lkml.org 
[lkml]   [2012]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 043/104] drivers/cpufreq: remove depends on CONFIG_EXPERIMENTAL
Date
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
drivers/cpufreq/Kconfig.arm | 4 ++--
drivers/cpufreq/Kconfig.x86 | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 5961e64..b63c335 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -21,8 +21,8 @@ config ARM_S3C2416_CPUFREQ
If in doubt, say N.

config ARM_S3C2416_CPUFREQ_VCORESCALE
- bool "Allow voltage scaling for S3C2416 arm core (EXPERIMENTAL)"
- depends on ARM_S3C2416_CPUFREQ && REGULATOR && EXPERIMENTAL
+ bool "Allow voltage scaling for S3C2416 arm core"
+ depends on ARM_S3C2416_CPUFREQ && REGULATOR
help
Enable CPU voltage scaling when entering the dvs mode.
It uses information gathered through existing hardware and
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index 934854a..0715d8e 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -174,7 +174,7 @@ config X86_SPEEDSTEP_ICH
config X86_SPEEDSTEP_SMI
tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
select CPU_FREQ_TABLE
- depends on X86_32 && EXPERIMENTAL
+ depends on X86_32
help
This adds the CPUFreq driver for certain mobile Intel Pentium III
(Coppermine), all mobile Intel Pentium III-M (Tualatin)
@@ -206,7 +206,7 @@ config X86_P4_CLOCKMOD

config X86_CPUFREQ_NFORCE2
tristate "nVidia nForce2 FSB changing"
- depends on X86_32 && EXPERIMENTAL
+ depends on X86_32
help
This adds the CPUFreq driver for FSB changing on nVidia nForce2
platforms.
@@ -242,7 +242,7 @@ config X86_LONGHAUL
config X86_E_POWERSAVER
tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)"
select CPU_FREQ_TABLE
- depends on X86_32 && EXPERIMENTAL
+ depends on X86_32
help
This adds the CPUFreq driver for VIA C7 processors. However, this driver
does not have any safeguards to prevent operating the CPU out of spec
--
1.7.9.5


\
 
 \ /
  Last update: 2012-11-06 02:23    [W:0.382 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site