lkml.org 
[lkml]   [2012]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] add hardware I2C support for ARM IMX23
> You might want to try my for-next branch or wait for 3.8-rc1, maybe
the
> DMA termination patch helps? Also enabling I2C debug messages is
> probably worth it.
>
> Regards,
>
> Wolfram
>
> --
> Pengutronix e.K. | Wolfram Sang
|
> Industrial Linux Solutions |
http://www.pengutronix.de/ |
>

I've tested your git tree, with the same config as I used for the
3.7.0-rc6 release (IMX i2c build in)
It's not a 100% fix

If I do "i2cdetect -y -r 0" with 3.7.0-rc6, i2cdetect gets confused
and the kernel keeps dumping "mxs-i2c 80058000.i2c: Failed to get PIO
reg. write descriptor."
If I do the same with your git release I get the same result, but only
when i2cdetect is running. When it's finished or I terminate, the
kprint will also disappear.
So there is some improvement but not 100% yet.




\
 
 \ /
  Last update: 2012-11-30 18:21    [W:0.051 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site