Messages in this thread | | | Date | Fri, 30 Nov 2012 16:23:30 +0100 (CET) | From | Jiri Kosina <> | Subject | Re: [PATCH] smsc: RFC: Workaround for problems with lan8710 phy auto MDI-X |
| |
On Fri, 30 Nov 2012, Peter Turczak wrote:
> while debugging network outages on a customers hardware I found, that > the MDI-X function of the lan8710 phy seemed to cause trouble. When > connecting to almost any kind of 100/1000MBit switch, the link would > seem to come up and data where sent out to the network. But all incoming > packets got lost somehow. This is quite bad, as the system runs from > nfsroot while booting up during development. > > When I disabled the auto MDI-X function of the phy the problem went away. > > Signed-off-by: Peter Turczak <pt@netconsequence.de> > --- > drivers/net/phy/Kconfig | 10 ++++++++++ > drivers/net/phy/smsc.c | 15 +++++++++++++++ > include/linux/smscphy.h | 5 +++++ > 3 files changed, 30 insertions(+), 0 deletions(-) > > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig > index 961f0b2..341f5aa 100644 > --- a/drivers/net/phy/Kconfig > +++ b/drivers/net/phy/Kconfig > @@ -60,6 +60,16 @@ config SMSC_PHY > ---help--- > Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs > > +config SMSC_PHY_DISABLE_AUTOX > + bool "Disable MDI-X upon start" > + depends on SMSC_PHY > + ---help--- > + When you experience problems estabishing a stable connection > + to a network and you have e.g. a LAN8710 ethernet phy > + this option might help you out. > + > + In doubt, say N > +
I am not sure whether compile-time option for something like this is appropriate. Kernel module parameter, perhaps?
Of course it'd be far better if faulty hardware can be autodetected in runtime.
-- Jiri Kosina SUSE Labs
| |