lkml.org 
[lkml]   [2012]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] spi / ACPI: add ACPI enumeration support
On Mon, 5 Nov 2012 14:02:19 +0200, Mika Westerberg wrote:
> On Mon, Nov 05, 2012 at 11:56:39AM +0100, Mark Brown wrote:
> > I've got practical systems where there are multiple buses physically
> > connected, though in practice almost always only one is actually used at
> > runtime when it's I2C and SPI there are some systems (usually with other
> > buses) where you might want to use more than one bus. Not sure those
> > buses will fit in here though.
>
> Yeah, I just went through DSDT table of one of our machines and found a
> device that actually has two I2CSerialBus connectors (and those are to the
> same controller). What I'm not sure is that is it used to select between
> two different addresses or doest the device really have two physical I2C
> connections.

Neither would make sense from a hardware perspective.

--
Jean Delvare


\
 
 \ /
  Last update: 2012-11-05 14:01    [W:0.095 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site