lkml.org 
[lkml]   [2012]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 4/8] ARM: zynq: dts: split up device tree
From
2012/10/31 Josh Cartwright <josh.cartwright@ni.com>:
> The purpose of the created zynq-7000.dtsi file is to describe the
> hardware common to all Zynq 7000-based boards. Also, get rid of the
> zynq-ep107 device tree, since it is not hardware anyone can purchase.
>
> Add a zc702 dts file based on the zynq-7000.dtsi. Add it to the
> dts/Makefile so it is built with the 'dtbs' target.
>
> Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/{zynq-ep107.dts => zynq-7000.dtsi} | 19 +++-----------
> arch/arm/boot/dts/zynq-zc702.dts | 30 ++++++++++++++++++++++
> arch/arm/mach-zynq/common.c | 3 ++-
> 4 files changed, 36 insertions(+), 17 deletions(-)
> rename arch/arm/boot/dts/{zynq-ep107.dts => zynq-7000.dtsi} (79%)
> create mode 100644 arch/arm/boot/dts/zynq-zc702.dts

Not going to apply this. We need to finish our discussion in
"[PATCH v4 1/5] zynq: use GIC device tree bindings" before.

Definitely I like idea to use "xlnx,zynq-7000" generic model name.

Thanks,
Michal


\
 
 \ /
  Last update: 2012-11-05 13:02    [W:0.212 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site