lkml.org 
[lkml]   [2012]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] ARM/dts: omap3: Add DT support for IGEP devices
Date
IGEP technology devices are TI OMAP3 SoC based industrial embedded
and computer-on-module boards. This patch-set adds initial device
tree support for these devices.

The device tree allows to boot from an MMC/SD and are working all
the components that already have device tree support on OMAP3 SoCs:

- MMC/SD
- UARTs
- GPIO LEDs
- TWL4030 codec audio
- pinmux/pinconf pinctrl

Some peripheral are still not working such as Flash storage and
Ethernet but support for these will also be included once the
OMAP GPMC device tree binding patches hit mainline.

This is a v2 of the patch-set that solves issues pointed out by
Enric Balletbo and it is composed of the following patches:

[PATCH v2 1/3] ARM/dts: omap3: Add generic DT support for IGEP devices
[PATCH v2 2/3] ARM/dts: omap3: Add support for IGEPv2 board
[PATCH v2 3/3] ARM/dts: omap3: Add support for IGEP COM Module

Best regards,
Javier


\
 
 \ /
  Last update: 2012-11-30 11:41    [W:0.348 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site