lkml.org 
[lkml]   [2012]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/3] spi / ACPI: add ACPI enumeration support
On Tue, Nov 6, 2012 at 6:43 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Monday, November 05, 2012 09:54:42 AM Bjorn Helgaas wrote:
>> On Mon, Nov 5, 2012 at 3:31 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>> > On Saturday, November 03, 2012 09:59:28 PM Rafael J. Wysocki wrote:
>> >> On Saturday, November 03, 2012 10:13:10 PM Mika Westerberg wrote:
>> >> > On Sat, Nov 03, 2012 at 01:42:02PM -0600, Bjorn Helgaas wrote:
>> >> > > On Sat, Nov 3, 2012 at 1:46 AM, Mika Westerberg
>> >> > > <mika.westerberg@linux.intel.com> wrote:
>> >> > > > ACPI 5 introduced SPISerialBus resource that allows us to enumerate and
>> >> > > > configure the SPI slave devices behind the SPI controller. This patch adds
>> >> > > > support for this to the SPI core.
>> > [...]
>> >> > And if the ACPI core parses the _CRS, how does it pass all the resources to
>> >> > the drivers?
>> >>
>> >> Pretty much the same way the $subject patch does.
>> >>
>> >> Instead of parsing the entire subtree below an SPI controller and trying
>> >> acpi_spi_add_device() for each device node in there, it could call
>> >> acpi_spi_add_device() whenever it finds a device of type
>> >> ACPI_RESOURCE_TYPE_SERIAL_BUS/ACPI_RESOURCE_SERIAL_TYPE_SPI.
>> >> The only problem is how to pass "master" to it.
>> >>
>> >> So Bjorn, do you have any idea how we could pass the "master" pointer from the
>> >> ACPI core to acpi_spi_add_device() in a sensible way?
>> >>
>> >> An alternative might be to store the information obtained from _CRS in
>> >> struct acpi_device objects created by the ACPI core while parsing the
>> >> namespace. We do that already for things like _PRW, so we might as well do it
>> >> for _CRS. Then, the SPI core could just walk the subtree of the device hierarchy
>> >> below the SPI controller's acpi_device to extract that information.
>> >> Maybe that's the way to go?
>> >
>> > The general idea is to move the _CRS parsing routine from acpi_platform.c
>> > to scan.c and make it attach resource objects to struct acpi_device.
>> >
>> > I'm thinking about adding a list head to struct acpi_device pointing to a
>> > list of entries like:
>> >
>> > struct resource_list_entry {
>> > struct list_head node;
>> > struct resource *resources;
>> > unsigned int count;
>> > };
>> >
>> > where "resources" is an array of resources (e.g. interrupts) in the given
>> > entry and count is the size of that array.
>> >
>> > That list would contain common resources like ACPI_RESOURCE_TYPE_FIXED_MEMORY32,
>> > ACPI_RESOURCE_TYPE_IRQ, ACPI_RESOURCE_TYPE_ADDRESS32, ACPI_RESOURCE_TYPE_EXTENDED_IRQ.
>>
>> This is exactly what PNPACPI already does. For every Device node in
>> the namespace, pnpacpi/rsparser.c parses _CRS and builds a list of
>> struct resources that correspond to it. If you put this functionality
>> in acpi/scan.c, should we get rid of PNPACPI?
>
> Quite likely. At least this part of it, if you want the core to parse
> resources.
>
> That said, I actually tried to abstract out resource parsing in a more generic
> fashion on the basis of our new platform device support code, but quite frankly
> I wasn't able to.
>
> The problem is that struct resource is too simple to be useful for representing
> all of the information that can be encoded in ACPI resources. As a result, some
> information have to be stored directly in things like struct pnp_dev, struct
> platform_device etc. and if we want to represent it generically, the only way
> to do that seems to be using the ACPICA resource types as defined in acrestyp.h.

Really? I didn't have that impression. It might be that the new GPIO
and SERIAL_BUS stuff makes it too complicated for a struct resource,
but prior to that, I don't think it was. It's true that there are
many different formats (IO, FIXED_IO, MEMORY24, MEMORY32, etc.), but
only the core needs to be aware of the encoding of all those formats.
As far as a *driver* is concerned, there are only IRQ, DMA, IO, and
MEM resources, and those fit easily in a struct resource.

I want to expand on what I said before about _CRS being the domain of
the core, not drivers. The core must evaluate _CRS to know where
devices are and avoid conflicts when assigning resources. The core
must evaluate _PRS and _SRS when making resource assignments. It
doesn't make sense for drivers to be using _PRS and _SRS; they don't
have a global view of resources, and any assignment they make would
likely cause conflicts with other devices. I think it makes sense to
consolidate all _CRS, _PRS, and _SRS management in the core rather
than splitting it up. This is exactly analogous to PCI BAR
management, and we don't intend drivers to read and write BARs
directly.

Bjorn


\
 
 \ /
  Last update: 2012-11-06 22:21    [W:0.102 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site