lkml.org 
[lkml]   [2012]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] pci/runtime-pm: respect devices autosuspend timeout on config access
Date
So I've been adding runtime pm to nouveau/radeon, and on X start it does a
lot of pci accesses. Now because the pm on these devices is equivalent
to D3cold, we have to resume them which involves a heavy latency due to
POSTing the cards. The driver configures the autosuspend timeout to 5s for
this reason, and I think the PCI layer config accesses should respect
the autosuspend.

Cc: Huang Ying <ying.huang@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
drivers/pci/pci-sysfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 02d107b..12d3d52 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -487,7 +487,7 @@ pci_config_pm_runtime_put(struct pci_dev *pdev)
struct device *dev = &pdev->dev;
struct device *parent = dev->parent;

- pm_runtime_put(dev);
+ pm_runtime_put_autosuspend(dev);
if (parent)
pm_runtime_put_sync(parent);
}
--
1.7.12.1


\
 
 \ /
  Last update: 2012-11-07 07:21    [W:0.033 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site