> + struct clk *clk;
> + u32 reg[2];
> + int err;
> + int i;
> +
> + err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg));
> + if (WARN_ON(err))
> + return;
> +
> + cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL);
> + if (WARN_ON(!cpuclk))
> + return;
> +
> + cpuclk->clk_ctrl = slcr_base + reg[0];
> + clk_621 = slcr_base + reg[1];
> + spin_lock_init(&cpuclk->clkact_lock);
> +
> + init.name = np->name;
> + init.ops = &zynq_cpu_clk_ops;
> + for (i = 0; i < ARRAY_SIZE(parent_names); i++)
> + parent_names[i] = of_clk_get_parent_name(np, i);
> + init.parent_names = parent_names;
> + init.num_parents = ARRAY_SIZE(parent_names);
> +
> + cpuclk->hw.init = &init;
> +
> + clk = clk_register(NULL, &cpuclk->hw);
> + if (WARN_ON(IS_ERR(clk)))
> + return;
> +
> + err = of_clk_add_provider(np, of_clk_src_simple_get, clk);
> + if (WARN_ON(err))
> + return;
> +
> + for (i = 0; i < 4; i++) {
> + cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621);
> + if (WARN_ON(IS_ERR(cpuclk->subclks[i])))
> + return;
> + }
> +
> + cpuclk->onecell_data.clks = cpuclk->subclks;
> + cpuclk->onecell_data.clk_num = i;
> +
> + err = of_clk_add_provider(np, of_clk_src_onecell_get,
> + &cpuclk->onecell_data);
> + if (WARN_ON(err))
> + return;
> +}
> +
> +static const __initconst struct of_device_id zynq_clk_match[] = {
> + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
> + { .compatible = "xlnx,zynq-pll", .data = zynq_pll_clk_setup, },
> + { .compatible = "xlnx,zynq-periph-clock",
> + .data = zynq_periph_clk_setup, },
> + { .compatible = "xlnx,zynq-cpu-clock", .data = zynq_cpu_clk_setup, },
> + {}
> +};
> +
> +void __init xilinx_zynq_clocks_init(void __iomem *slcr)
> +{
> + slcr_base = slcr;
> + of_clk_init(zynq_clk_match);
> +}
> diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h
> new file mode 100644
> index 0000000..56be7cd
> --- /dev/null
> +++ b/include/linux/clk/zynq.h
> @@ -0,0 +1,24 @@
> +/*
> + * Copyright (C) 2012 National Instruments
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#ifndef __LINUX_CLK_ZYNQ_H_
> +#define __LINUX_CLK_ZYNQ_H_
> +
> +void __init xilinx_zynq_clocks_init(void __iomem *slcr);
> +
> +#endif
> --
> 1.8.0


Soren




\
 
 \ /
  Last update: 2012-11-09 00:41    [W:0.143 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site